Miscellaneous - Adata, AutoCell Electronics, MM Spray, Romagna Plastic, Sensor (909)

ERSADUR soldering tip for i-CON TRACE soldering station

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

Magnetic adapter, 4 mm, red

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

Zener diode Housing: DO-204AL

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

SRBZ Round brush with plaited wire

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red

magnetic adapter • Magnet diameter: 7 mm • Rated current: 12 A • Rated voltage: 33 V AC / 70 V DC • Color: red

90° HSS taper deburring countersink for M3 countersunk heads. 16.5 mm/M8 DIN 335 C HSS, with cylindrical shank and 3 blades, CBN deep-ground.

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

ERSADUR soldering tip for i-CON TRACE soldering station

Ring gear drill chuck, 10 mm clamping Industrial design. With 10 mm spigot for use in the 10 mm collet. Incl. chuck wrench.

Diamond cutting disc for stone with average diamond concentration by RHODIUS. High performance with short cutting times, good service life, high safety, normal cooling time and average diamond concentration. Dry and wet cut possible. Diameter: 230 mm Widt

New premium line of lockable PeakTech universal carrying cases safely stores your sensitive electronic equipment when travelling or during field work. To adapt this sturdy case universally to the respective equipment, each case is padded with a 1 cm-thick

Solid wood decking screw, H361 flat countersunk head, TX, milled ridges underneath head, collar, double thread Thread-Ø: 3,5 Length: 50 mm Contets: 200 pieces zinc plated yellow

Fibreglass fabrics are becoming increasingly popular due to their enormous versatility and countless possible applications. The advantages are high strength and resistance to chemicals and other environmental influences at a realistically low price. Due t

Enamelled copper wire Loosely wrapped Diameter: 0.7 mm Length: 12 m

10.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

CV wood drill bit, 12 mm Area of use: Softwood, hardwood, plywood, chipboard. Working length: 30 mm - 105 mm

Isolated line laser, red, 20°, 650 nm, 3 VDC, 12x32 mm, class 1. This type is a line laser for the projection of a laser line. The laser has a very compact design. The power consumption is very low, therefore 2 batteries can easily be used for power suppl

WELLER replacement tip XTD, 4.6 mm, chisel-shaped

REISSER R2 — flat countersunk head, TZD star drive, TX Hardened steel, yellow zinc plated, sliding surface, RN 9251 TG, partial thread Thread: 4,5 mm Length: 60 mm Contents: 200 pieces TZD: 15

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

WELLER replacement tip XTC, 3.2 mm, chisel-shaped

Isolated line laser module, red, 20°, 650 nm, 4 mW, 5 V DC 8x26 mm, class 2

Replacement soldering tip for LR20/21, FE50 soldering iron/station. • 3.2 mm (Use in the more recent LR21 piston with 2-piece tip only in conjunction with WELLER SLEEVE possible)

ERSADUR soldering tip for Minityp S. • Pencil tip • 0.3 mm

ERSADUR soldering tip for i-CON TRACE soldering station

Spiral tube for compressed air For flexible cable applications Number of tubes: 1 Material: Polyurethane Colour: Black Working length: Max. 2 m

Reisser R2 — flat countersunk head, PZD Phillips, Pozidriv Hardened steel, blue zinc plated, sliding surface, RN 9200 VG, full thread Thread: 3.5 mm Length: 40 mm Content: 200

Strong magnetic ring to secure screws. Screwdriver bit can be recessed into the holder to create a contact surface for the screw head. Ideal for hard-to-reach places. For manual operation, electric screwdriver and drills. Drive: Hexagon, solid 6.3 (1/