Miscellaneous - Adata, Clear-Lite, Gedore, MM Spray (1,937)

ERSADUR soldering tip for i-CON TRACE soldering station

With technical and economical benefits due to the variable clamping reach and automatic grip of the legs Especially suited to removing V-belt pulley wheels and flywheels mounted on longer shafts Upgradeable with hydraulic spindle (see table) Upgradeable w

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

2 Port Panel Mount USB 3.0 Cable - USB A to Motherboard Header Cable F/F Extend a USB 3.0 Motherboard Header into Two Panel-mount USB 3.0-A Ports Compliant with USB 3.0 specifications 2 panel-mount USB 3.0-A ports with screws to allow for secure installa

Use: Controlled screw tightening from 40 to 200 Nm Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features: A

The HDMI 2.0b cable from Good Connections® guarantees a consistently high signal transmission up to 4K / UHD at 60Hz, as well as data rates up to 18 Gbit/s. Technical data: HDMI 2.0b support, backward compatible with older versions Supports 4K / UHD at a

Magnetic adapter, 4 mm, red

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

This docking station by Delock enables an external connection of up to two 2.5'' or 3.5'' SATA HDDs or SSDs through the USB interface. This solution does not require an external enclosure since the drive can be plugged into the docking station directly.

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

DNS® plus wood screw, flat countersunk head, 3.5 x 50 mm, full thread, SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-free screw

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

Ultra-sharp titanium-coated blades deliver outstanding performance, year after year Non stick coating ensures blades stay clean, even when cutting adhesive materials High-quality stainless steel, made in Germany, with exceptional durability User-friendly

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Dust collector for masonry and concrete drills Prevents contamination of the room For plugging onto masonry drills For drill bits with a diameter of 4 - 10 mm

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

Reduced expense due to versatile use as an engineer’s and recoilless hammer Universal use for service and assembly work With all advantages of a recoilless hammer with higher impact Less energy necessary, easier working With exchangeable splinter-proof, s

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Comfortable rotary trimmers for professional use Sturdy metal table with non-slip rubber feet for high stability Handy format lines with mm divisions along the cutting edge of the panel simplify alignment of the workpiece Double guide rod for an absolut

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

RJ45 network plug to USB 3.0 plug as adapter cable with CAT6 FTP internet cable in textile sheath with a length of 1.5 m for a direct connection The Goobay CAT6 Ethernet cable is equipped with 1x USB-A 3.0 plug to 1x RJ45 network plug. This allows you to

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

RJ45 network plug to USB 3.0 plug as adapter cable with CAT6 FTP internet cable in textile sheath with a length of 15 m for a direct connection The Goobay CAT6 Ethernet cable is equipped with 1x USB-A 3.0 plug to 1x RJ45 network plug. This allows you to e

SRBZ Round brush with plaited wire

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm

R2 plus chipboard screw, pan head, 4.0 x 20 mm, full thread, TX 15, steel, galvanised, blue passivated, EN 14592: 2008+A1: 2012, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction, timber c

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red

magnetic adapter • Magnet diameter: 7 mm • Rated current: 12 A • Rated voltage: 33 V AC / 70 V DC • Color: red

Stannol desoldering wick NC-BB desoldering wick 0.8 mm x 1.5 m halogen-free Highly effective copper desoldering wick No subsequent cleaning required Coated with halogen-free flux-powder Fast desoldering ESD-safe spools (1.5-m spools only) Heat-resistant c

Active USB 3.1 (Gen.1) Extension Cable - black - 10.00m The active SuperSpeed USB 3.1 (Gen. 1) USB-A Extension Cable is an indispensable accessory for PC and Mac users to bring USB peripherals such as hard drives, printers, mice, keyboards, and USB hubs w

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

90° HSS taper deburring countersink for M3 countersunk heads. 16.5 mm/M8 DIN 335 C HSS, with cylindrical shank and 3 blades, CBN deep-ground.

DNS® plus wood screw, flat countersunk head, 4.5 x 45 mm, partial thread (L1), SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-fr

RT Pico high-performance active soldering tip for the smallest microcomponents: 0402 to 01005 RT Pico soldering tips for WXPP/WXPP MS soldering irons Powerful active soldering tip for the smallest microcomponents: 0402 to 01005 Short distance between tip

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

Sockets hex 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 mm Spark plug socket 16 21 mm Lever change ratchet, fine-toothed, 72 teeth Extension 75 150 mm T-handle Universal joint Adaptor 3/8'' - 1/4'' Dimensions: L 300 x W 180 x D 52 mm Universal joint

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel