Miscellaneous - 3A Health Care, ECO-Cosmetics, Gedore, Leifheit, MAM, WMF (231)

Combination pliers 180 mm Side cutter 160 mm Telephone pliers 200 mm

With technical and economical benefits due to the variable clamping reach and automatic grip of the legs Especially suited to removing V-belt pulley wheels and flywheels mounted on longer shafts Upgradeable with hydraulic spindle (see table) Upgradeable w

Use: Controlled screw tightening from 40 to 200 Nm Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features: A

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Reduced expense due to versatile use as an engineer’s and recoilless hammer Universal use for service and assembly work With all advantages of a recoilless hammer with higher impact Less energy necessary, easier working With exchangeable splinter-proof, s

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

Sockets hex 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 mm Spark plug socket 16 21 mm Lever change ratchet, fine-toothed, 72 teeth Extension 75 150 mm T-handle Universal joint Adaptor 3/8'' - 1/4'' Dimensions: L 300 x W 180 x D 52 mm Universal joint

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Oval head Dual-material handle, for easy handling For sockets, accessories etc. with square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retention groove 2-component-handle for easy transfer of force 2-component-handle for a hands-friendly transfer

Saw blade 404 A-406 A Saw blade No. 404 A-406 A Bimetal saw blade No. 407 A

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

For controlled tightening of wheel nuts on light-alloy rims Different colours for quick access to the required size Length: 85 mm Contents: Impact sockets 17 19 21 mm Machine-operated, fixing with safety ring / pin Surface phosphated Chrome-molybdenum ste

Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished In PVC holder Long pattern 175 mm Long pattern: 175 mm

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

Surface chrome-plated with black tip With 2-component handle Hard component from PP, non-slip soft component from TPV Contents: TX screwdriver T10 T15 T20 T25 T30 T40 Elongated holes in the handle for hanging up

Swedish pattern, roller with left-hand thread With scale The protected mechanism and additional striking face allow light blows to be applied without impairing the function of the wrench Comfort 2-component handle (versions JC and JP) for fatigue-free wor

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Nearly unbreakable fibreglass handle

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished Shaft blue varnished

36 teeth (return angle 10 degrees) High torque transfer Adjustable from 430 to 580 mm without load reduction Telescopic shaft lockable in 5 positions 2-component handle With swivel head for working in confined spaces, swivels through 180° For sockets, acc

With same size each end, ring offset at 15°, with UD profile Shaft made in girder pattern GEDORE vanadium steel 31CrV3, chrome-plated Overloading indicated by deformation Secure grip thanks to hollow shaft - very ergonomic and handy Glare-free look due to

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

With same size each end, ring offset at 15°, with UD profile Shaft made in girder pattern GEDORE vanadium steel 31CrV3, chrome-plated Overloading indicated by deformation Secure grip thanks to hollow shaft - very ergonomic and handy Glare-free look due to

Inexpensive economy model The legs grip automatically The legs grip automatically

Tool set / socket wrench set, 1/4+1/2'', 100-piece Connecting square drive to DIN 3120, ISO 1174, with ball lock Square drive to DIN 3120, ISO 1174, with ball catch groove 2C reversible ratchet, right-hand/left-hand rotation switchable by lever, push-bu

With locking pin Matt chrome-plated For hand-operated sockets Coupler as per DIN 3120 - D 20, ISO 1174, with locking pin Chrome-vanadium steel

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Water pump pliers 10'', 245 mm Combination plier 180 mm Telephone plier 160 mm Side cutter 160 mm In foam module

Swedish pattern, roller with left hand thread With scale Chrome-vanadium steel Phosphate finish, polished heads Chrome-vanadium steel Phosphated, polished heads With hanging hole

With wolf's jaw

Ergonomic soft rubber hand grips Fixing of the sawblade by simple turning the blue clamping element in the hand grip Clamping piece adjustable by 40° Saw blade bimetal 407 A Captive dowel pins fix the saw blade The combination of lightweight aluminium bra

Oval head Dual-material handle, for easy handling For sockets, accessories etc. with square drive as per DIN 3120 - C 10, ISO 1174, with ball retention groove 2-component-handle for easy transfer of force 2-component-handle for a hands-friendly transfer o

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

High torque transfer Adjustable from 460 to 600 mm without load reduction Telescopic shaft lockable in 5 positions 2-component handle 2-component-handle for easy transfer of force For sockets, accessories etc. with square drive as per DIN 3120 - C 12,5, I

Teeth offset against direction of rotation Roller secured against loss Mouth position 45° angled Teeth offset against direction of rotation Jaws polished Captive adjusting nut Chrome-vanadium steel

With retractable deburring tool Guiding rollers with groove for flared pipes Exact telescope guide Guiding rollers with groove for flared tubes With 4 supporting rollers Metal housing With large turning handle