Miscellaneous - CnMemory, Gedore, Romagna Plastic (268)

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and

Straight Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Chrome-vanadium steel

Blade from bit steel, matt chrome-plated Contents: Hexagon screwdriver 2.5 3 4 5 6 8 mm Matt chrome

Made from chrome-vanadium steel Striking end tempered Shaft copper, tip paint-coated in silver Vanadium Steel

Hammer head forget, black varnished, striking faces polished Striking surface inductively case-hardened for tough long-term work Acc. to DIN 6474 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking face Doub

Acc. to DIN ISO 2936 GEDORE vanadium steel 61CrSiV5, zinc-plated Acc. to DIN ISO 2936 Chrome vanadium steel 61CrSiV5, galvanised

This SD Express memory card by Delock is particularly suitable for photo and video applications, as the PCI Express standard allows large data to be exchanged very fast. Supports UHS-I U3 V30 The memory card supports the NVMe protocol as well as th

Chrome-vanadium steel, ISO-nickel-plated Chrome-vanadium steel, ISO-nickel coated

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Rubber straps and pockets for inserting tools For orderliness and more storage space Mounting material is included in delivery Mounting material for L-BOXX® 136 is included

Hammer head forget, black varnished, striking faces polished Striking surface inductively case-hardened for tough long-term work Acc. to DIN 6474 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking face Doub

Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished 116 L = long pattern

Matt chrome-plated For hand-operated sockets Square drive as per DIN 3120 - C 12,5, ISO 1174, with ball retention groove Coupler based on DIN 3120 - A 12,5, ISO 1174, with ball lock Chrome-vanadium steel

With clamping wrench With clamping wrench

One tool that works like a spanner and pliers DIN ISO 5743 Can replace two complete open-ended spanner sets, metric and inch, gripping size 0 - 52mm/0 - 2'' Careful assembly of bolt connections with delicate surfaces (e.g. chrome-plated fittings) Adjustab

Consisting of universal pliers 142 10 TL, power combination pliers 8250-200 JC and power side cutter 8314-180 JC, Swedish pattern Best cutting power (Bcp) reveals the optimum cutting point under perfect power utilisation 8314-180 JC Power side cutter: Hig

With indented grip Dimensions: 450 x 210 x 30 mm Dimensions: 450 x 210 x 30 mm

Acc. to DIN 838, ISO 3318, ISO 1085, ISO 10104 5° offset Thin walled rings Chrome-vanadium steel Matt satin chrome-plated finish In holder

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

Hex recess drive for bits 1/4'' With powerful magnetic holder Bit holder with powerful magnet Elongated hole in the handle for hanging up Chrome-vanadium steel

With ash handle 65 Shore D 65 Shore D

Acc. to DIN 3122, ISO 3315 Small, drop shaped head for confined areas Fine-toothed (60 teeth), with lever change and push-button release Return angle 6 degrees Non-slip 2-component handle with hanging hole For hand-operated sockets and accessories with sq

Suitable for nuts up to property class 6 With chisel stopper With chisel stopper

Surface chrome-plated with black tip With 2-component handle Hard component from PP, non-slip soft component from TPV Contents: slotted screwdriver 3 5.5 6.5 mm cross-head screwdriver PH 0 1 2 Elongated holes in the handle for hanging up

Acc. to DIN 3123, ISO 3316 For hand-operated sockets and accessories with square drive as per DIN 3120, ISO 1174, ball locking device Vanadium steel 31CrV3, chrome-plated

With internal hexagon drive as per DIN ISO 1173 With square drive as per DIN 3120 - C 6,3 (1/4'') or C 10 (3/8'')

In transparent plastic box In transparent plastic box

Carefully hardened and tempered along the full length Striking heads inductively tempered With black protective hand guard for safe comfortable working

Combination pliers 180 mm Side cutter 160 mm Telephone pliers 200 mm

For controlled tightening of wheel nuts on light-alloy rims Plastic sleeves for damage-free work on aluminium wheel rims Colour coding for ease in identifying the right size Machine-operated, fixing with safety ring / pin Phosphated surface Square drive a

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Clamping reach 125 mm, chuck for pipes with 13.5 - 56 mm Ø Precise guidance With anvil Max. clamping force 25 KN With anvil Max. clamping force 25 KN Cast-iron

Superior service life and reliability in industrial applications Kingston's industrial microSD card is designed and tested to withstand even the most demanding environmental factors. With an operating temperature of -40 to 85°C, it operates normally even

Drain valve holder and screw-in wrench for eccentric and standard valves 1.1/4” Usable from top or bottom Usable from top or bottom

3-component handles Power-Grip3 with striking cap Ergonomic handle design enables precise and fatigue-free working Positive-fit joint of handle and blade for optimum transmission of force Hexagon blade with additional hexagon bolster Blade from GEDORE mol

In transparent plastic box In transparent plastic box

Made from hardened and tempered steel to EN 10083 Enamelled blue, with ground faces Painted blue, worktops sanded