Miscellaneous - 2-Power, Adata, Dsquared2, Romagna Plastic (883)

USB 2.0 connector (type A) > USB 2.0 socket (type A) 90° Technical data Connections Connection, type: USB 2.0 connector (type A) Connection 2, type: USB 2.0 socket (type A) 90° General Package type: Bulk Unit: 1 In plastic bag Certifications: WEEE, CE

This cable gland by Delock allows a watertight seal to the housing and is ideal for feeding through two flat cables or electrical tubes. IP68 dust and waterproof The integrated seal also offers increased protection against dirt and moisture. Multifunction

Hi-Speed USB 2.0 cable for connecting a PC or notebook with a USB-C port to a peripheral device with a USB-B port, e.g. printer, scanner or external hard drive. - For connecting a PC/notebook with a USB Type-C port to a peripheral device with a USB 2.0 T

This power cable by Delock can be connected to a 4 pin floppy power connector of a power supply unit and enables the power supply of a drive with SATA 15 pin interface. Specification • Connector: 15 pin SATA power connector male > 4 pin floppy male • Cabl

The USB 2.0 to serial adapter can be used to connect up to four serial devices via one USB port. Technical data • MosChip chipset • 4 X RS232 serial interfaces with DB9 connectors • Plug with nuts • Data transfer rates of up to 921.6 Kb/s • LED display •

USB 2.0 extension cable, approx. 60 cm For extension of USB A connector to USB A socket. Ideal for USB 2.0 drives with poorly accessible or side USB ports.

LED switching power supply from the HVGC-100 series. This series is characterised by IP65 protection. These power supplies can be used for outdoor and indoor applications. • Universal input • Overload protection via current limit, auto recovery • Protecte

Use first-generation Thunderbolt and Thunderbolt 2 devices with your new Thunderbolt 3 computer. With this adapter, you can connect Windows and Mac based Thunderbolt™ 3 computers to older Thunderbolt devices, such as external hard drives, Thunderbolt disp

Brother AD-24ES - mains adapter (9 V-1.6 A) For the following models: P-Touch 60, P-Touch 65, P-Touch 80, P-Touch 90, P-Touch 1000, P-Touch 1005F, P-Touch 1010, P-Touch 1090, P-Touch 1230PC, P-Touch 1250/S, P-Touch 1260, P-Touch 1280/CB/DT/VP, P-Touch 129

This cable is mostly used to connect a printer, scanner or hard disk to a computer. 1x USB 2.0 Cable

The existing USB-A connector and the USB-B connector on the USB 2.0 cable ensure that USB peripherals such as hard disks, printers and cameras can also be connected over longer distances. No additional drivers or similar equipment need to be installed - t

The LCM-40TW series is an LED driver with 40-W constant output power and two channels for the Tunable White function. It can be operated at 180 to 277 V AC. The output current is between 500 mA and 1050 mA and can be selected via a DIP switch. With impres

Upgrade your connectivity with the FiberX® - FX Series USB 3.2 Gen 1 Active Optical Cable. This hybrid cable features a USB-C plug to USB-C plug connection, providing a secure and versatile connection for professional applications. With a PD of 60W (20V/3

LED switching power supply from the PLM-12 series. The overload protection, an internal PFC switching circuit and a short-circuit protector are just a few of the positive characteristics of the PLM-12 series, which make the excellent switching power suppl

USB 2.0 extension cable USB 2.0 high-speed extension cable with USB-A connector to USB-A port. Data transfer rates of up to 480 Mbps.

LED switching power supply from the PLD-40 series. The overload protection, an internal PFC switching circuit and a short-circuit protector are just a few of the positive characteristics of the PLD-40 series, which make the excellent switching power suppl

Power cord 2.0 metres Device extension lead IEC 60320 C7>C8 • H03VVH2-F2X 0.75 mm² • Male IEC-60320-C8 • Female IEC-60320-C7 • Colour: white

The LCM-25KN series is a 25-W AC/DC constant current power supply unit for LEDs with levels that can be selected via DIP switch and a KNX interface to avoid the use of complicated KNX-DALI gateways. LCM-25KN operates with an input voltage of 180 to 277 V

• Dimmable version (external voltage 0 - 10 V DC, PWM) • Overload protection via current limit, auto recovery • Protected against short circuit, over-temperature, over-voltage • Integrated PFC switching circuit • Insulation class II • For internal applica

Technical specification: - Connection 1: Power cord safety plug Typ E+F (CEE 7/7, angled) - Connection 2: C13 (straight) - Wire: H05-VV-F (3G), VDE approved - Core cross-section: 0,75 mm² - Number of cores: 3 - Max. current capacity: 10 A / 250 V - Insul

This converter by Delock enables you to connect you mSATA module via the micro USB port or the USB pin header connector to your Raspberry Pi. Technical data • Connections: 1 x USB 2.0 type Micro-B female 1 x 5-pin USB 2.0 pin header (4 pins connected) 1

Technical specification: - Connection 1: Power cord safety plug Typ E+F (CEE 7/7, straight) - Connection 2: C13 (straight) - Wire: H05-VV-F (3G), VDE approved - Core cross-section: 0,75 mm² - Number of cores: 3 - Max. current capacity: 10 A / 250 V - Ins

DC/DC converter 26 V - 48 V to 24 V/1 A The DCC4824 is a 24 V DIN rail buck converter with an output current of 1 A. It is used in narrow control cabinets that require an additional lower output voltage. The functional input voltage is 2 V above the desir

MEAN WELL LED switching power supply from the PLP-20 series • Open design (open-frame) • Universal input • Overload protection via current limit, auto recovery • Protected against short circuit, overload, excess voltage • Integrated PFC switching circuit

MEAN WELL LED switching power supply from the PLP-60 series • Open design (open-frame) • Universal input • Overload protection via current limit, auto recovery • Protected against short circuit, overload, excess voltage • Integrated PFC switching circuit

MEAN WELL LED switching power supply from the PLP-30 series • Open design (open-frame) • Universal input • Overload protection via current limit, auto recovery • Protected against short circuit, overload, excess voltage • Integrated PFC switching circuit

The power supply units from the NPF-90 series from MEAN WELL have a 90 W single output and a built-in active PFC function. The input voltage range is 90 to 305 V AC. With a very low idle power of 0.15 W and a short response time of

EasyLan® DualBoot® LED patch cable RJ45/RJ45 shielded, Cat.6, 500 MHz, halogen-free, 1: 1 assignment, with light identification of the saCon plugs Fields of application: • IEEE 802.3, 10Base-T, 100Base-T, 1000Base-T, 1GBase-T, 10GBase-T, IEEE 802.5, 16 MB

EasyLan® DualBoot® LED patch cable RJ45/RJ45 shielded, Cat.6, 500 MHz, halogen-free, 1: 1 assignment, with light identification of the saCon plugs Fields of application: • IEEE 802.3, 10Base-T, 100Base-T, 1000Base-T, 1GBase-T, 10GBase-T, IEEE 802.5, 16 MB

YINGJIAO LED power supply unit Technical data General information Series: YSL30T-45 W Enclosure: closed, plastic Dimensions L x W x H (mm): 251 x 30 x 17 Weight: 150 g Operating life expectancy: 30,000 hours Operating temperature: -20°C to 45°C Storage t

TRIDONIC LED power supply unit Technical data General information Series: LC 27W 100-500mA 54V NF SR EXC Enclosure: closed, plastic Dimensions L x W x H (mm): 160 x 82 x 34 Weight: 164 g Operating expectancy: 100,000 hours Operating temperature: -20°C -

TRIDONIC LED power supply unit Technical data General information Series: LC 10W 150-250mA flexC SR SNC4 Enclosure: closed, plastic Dimensions L x W x H (mm): 147 x 43 x 30 Weight: 76 g Operating expectancy: 100,000 hours Operating temperature: -20°C - 4

USB 3.2 Gen1x1 5Gbps Data Transmission Cable: Reliable Connectivity and High-Quality Performance Pre-assembled with blue strain relief. The USB 3.2 Gen1x1 cable offers a range of features for seamless data transmission. With its compact design and high-sp

The USB 2.0 hub with active repeater cable that enables you to connect a USB device up to 10m away. This Repeater cable supports data transfer rates up to 480 Mbps and is fully backward compatible with USB 2.0/1.1 devices. Connector 1: USB 2.0 A/Plug Conn

USB 2.0 hub, 4-port The DIGITUS USB 2.0 4-port hub enables up to four USB devices to be operated simultaneously on a PC or Mac. Connect your favourite devices and take advantage of the rapid USB 2.0 speed. The product has a simple, elegant design with a

USB-A connecting cable, straight, 2 m, IP67 Suitable for: PowerScan PM9600

USB 2.0 cable with plug type A to B • TYPE A plug • TYPE B plug, angled Ideal connection cable for cramped conditions at the end device.

LED switching power supply from the PLM-12 series. The overload protection, an internal PFC switching circuit and a short-circuit protector are just a few of the positive characteristics of the PLM-12 series, which make the excellent switching power suppl

This cable gland by Delock allows a watertight seal to the housing and is ideal for feeding through three round cables or electrical tubes. IP68 dust and waterproof The integrated seal also offers increased protection against dirt and moisture. Multifunct

Easily connect serial devices via USB port • Complies with USB 2.0 specifications • Supports the RS485 serial interface • Can be used e.g. for PDAs, modems and many other serial devices • Incl. USB extension cable approx. 80 cm • Supports Windows 7, Vista