Miscellaneous - Adata, AutoCell Electronics, Gedore, Osram, Romagna Plastic (289)

With technical and economical benefits due to the variable clamping reach and automatic grip of the legs Especially suited to removing V-belt pulley wheels and flywheels mounted on longer shafts Upgradeable with hydraulic spindle (see table) Upgradeable w

SMD-LED • small package • reflow solderable • power: 65 mW

Zener diode Housing: DO-204AL

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

LG P47K PointLED® Description: With a diameter of just 2 mm, the PointLED is one of the smallest packages in its class and achieves high luminous efficacies. Due to its round and flat package, measuring only 0.775 mm high, it is ideal for application wher

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

OSRAM 2er-Pack Filament-LED. based on a E14-Socket opal bulb light current 470 lm by only 4 W nominal capacity

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Saw blade 404 A-406 A Saw blade No. 404 A-406 A Bimetal saw blade No. 407 A

PointLED The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

CHIPLED 0603 The compact chip LED is used as a backlight in a wide variety of applications such as LCDs, dashboards, phones, fax machines, switches and icons, as well as for general use.

BASIC-S--HDMI extension-HDMI plug (A) to HDMI coupling (A), gold platedoldet, ULTRA HD, 3D, HEAC, 0,25m

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished In PVC holder Long pattern 175 mm Long pattern: 175 mm

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.0 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

Active USB 3.2 Gen 1 extension cable - for data rates of up to 5Gbit/s over a distance of 5 m! - Active USB 3.0 / USB 3.2 Gen 1 extension cable - With type C plug and type A socket - For hubs, USB sticks, external hard drives, printers or other devices w

3-in-1 charging at 65 W The Verbatim 65 W GaN charger combines a USB-C PD 65 W connection and a USB-A QC 3.0 connection in a slim, palm-sized design. This charger is ideal for powering your laptops, tablets, smartphones, game consoles etc. at the office,

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Nearly unbreakable fibreglass handle

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished Shaft blue varnished

With same size each end, ring offset at 15°, with UD profile Shaft made in girder pattern GEDORE vanadium steel 31CrV3, chrome-plated Overloading indicated by deformation Secure grip thanks to hollow shaft - very ergonomic and handy Glare-free look due to

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

USB-C port for data and power Charge your USB-C device from a USB-A source. Supports power and data signals.

With same size each end, ring offset at 15°, with UD profile Shaft made in girder pattern GEDORE vanadium steel 31CrV3, chrome-plated Overloading indicated by deformation Secure grip thanks to hollow shaft - very ergonomic and handy Glare-free look due to

Inexpensive economy model The legs grip automatically The legs grip automatically

OSRAM Opto-electronics - FIREFLY LED SMD housing, diffused encapsulation, potting, light emitted to side

• high contrast • improved viewing angle • Controller ST7066U-0A-B • Interface parallel • Technology STN

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Series starters for fluorescent lamps 4 - 22 watts

With wolf's jaw

Ergonomic soft rubber hand grips Fixing of the sawblade by simple turning the blue clamping element in the hand grip Clamping piece adjustable by 40° Saw blade bimetal 407 A Captive dowel pins fix the saw blade The combination of lightweight aluminium bra

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel