Monitors (21)

Description: A module with 4 Digits divided into a 7-Segment display. The driver IC is TM1637. It can be used to display numbers, letters, etc. Details: 4 Digits red alpha-numeric display 8 adjustable light-Level Input voltage: 3.3~5.25 V DC Interface lev

This 7-Segment LED module with 8-Bit relies on the widely used MAX7219 driver for Driving the individual segments. The module allows you, with only three I/O control Pins in an eight-digit 7-segment display!

1. Size: 41.6mm (length) * 19.1mm (width) * 15.3mm (H) 2. Supply voltage: 2.5-6V 3.PCB Color: Black 4. Support I2C protocol 5. The power control with backlight can be set via jumpers backlight power supply is connected. Plug jumper to connect the backlig

With our popular LCD Keypad Shield, you have a display with control elements in one module! Ideal for short-term projects to fruition or to develop menus. For microcontrollers like the popular Arduino family documented libraries such as NewliquidCrystal e

Available in Green or Blue. The 12864B module has an internal boost circuit that supports 3V to 5.5V. The default 4.5V voltage contrast display is the best. If the voltage is 5V or 3V and other voltages, please change the VR1 adjustable potentiometer on

Description: LCD Display 84 x 48 pixels with backlight for Nokia 5110 Arduino Joystick PS2 Gamepad Nokia 5110 is a basic graphic LCD screen for lots of applications. It uses the PCD8544 Controller used in Nokia 3310 LCD. Very low power consumption! Resol

4 LED Matrix Displays, on a circuit Board The 64 (8x8) LEDs Control of all LEDs via a single data cable LED matrices to form a composite switchable The 32x8 LED composite Matrix measures 130 x 32 x 19.5 mm total of The red glowing LED dots have a diameter

Monochrome 0.96"OLED Display with 128 x 64 pixels (white or blue) This Display is a 3 inches screen size very small and high contrast legible. The Display is made of 128x64 OLED pixels are controlled by the built-in SSD1306 Chip individually. Since Pixel

LED Matrix Display With 64 (8x8) LEDs Control of all LEDs via a single data cable LED matrices to form a composite switchable The red glowing LED dots have a diameter of 3 mm and a 1 mm space between the module Operating voltage: 5 v dimensions: length 3.

Available in Green or Blue. HD44780 1602A Blue/ Yellow-Green LCD Display Logic working voltage (Vdd): +4.8~+5.2V LCD drive voltage (Vdd-Vo): +3.0~ +5.0V Storage temperature (Tsto): -30~+ 80C (wide temperature) Working temperature (Ta): -20~+70C (wide t

Available in Green or Blue. This 20x4 LCD module with a built-in HD44780 Controller allows for the display of 20x4 characters in white font on a blue background. The control of the display, for example, via an Arduino, Raspberry Pi, etc., the connection o

Model: E3D V6 Size: 20*16*12mm Suitable nozzle: M6 Screw thread

This full graphic smart controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included. After connecting this panel to your Ramps you don't n

3.2 inch 320 * 240 8Bit or 16Bit parallel interface TFT LCD Module Driver Board Display Screen with Touch Panel 3.2-inch color screen, support 16BIT RGB 65K color display, display rich colors 240x320 resolution for clear display Support 8-bit/16-bit paral

This is snap-on module (shield) for Arduino Uno or boards with compatible pinout. 2.4" LCD TFT display 240X320 Bright, 4 white-LED backlight, on by default but you can connect the transistor to a digital pin for backlight control Colorful, 18-bit 262,000

Resistive touch control Supports any revision of Raspberry Pi (directly-pluggable), Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions Size perfectly fits the Raspberry Pi High quality immersion gold surface plating 3 buttons Supported by Rasp

Available in Green or Blue. HD44780 1602A Blue/ Yellow-Green LCD Display Logic working voltage (Vdd): +4.8~+5.2V LCD drive voltage (Vdd-Vo): +3.0~ +5.0V Storage temperature (Tsto): -30~+ 80C (wide temperature) Working temperature (Ta): -20~+70C (wide te

Available in Green or Blue. This 20x4 LCD module with a built-in HD44780 Controller allows for the display of 20x4 characters in white font on a blue background. The control of the display, for example, via an Arduino, Raspberry Pi, etc., the connection o