Miscellaneous - 3M, General Electric (25)

Flashing LED, 5 mm, yellow, Coloured diffused housing. Beam angle: 60° VF = 5 V (590 nm)/5 - 32 mcd GaAsP/GaP Manufacturer no.: L-56BYD

These LED reflectors by ALBS are no ordinary reflectors. They have been developed further, tested under laboratory conditions and are produced with outstanding attention to detail. They either increase or slightly dampen the colour reproduction value (RA)

recessed mount with external reflector, chrome-plated ready mounted with yellow 3 mm LED Incl. washer and nut Features Installation Ø: 6.0 mm total height: approx. 13.5 mm Reflector head Ø: 6.8 mm Reflector head height: 2.5 mm Wavelength: 585nm yellow

The NA-SAVP6 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP6 anti-vibration pads for up to 2 compatible 200-mm fans (see compatibility information). The anti-vibration pads, made from extra-soft silicone, reduce the transmission

recessed lampholder with internal reflector, chrome-plated ready mounted with yellow 3 mm LED incl. washer and nut Features installation Ø: 6.0 mm total height: approx. 17 mm reflector head Ø: 7.0 mm Reflector head height: 3.0 mm Wavelength: 588 nm y

LED with low power consumption, 2 mA. 5 mm, yellow-coloured housing, diffused Beam angle: 60° (590 nm)/0.8 - 3.2 mcd Manufacturer no.: L-53LYD

• Middle polarization with centre bump • Matches low profile pin strips DIN 41651 • Straight or angled solder pins

CHIP LEDs, type G0805, Length: 2.0 mm Width: 1.25 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing.

CHIP LEDs, type G0603, Length: 1.6 mm Width: 0.8 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-1608YD

The NA-SAVP1 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP1 anti-vibration pads for up to 2 compatible 120/140-mm fans. The NA-AVP1 anti-vibration pads are compatible with the following Noctua fans: NF-A14 FLX NF-A14 PWM chromax

The NA-SAVP3 chromax.yellow set is a fan accessory kit consisting of 16 yellow NA-AVP3 anti-vibration pads for up to 2 compatible 140-mm round frame fans such as the NF-A15 (see compatibility information). The anti-vibration pads, made from extra-soft sil

KM-23YD-F Yellow SOT-23 Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Features: • Yellow (GaAsP/GaP) • Lens Type: Yellow Diffused • SOT-23 package surface mount LED

shiverpeaks®-BASIC-S--Klettverschlussband 19mm, schwarz, 3m · Das Klettverschluß-Band besteht aus einem Band mit Filz-Seite und einem weiteren Band mit einer Haken-Seite. · Ideal geeignet um Kabel zusammen zu binden. · Kann mit der Schere auf jede belieb

• Space-saving low profile design • Centre and dual-slot polarisation • Fits multiple contact strips DIN 41651

• Space-saving low profile design • Centre and dual-slot polarisation • Fits multiple contact strips DIN 41651

SMD Mini PLCC2 reflector LED for all kind of soldering methods usable, especially if customers like to have an LED with metal leadframe, but in a very small housing

Ultra-bright LED, 3 mm, yellow. Coloured housing, transparent. Beam angle: 50° (590 nm)/10 - 50 mcd

CHIP LEDs, type G1206, Length: 3.2 mm Width: 1.6 mm Height: 1.1 mm Yellow, 590 nm, 3.2 - 8 mcd Beam angle: 120° Coloured diffused housing. Manufacturer no.: KP-3216YD

SMD LED with dome lens, yellow, 568 nm, 300 mcd Clear housing Radiation angle: approx. 50° Dimensions (L x W x H): 3.2 x 1.6 x 1.9mm Manufacturer no.: KPTD-3216SYC

Duo-LED, 3 mm, 2-pin, colour change via polarity reversal. red/yellow Colourless housing, diffused Beam angle: 60° 20 mA 8 - 40 mcd

• Aluminium adhesive tape with conducting adhesive • Good conductivity • Effective shielding • Dissipation of electrostatic charges

recessed lampholder with external reflector, chrome-plated ready mounted with yellow 5 mm LED. Incl. washer and nut Features Installation Ø: 8.0 mm Total height: approx. 15.5 mm Reflector head Ø: 9.8 mm Reflector head height: 3.5 mm Wavelength: 590nm