Miscellaneous - 2-Power, Adata, AutoCell Electronics, Max Studio, Romagna Plastic, Sensor (876)

LED switching power supply from the HVGC-100 series. This series is characterised by IP65 protection. These power supplies can be used for outdoor and indoor applications. • Universal input • Overload protection via current limit, auto recovery • Protecte

Use first-generation Thunderbolt and Thunderbolt 2 devices with your new Thunderbolt 3 computer. With this adapter, you can connect Windows and Mac based Thunderbolt™ 3 computers to older Thunderbolt devices, such as external hard drives, Thunderbolt disp

Brother AD-24ES - mains adapter (9 V-1.6 A) For the following models: P-Touch 60, P-Touch 65, P-Touch 80, P-Touch 90, P-Touch 1000, P-Touch 1005F, P-Touch 1010, P-Touch 1090, P-Touch 1230PC, P-Touch 1250/S, P-Touch 1260, P-Touch 1280/CB/DT/VP, P-Touch 129

This power cable by Delock can be connected to a 4 pin power port of a power supply and can supply power to a floppy drive. Specification • Connector: 4 pin power connector male > 4 pin floppy female • Cable gauge: 18 AWG • Length: ca. 40 cm (incl. connec

For connecting modern USB 3.0/USB 3.2 Gen 1 devices equipped with Micro-USB connections. High-quality SuperSpeed USB 3.0/USB 3.2 Gen 1 cable with improved shielding. High-quality contacts for less wear during high mating cycles. Suitable for data transfer

LED switching power supply from the PLD-40 series. The overload protection, an internal PFC switching circuit and a short-circuit protector are just a few of the positive characteristics of the PLD-40 series, which make the excellent switching power suppl

Power cord 2.0 metres Device extension lead IEC 60320 C7>C8 • H03VVH2-F2X 0.75 mm² • Male IEC-60320-C8 • Female IEC-60320-C7 • Colour: white

The LCM-25KN series is a 25-W AC/DC constant current power supply unit for LEDs with levels that can be selected via DIP switch and a KNX interface to avoid the use of complicated KNX-DALI gateways. LCM-25KN operates with an input voltage of 180 to 277 V

• Dimmable version (external voltage 0 - 10 V DC, PWM) • Overload protection via current limit, auto recovery • Protected against short circuit, over-temperature, over-voltage • Integrated PFC switching circuit • Insulation class II • For internal applica

This converter by Delock enables you to connect you mSATA module via the micro USB port or the USB pin header connector to your Raspberry Pi. Technical data • Connections: 1 x USB 2.0 type Micro-B female 1 x 5-pin USB 2.0 pin header (4 pins connected) 1

Technical specification: - Connection 1: Power cord safety plug Typ E+F (CEE 7/7, straight) - Connection 2: C13 (straight) - Wire: H05-VV-F (3G), VDE approved - Core cross-section: 0,75 mm² - Number of cores: 3 - Max. current capacity: 10 A / 250 V - Ins

The maximum USB cable length is 5 meters in accordance with standard. With this LogiLink cable repeater you can extend your USB 2.0 cable length to 15 meters. Through the shielding, it is protected from electromagnetic interference. Connector 1: USB 2.0 A

The power supply units from the NPF-90 series from MEAN WELL have a 90 W single output and a built-in active PFC function. The input voltage range is 90 to 305 V AC. With a very low idle power of 0.15 W and a short response time of

YINGJIAO LED power supply unit Technical data General information Series: YSL20F-15 W Enclosure: closed, plastic Dimensions L x W x H (mm): 103 x 35.5 x 16.5 Weight: 85 g Operating life expectancy: 30,000 hours Operating temperature: -20°C to 45°C Storag

TRIDONIC LED power supply unit Technical data General information Series: LC 27W 100-500mA 54V NF SR EXC Enclosure: closed, plastic Dimensions L x W x H (mm): 160 x 82 x 34 Weight: 164 g Operating expectancy: 100,000 hours Operating temperature: -20°C -

TRIDONIC LED power supply unit Technical data General information Series: LC 10W 150-250mA flexC SR SNC4 Enclosure: closed, plastic Dimensions L x W x H (mm): 147 x 43 x 30 Weight: 76 g Operating expectancy: 100,000 hours Operating temperature: -20°C - 4

USB Cable USB 2.0 standard with a maximum transmission speed of 480 Mbps. It corresponds to the UL-2725 standard with a wire size of AWG30. The cable is robust, durable and high quality. By shielding it is protected against electromagnetic interference. C

The SILEX GL-118-2 Y-USB power cable (E1414) was specially developed for the power supply of the SILEX Wireless Bridges BR-300AN and BR-330AC-LP. Y-shaped design The cable has two USB-A connectors that converge to an EIAJ Class 2 DC connector to ensure a

The USB 2.0 hub with active repeater cable that enables you to connect a USB device up to 10m away. This Repeater cable supports data transfer rates up to 480 Mbps and is fully backward compatible with USB 2.0/1.1 devices. Connector 1: USB 2.0 A/Plug Conn

Adapter USB 2.0 A Male to A Female USB 2.0 from LogiLink. Suitable for connecting USB devices. The adapter supports USB 2.0 standard, and thus transfer rates of up to 480 Mbps. Connector 1: USB 2.0 A/Plug Connector 2: USB 2.0 A/Jack Comply with USB Hi-Spe

The XLC-40 series is a 40-W LED driver delivering constant power or output voltage (12 and 24 V) and operating at 110 - 305 V AC. Output current is freely selectable between 600 mA and 1400 mA via dip switch or NFC. With impressive efficiency of up to 88%

USB 2.0 hub, 4-port The DIGITUS USB 2.0 4-port hub enables up to four USB devices to be operated simultaneously on a PC or Mac. Connect your favourite devices and take advantage of the rapid USB 2.0 speed. The product has a simple, elegant design with a

USB 2.0 cable with plug type A to B • TYPE A plug • TYPE B plug, angled Ideal connection cable for cramped conditions at the end device.

LED switching power supply from the PLM-12 series. The overload protection, an internal PFC switching circuit and a short-circuit protector are just a few of the positive characteristics of the PLM-12 series, which make the excellent switching power suppl

10-cm micro-USB power cable with open cable ends Length: approx. 10 cm

This cable gland by Delock allows a watertight seal to the housing and is ideal for feeding through three round cables or electrical tubes. IP68 dust and waterproof The integrated seal also offers increased protection against dirt and moisture. Multifunct

USB-C port for data and power Charge your USB-C device from a USB-A source. Supports power and data signals.

DC connection cable • Cross-section: 2 x 0.50 mm²

Delock USB 2.0 A plug > USB micro-B plug, spiral cable This data and charging cable can be used to connect devices with USB micro-B connectors, such as mobile phones or digital cameras, to a free USB port. The spiral cable allows it to be easily stowed aw

USB 3.0 SuperSpeed adapter cable Makes it possible to connect A plugs to devices with type C socket For synchronising and recharging at up to 4.5 W Type C plug can be used on both sides Backward compatibility with USB 2.0 and 1.1

Angled aerial connector 9.5 mm - angled aerial coupling 9.5 mm 2.5 m Inner conductor: 0.5 mm First shielding: double aluminium foil Second shielding: aluminium braided 128 x 0.12 > 85 dB, Class A BZT No. KU 11 888 Colour: white

This cable is suitable for connecting a device to a computer. 1x USB 2.0 Cable

Python® Series - Give your equipment that certain bite. Connection cable DisplayPort 2.0 with locking protection - Resolutions up to 8K / UHD-2 @60Hz and 4K / UHD @240Hz - ideal for gaming applications - Galvanised full metal housing and gold-plated conn

SATA 15-pin connector 2x SATA 15-pin ports gold-plated 0.15 m round PVC multicolour box This power cable is used to power 2 SATA hard drives via a 15-pin SATA port.

Upgrade your connectivity with the FiberX® - FX Series USB 3.2 Gen 1 Active Optical Cable. This hybrid cable features a USB-C plug to USB-C plug connection, providing a secure and versatile connection for professional applications. With a PD of 60W (20V/3

Safety plug (type F, CEE 7/7) > Device socket C13 (IEC connection)

Mains power cable, 3-pin safety plug. Cloverleaf plug, angled safety plug.

The existing USB-A connector and the USB-B connector on the USB 2.0 cable ensure that USB peripherals such as hard disks, printers and cameras can also be connected over longer distances. No additional drivers or similar equipment need to be installed - t

Hi-Speed USB 2.0 cable for connecting a PC or notebook with a USB-C port to a peripheral device with a USB-B port, e.g. printer, scanner or external hard drive. - For connecting a PC/notebook with a USB Type-C port to a peripheral device with a USB 2.0 T

Power cord: 1.0 m Europlug CEE 7/16> Double female IEC 60320 C7 Rated voltage 250 V Nominal current 2.5 A Cable length 100 cm Type A connector name Europlug Plug type A CEE 7/16 Type B connector IEC 60320-C7 Cord specification H03VVH2-F 2x0.75 mm² Colour