Miscellaneous - 3M, Adata, AutoCell Electronics, Knipex, PowerPlus, Romagna Plastic (463)

Cable knife with protective cap. VDE-tested 1000 V. Non-insulated blade backs. Length: 180 mm

This USB 2.0 cable connects iPhone, iPad or iPod with Lightning Connector to your computer's USB port for syncing and charging. Or connect it to the Apple USB Power Adapter (AC Adapter) to charge from a power outlet.

USB 3.2 Gen 1 USB-A connector USB micro B connector 5 Gbps Nickel-plated 1.00 m Round PVC Blue Label

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-C socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

Knipex cable knife with ergonomically designed safety handle, interchangeable blade with special cut. With hinged blade guard, integrated in handle, captive. VDE-insulated according to DIN EN 60900 up to 1000 V. Length: 185 mm

Active USB 3.2 Gen 1 extension cable - for data rates of up to 5Gbit/s over a distance of 10 m! - Active USB 3.0 / USB 3.2 Gen 1 extension cable - With Type C plug and Type A socket - For hubs, USB sticks, external hard drives, printers or other devices

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

With the Sandberg sync and charging cable, you can synchronise with your computer and charge the batteries directly from there or from a charging device with a USB port.

Connection cable, axial connector - axial coupling (IEC), highly shielded, class A • Surge impedance 75 ohm• For radio and TV • Type in line with KDG 1 TS 152 (EN 60966-2-5) - Length 10.0 m

For stripping all standard coaxial cables from 4.8 to 7.5 mm in diameter (such as for TV and satellite reception), also suitable for PVC-Flex 3 x 0.75 mm² With length scale from 5.0 to 20.0 mm Two-level, hinged stripping tool With opening spring and lo

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

tool chrome plated, handles with dipped insulation, VDE-tested IEC 60900DIN EN 60900

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 4.5 x 60, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Single-handed crimping lever pliers from KNIPEX For wire end ferrules from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with exce

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

tool burnished, handles with multi-component grips

Unique rotation direction tester for three-phase power supply systems and motors The unique tester Fluke 9062 provides a rotating field and motor rotation indicator display combined with the advantages of non-contact measurement. Fluke 9062 is designed fo

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Positioning tweezers for holding, inserting, and pulling: With dimensionally adapted shapes, the gripping surfaces are ideally suited for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore b

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.0 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Knipex crimping die For KN 97 43. For turned contacts, HTS + Harting.

USB-C port for data and power Charge your USB-C device from a USB-A source. Supports power and data signals.

KNIPEX cable shears with double blade Cuts smoothly and cleanly without crushing. For single and multi-strand copper and aluminium cable. Not suitable for steel wire and hard-drawn copper conductors. KNIPEX cable shears with double blade facilitates cutti

90 31 03 BK KNIPEX TubiX® XL Pipe cutter Spring-loaded QuickLock mechanism holds the tool on the pipe once locked in place. Precise and quick: exact positioning of the cutting wheel on the pipe. High-quality needle-bearings enable the cutting wheel and fo

4-in-1 charging at 100 W The Verbatim 100 W GaN charger combines multiple chargers in a single device: two USB-C PD 100 W connections, a USB-C PD 65 W connection and a USB-A QC 3.0 (EU/UK/US) connection, all in a slim, palm-sized design. This charger is i

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5 - 6 mm².

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

Self-adjusting crimping pliers with side entry for DIN-compliant crimping of wire end ferrules in a profile from 0.08 - 10 mm². Square crimping always ensures optimal contact surfaces. Easy handling, force strengthening, self-releasing lock.

tool burnished, handles with multi-component grips

For Bowden cables and soft wire ropes (including V2A) up to diameter of 3.0 mm Light, clean cut thanks to special cutting edge shape Sickle-shaped cutting edges enclose the cut material and prevent splicing of the wire rope Little force needed owing to

Whether you're planning a road trip or getting out in nature on a camping trip, the Aqiila Powerstation Powerbird S140 is the perfect partner for longer adventures. This powerful and portable power station ensures that you always have plenty of power wher

Premium chisels with self-sharpening effect offer the longest service lifes for the maximum efficiency in terms of results - durable and powerful.

The Sonero active USB 3.0 extension cable has a USB-C connector and a USB-A socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

The combination soldering station for every soldering task and challenge The solution for all application requirements, whether pico-, micro- or high-performance soldering or soldering with forceps, from component size 0402 to 1612 and beyond. Can be easi

KNIPEX power combination pliers 200 mm For heavy-duty applications with 35% less force required thanks to new, improved lever ratios. The optimally positioned joint allows easier cutting, as well as powerful gripping, bending and pulling. Inductively hard

• USB 3.0 • A plug > A socket • SUPER-SPEED • Colour: Black • Length: 5.0m This cable is used to extend the USB 3.0 interface. USB 3.0 is the latest USB standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). Th