Miscellaneous - Adata, Knipex, OKI, Romagna Plastic, Sensor (431)

Knipex switch cabinet key, short version For all common shut-off systems in gas, water and electricity supply, as well as for technical equipment in buildings such as air-conditioning and ventilation systems, stop valves, mains switchboards etc. Square 6

Knipex crimping die for KN 97 43 200. For crimping MNL BK1 and MNL SK1.

Spare cutting wheel for the tube cutter TubiX® made of high-quality ball-bearing steel.

Combination pliers, lightweight, with cutting edges for hard and soft wire, long cutting edges for thicker cable. Blades additionally inductively hardened. Length: 200 mm Head chrome-plated, handles VDE-insulated, 1000 V. Cutting force: Soft wire up to 3.

head mirror polished, handles with multi-component grips, pointed head

head burnished, handles with multi-component grips

Knipex latest-generation crimping lever pliers with reduced manual force by up to 30% compared to commercially available crimping pliers owing to innovative lever transmission, two-handed operation for easy crimping of large conductor cross-sections. Adju

round tips, approx. 2 mm wide straight pattern smooth gripping surfaces

Electronics side cutters 115 mm Pointed mini-head with small facet. For wire diameter 0.3 - 1.5 mm (soft)/0.5 mm (hard) Box joint, play-free precision joint, low-friction double spring. Mirror-finish surface, blades additionally inductively hardened. Cutt

Pantograph pliers produced from oil-hardened vanadium steel. Long, flat-round jaws With serrated gripping surfaces with 40° curved shape. Blades additionally inductively hardened for medium-hard and hard wire. Cutting edge hardness: approx. 59 HRC For sof

Connect mobile devices to your PC or MacBook with this USB C 3.0 cable to experience the ultimate all-in-one connectivity solution. Perfectly suitable for charging and high-speed data transfer. USB cable

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

Cable knife with protective cap. VDE-tested 1000 V. Non-insulated blade backs. Length: 180 mm

IEC 60900 DIN EN 60900 ASTM F1505 • Full insulation reduces the risk of short circuit • For counter fitting and counter lock • Plastic, glass-fibre reinforced • Handles with soft plastic zone for a secure hold With the high-quality and robust plastic p

For PVC-insulated flat cable up to max. width of 12 mm and 0.75 to 2.5 mm² Adjusts automatically to different conductor heights: therefore no damage to conductor Large stripping length possible Replaceable knives Smooth mechanical action Low weight Housin

pliers black atramentized, head polished, handles plastic coated

- Highly flexible ultra high-speed HDMI® 2.1 cable with SmartFLEX technology - Resolutions up to 8K / UHD-2 at 60Hz and 4K / UHD at 240Hz - High quality cable construction, triple shielding and soft PVC cable jacket - Supports Display Stream Compression (

KNIPEX flat nose pliers 160 mm • Flat, short, wide jaws • Serrated gripping surfaces • Chrome vanadium electric steel, forged, oil-hardened Length: 160 mm

KNIPEX power combination pliers 180 mm For heavy-duty applications with 35% less force required thanks to new, improved lever ratios. The optimally positioned joint allows easier cutting, as well as powerful gripping, bending and pulling. Inductively hard

housing for USB-A plug, transparent

87 09 180 V01 Protective jaws 87 xx 180 (3 pairs)

• For delicate cutting tasks, e.g. in electronics and precision mechanics • Robust, box and play-free joint • Low-friction double spring for gentle and smooth opening • The polish or mirror finish (design 2 only) in conjunction with a fine oil film off

High-speed HDMI® cable with Ethernet 3.0 metre HDMI® A plug>HDMI® C plug Properties: </b

KNIPEX power side cutters 180 mm Produced from oil-hardened chrome-vanadium electric steel with forged pivot axis for the toughest stresses. Inductively hardened precision cutting edges are suitable for piano wire as well as for soft wire. New 2-component

Knipex crimping die For KN 97 43. For insulated cable shoes 10-16 mm².

pliers burnished, handles with non-slip plastic covers nsulated and non-insulated end sleeves (ferrules)

Nickel-plated pliers Shape 0: jaws for round material, with wire strippers Hold round, shaped and flat material securely High load capacity With adjusting screw and release lever One hand operation High clamping pressure owing to knee lever ratio Pliers b

Active USB 3.2 Gen 1 extension cable - for data rates of up to 5Gbit/s over a distance of 10 m! - Active USB 3.0 / USB 3.2 Gen 1 extension cable - With Type C plug and Type A socket - For hubs, USB sticks, external hard drives, printers or other devices

head mirror polished, handles with multi-component grips, round head

Set of four module adapters for the Modular X18 tool backpack

KNIPEX side cutting pliers Special tool steel, oil hardened and tempered for the toughest demands. Especially popular with craftsmen due to precision of machining, high wear resistance and balanced weight distribution. Black atramentised, polished head. L

Roll-up bag with 15 compartments made of durable polyester fabric. With practical, adjustable quick release fastener. Dimensions, opened (L x H): 830 x 310 mm.

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

With electrically conductive coating: Universal ESD tweezers balance and control potential differences between their user and the components. They meet the requirements of the electronics and precision mechanics industry and protect sensitive components.

Knipex positioning aid for KN 97 49 68.

Harting male insert for HAN EE modules Number of pins: 8 Current: 16 A Conductor cross section: 0.5 - 4.0 mm² Crimps supplied separately.

pliers burnished, handles with plastic grips Style 0: with bevel

KNIPEX electronics side cutters, pointed head, without bevel Smooth, low-friction movement owing to precision-ground, play-free screwed joint. Polished in glare-free finish with ergonomic 2-component grip casings and smooth opening spring. The shape, choi

Compact Bolt Cutters for powerful cutting of larger cross-sections as well as very hard materials two-hand operation for maximum cutting force 60 % less effort required compared to high leverage diagonal cutters of the same size 40-fold increase of manual

pliers burnished, handles with plastic grips Style 2: with small bevel