Miscellaneous - Adata, Combinatul Fondului Plastic, Einhell, Intenso, MM Spray, Neo Tools, Printer Maniak (2,072)

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 12.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

The HDMI 2.0b cable from Good Connections® guarantees a consistently high signal transmission up to 4K / UHD at 60Hz, as well as data rates up to 18 Gbit/s. Technical data: HDMI 2.0b support, backward compatible with older versions Supports 4K / UHD at a

Made with durable and tear-resistant film to protect loose documents. With practical punched gripping recess. No more paper chaos: DURABLE transparent wallets help to protect and store loose documents in an orderly manner. Transparent plastic wallet with

1/2'' socket wrench set, 20 pieces Description 6-edge FlankTraction profile Satin matt finish Chrome vanadium In a sturdy plastic case Features Packaging: plastic case, extra sturdy Shape: knurled Square drive in inches: 1/2'' Material 1: finest ch

ERSADUR soldering tip for i-CON TRACE soldering station

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

2 Port Panel Mount USB 3.0 Cable - USB A to Motherboard Header Cable F/F Extend a USB 3.0 Motherboard Header into Two Panel-mount USB 3.0-A Ports Compliant with USB 3.0 specifications 2 panel-mount USB 3.0-A ports with screws to allow for secure installa

Magnetic adapter, 4 mm, red

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

This docking station by Delock enables an external connection of up to two 2.5'' or 3.5'' SATA HDDs or SSDs through the USB interface. This solution does not require an external enclosure since the drive can be plugged into the docking station directly.

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

DNS® plus wood screw, flat countersunk head, 3.5 x 50 mm, full thread, SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-free screw

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

Ultra-sharp titanium-coated blades deliver outstanding performance, year after year Non stick coating ensures blades stay clean, even when cutting adhesive materials High-quality stainless steel, made in Germany, with exceptional durability User-friendly

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

Dust collector for masonry and concrete drills Prevents contamination of the room For plugging onto masonry drills For drill bits with a diameter of 4 - 10 mm

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

1/2'' SlimPOWER reversible ratchet, 72 teeth Description According to DIN 3122/ISO 3315 Square drive according to DIN 3120/ISO 1174 with ball lock Switchable Extremely robust thanks to double-pin technology Extremely slim head Finely toothed 72-tooth

Comfortable rotary trimmers for professional use Sturdy metal table with non-slip rubber feet for high stability Handy format lines with mm divisions along the cutting edge of the panel simplify alignment of the workpiece Double guide rod for an absolut

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

RJ45 network plug to USB 3.0 plug as adapter cable with CAT6 FTP internet cable in textile sheath with a length of 1.5 m for a direct connection The Goobay CAT6 Ethernet cable is equipped with 1x USB-A 3.0 plug to 1x RJ45 network plug. This allows you to

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

RJ45 network plug to USB 3.0 plug as adapter cable with CAT6 FTP internet cable in textile sheath with a length of 15 m for a direct connection The Goobay CAT6 Ethernet cable is equipped with 1x USB-A 3.0 plug to 1x RJ45 network plug. This allows you to e

SRBZ Round brush with plaited wire

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm

R2 plus chipboard screw, pan head, 4.0 x 20 mm, full thread, TX 15, steel, galvanised, blue passivated, EN 14592: 2008+A1: 2012, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction, timber c

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red

magnetic adapter • Magnet diameter: 7 mm • Rated current: 12 A • Rated voltage: 33 V AC / 70 V DC • Color: red

Stannol desoldering wick NC-BB desoldering wick 0.8 mm x 1.5 m halogen-free Highly effective copper desoldering wick No subsequent cleaning required Coated with halogen-free flux-powder Fast desoldering ESD-safe spools (1.5-m spools only) Heat-resistant c

Active USB 3.1 (Gen.1) Extension Cable - black - 10.00m The active SuperSpeed USB 3.1 (Gen. 1) USB-A Extension Cable is an indispensable accessory for PC and Mac users to bring USB peripherals such as hard drives, printers, mice, keyboards, and USB hubs w

Anti-static ESD earthing wrist strap set ADJUSTABLE SIZE: comfortable hand strap, simply adjust to the required size SAFETY: stiff press stud for maximum safety of the connection to the solder mat. No quick, accidental removal or breaking off possible F

Made with durable and tear-resistant film to protect loose documents. With practical punched gripping recess. No more paper chaos: DURABLE transparent wallets help to protect and store loose documents in an orderly manner. Transparent plastic wallet with

90° HSS taper deburring countersink for M3 countersunk heads. 16.5 mm/M8 DIN 335 C HSS, with cylindrical shank and 3 blades, CBN deep-ground.

DNS® plus wood screw, flat countersunk head, 4.5 x 45 mm, partial thread (L1), SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-fr

RT Pico high-performance active soldering tip for the smallest microcomponents: 0402 to 01005 RT Pico soldering tips for WXPP/WXPP MS soldering irons Powerful active soldering tip for the smallest microcomponents: 0402 to 01005 Short distance between tip

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

Printing device: Smart Printer (thermal transfer printer) Suitable for WMB Inline WAGO (2009-115, -114, -113), 1x grinding device

Product description With non-slip profile on the platform With checker plate on the step No tilt due to angled feet Double-sided access With a large platform for a good stability With safety interlocks Aluminium rails and steps Foldable for space-saving s