Miscellaneous - 2-Power, Durable, Intel, Romagna Plastic (800)

Official plug-in switching power supply with EU plug input and microUSB plug output for the Raspberry Pi 3B(+) and Zero (W/WH) and to power a variety of other devices. Technical data • Output voltage: +5.1 V DC • rated load current: 2.5 A • maximum power

USB 2.0 micro Bluetooth 4.0 class 2 adapter Supports dual-mode, Bluetooth® 4.0 and Bluetooth® 3.0 Particularly low power consumption CSR Bluetooth® chipset Operating range up to 10 m Supported profiles: A2DP, AVRCP, serial port, mouse, keyboard, objec

- Highly flexible USB-C™ and DisplayPort 1.2 cable with SmartFLEX technology. - Resolutions up to 4K / UHD at 60Hz - Data rate: max. 21.6 Gbit/s - High-quality cable construction, triple shielding and soft PVC cable jacket The SmartFLEX USB-C™ to DisplayP

Technical specification: - Connection 1: Power cord safety plug Typ E+F (CEE 7/7, angled) - Connection 2: C13 (straight) - Wire: H05-VV-F (3G), VDE approved - Core cross-section: 1,00 mm² - Number of cores: 3 - Max. current capacity: 10 A / 250 V - Insul

This Delock power cable enables you to connect your mainboard with 8 pin EPS interface to a power supply with 4 pin connector. If the power consumption of the mainboard is very high you need to connect both 4 pin plugs to the power supply. Specification

Cable to connect an external hard disk to a PC. USB 3.0 cable

Power supply cable for S-ATA hard drives • Power connection adapter for SATA-HDD • 1 x 15-pin SATA to 4-pin +1 x 4-pin

Delock Charging Cable USB 2.0 Type-A male > USB 2.0 Micro-B male with switch for Raspberry Pi 1.5 m This Delock USB charging cable can connect to a free standard USB A interface. By using the on / off switch the power supply for the connected device can s

USB 2.0 HighSpeed cable Data transfers up to 480 Mbps For synchronising and recharging at up to 2.5 W Type C plug can be used on both sides Backwards compatible with USB 1.1

USB 3.2 Gen 2x2 cables in SuperSpeed quality offer transmission with up to 20 Gbit/s and support Power Delivery with up to 100W (20 V 5A) - USB 3. 2 Gen 2x2 cable in high quality with improved shielding - With the reversible Type C connector on both ends

This power cable by Delock can be connected to a 4 pin floppy power connector of a power supply unit and enables the power supply of a drive with SATA 15 pin interface. Specification • Connector: 15 pin SATA power connector male > 4 pin floppy male • Cabl

Python® Series - The certain bite for your equipment! Connection cable DisplayPort 1.4 with locking device to HDMI 2.0 - Resolutions up to 4K / UHD @60Hz - Galvanised full metal housing and gold-plated plugs - High-quality cable structure, triple shieldi

USB 2.0 USB-A connector USB-B connector 10 W 480 Mbps Nickel-plated 1 m Round PVC Black Label

USB 2.0 extension cable, approx. 60 cm For extension of USB A connector to USB A socket. Ideal for USB 2.0 drives with poorly accessible or side USB ports.

Technical specification: - Connection 1: Power cord safety plug Typ E+F (CEE 7/7, straight) - Connection 2: C13 (straight) - Wire: H05-VV-F (3G), VDE approved - Core cross-section: 0,75 mm² - Number of cores: 3 - Max. current capacity: 10 A / 250 V - Ins

LED switching power supply from the HVGC-100 series. This series is characterised by IP65 protection. These power supplies can be used for outdoor and indoor applications. • Universal input • Overload protection via current limit, auto recovery • Protecte

This Delock adapter with EASY USB plug can be inserted into a USB A socket either way up. It can be used to expand your existing USB-A plug with this adapter. The plug can then be used either way up to make insertion easier. Technical data • Connectors:

This power cable by Delock can be connected to a 4 pin power port of a power supply and can supply power to a floppy drive. Specification • Connector: 4 pin power connector male > 4 pin floppy female • Cable gauge: 18 AWG • Length: ca. 40 cm (incl. connec

USB 3.2 Gen 2x2 cables in SuperSpeed quality offer transmission with up to 20 Gbit/s and support Power Delivery with up to 100W (20 V 5A) - USB 3. 2 Gen 2x2 cable in high quality with improved shielding - With the reversible Type C connector on both ends

This Delock 4-pin cable is used to provide an additional power supply to motherboards via a DC-DC converter. Technical data • Connectors: 4-pin-4-pin plug/plug P4 • Cable length: 30cm • E.g. for Intel or AMD motherboards

This cable is mostly used to connect a printer, scanner or hard disk to a computer. 1x USB 2.0 Cable

This adapter by Delock can be used to angle the Micro USB interface in case the existing Micro USB port is difficult to access. Specification • Connector: USB 2.0 Type Micro-B male > USB 2.0 Type Micro-B female • Angled up • Gold-plated contacts • Colour:

USB 4 Gen 2x2 cable in very high quality with the reversible USB-C connector on both ends for data transfer rates of up to 20 Gbit/s and USB Power Delivery up to 48V / 5A (240 W). - USB 4 Gen 3x2 cable in very high quality with improved shielding - With t

For connecting modern USB 3.0/USB 3.2 Gen 1 devices equipped with Micro-USB connections. High-quality SuperSpeed USB 3.0/USB 3.2 Gen 1 cable with improved shielding. High-quality contacts for less wear during high mating cycles. Suitable for data transfer

This cable is suitable for extending a USB cable. 1x USB 3.0 Cable

Mains cable with safety plug

This adapter can be used to connect two USB 2.0 A male USB 2.0 A male cables to each other. 1x USB 2.0 Adapter

LED switching power supply from the PLM-12 series. The overload protection, an internal PFC switching circuit and a short-circuit protector are just a few of the positive characteristics of the PLM-12 series, which make the excellent switching power suppl

USB 2.0 extension cable USB 2.0 high-speed extension cable with USB-A connector to USB-A port. Data transfer rates of up to 480 Mbps.

Technical specification: - Connection 1: Power cord safety plug Typ E+F (CEE 7/7, angled) - Connection 2: C5 - also called Micky-Mouse-Socket - Wire: H05-VV-F (3G), VDE approved - Core cross-section: 0,75 mm² - Number of cores: 3 - Max. current capacity:

DC/DC converter 26 V - 48 V to 24 V/1 A The DCC4824 is a 24 V DIN rail buck converter with an output current of 1 A. It is used in narrow control cabinets that require an additional lower output voltage. The functional input voltage is 2 V above the desir

The power supply units from the NPF-90 series from MEAN WELL have a 90 W single output and a built-in active PFC function. The input voltage range is 90 to 305 V AC. With a very low idle power of 0.15 W and a short response time of

EasyLan® DualBoot® LED Patch cable RJ45/RJ45 shielded, 4PPoE, Cat.6A, 500 MHz, halogen-free, 1: 1 assignment, with light identification of the saCon plug. Highly shielded patch and connection cable S/FTP compatible with all common RJ45 outlets in distribu

EasyLan® DualBoot® LED patch cable RJ45/RJ45 shielded, Cat.6, 500 MHz, halogen-free, 1: 1 assignment, with light identification of the saCon plugs Fields of application: • IEEE 802.3, 10Base-T, 100Base-T, 1000Base-T, 1GBase-T, 10GBase-T, IEEE 802.5, 16 MB

YINGJIAO LED power supply unit Technical data General information Series: YSL20F-15 W Enclosure: closed, plastic Dimensions L x W x H (mm): 103 x 35.5 x 16.5 Weight: 85 g Operating life expectancy: 30,000 hours Operating temperature: -20°C to 45°C Storag

End caps with strain relief for TRIDONIC LED power supply units Technical data General information Series: ACU SC 43x30MM CLIP-ON SR SET Enclosure: closed, plastic Dimensions L x W x H (mm): 30 x 43 x 30 Weight: 38 g Manufacturer's warranty: 5 years Note

TRIDONIC LED power supply unit Technical data General information Series: LCA 17W 250-700mA one4all SC PR Features: DC-compatible, emergency lighting control gear, output current selectable, output current programmable Operating mode: CC Dimmable: yes I

TRIDONIC LED power supply unit Technical data General information Series: LC 14W 100-400mA flexC NFC SC EXC3 Enclosure: closed, plastic Dimensions L x W x H (mm): 97 x 43 x 30 Weight: 83 g Operating expectancy: 100,000 hours Operating temperature: -20°C

TRIDONIC LED power supply unit Technical data General information Series: LCA 10W 150-400mA one4all SR PRE Features: DC-compatible, emergency lighting control gear, output current selectable, independent control gear, output current programmable Operatin

TRIDONIC LED power supply unit Technical data General information Series: LC 45W 500-1400mA bDW SC PRE2 Features: DC-compatible, output current selectable, emergency lighting control gear, output current programmable Operating mode: CC Dimmable: yes Int