Miscellaneous - Adata, DLU Lighting, Einhell, Knipex, MS-Tech, Romagna Plastic (771)

LED E27 Fila XXL V150x190 230V 550Lm 6W 925 AC Matt White Dim

This USB 2.0 cable connects iPhone, iPad or iPod with Lightning Connector to your computer's USB port for syncing and charging. Or connect it to the Apple USB Power Adapter (AC Adapter) to charge from a power outlet.

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-C socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

Knipex cable knife with ergonomically designed safety handle, interchangeable blade with special cut. With hinged blade guard, integrated in handle, captive. VDE-insulated according to DIN EN 60900 up to 1000 V. Length: 185 mm

Active USB 3.2 Gen 1 extension cable - for data rates of up to 5Gbit/s over a distance of 10 m! - Active USB 3.0 / USB 3.2 Gen 1 extension cable - With Type C plug and Type A socket - For hubs, USB sticks, external hard drives, printers or other devices

LED GU10 DTW MR16 50x58 230V 250Lm 5.5W 820-828 40° AC White/Nickel Di

LED P28s tube T29x119 10-30V 1100Lm 9.5W 865 8-30 VAC/DC IP65

LED E27 Fila XXL TS125x173 230V 550Lm 6W 925 AC Matt White Dim

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

With the Sandberg sync and charging cable, you can synchronise with your computer and charge the batteries directly from there or from a charging device with a USB port.

Connection cable, axial connector - axial coupling (IEC), highly shielded, class A • Surge impedance 75 ohm• For radio and TV • Type in line with KDG 1 TS 152 (EN 60966-2-5) - Length 10.0 m

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

Cable knife, VDE-tested 1000 V. Insulated blade backs, with protective cap. Length 180 mm

tool chrome plated, handles with dipped insulation, VDE-tested IEC 60900DIN EN 60900

Cable knife with protective cap. VDE-tested 1000 V. Non-insulated blade backs. Length: 180 mm

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Single-handed crimping lever pliers from KNIPEX For wire end ferrules from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with exce

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

tool burnished, handles with multi-component grips

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Positioning tweezers for holding, inserting, and pulling: With dimensionally adapted shapes, the gripping surfaces are ideally suited for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore b

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

E10 T9x23 mm, 220 - 240 V, wire-ended, 10,000 hours, clear red neon glass

LED E27 Vintage Tube T30x185 230V 100Lm 2.5W 820 AC Clear Dim

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.0 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Knipex crimping die For KN 97 43. For turned contacts, HTS + Harting.

LED E27 Tube T35x149 230V 1600Lm 15W 830 AC/DC Opal Dim

USB-C port for data and power Charge your USB-C device from a USB-A source. Supports power and data signals.

LED E27 Vintage Rustika ST64x145 230V 140Lm 3.5W 820 AC Clear Dim

KNIPEX cable shears with double blade Cuts smoothly and cleanly without crushing. For single and multi-strand copper and aluminium cable. Not suitable for steel wire and hard-drawn copper conductors. KNIPEX cable shears with double blade facilitates cutti

LED E27 Vintage GLS A60x110 230V 65Lm 2.5W 818 AC Gold Dim

90 31 03 BK KNIPEX TubiX® XL Pipe cutter Spring-loaded QuickLock mechanism holds the tool on the pipe once locked in place. Precise and quick: exact positioning of the cutting wheel on the pipe. High-quality needle-bearings enable the cutting wheel and fo

LED Ba22d Ball G45x80 12-60V 250Lm 3W 830 160° DC Opal Non-Dim

4-in-1 charging at 100 W The Verbatim 100 W GaN charger combines multiple chargers in a single device: two USB-C PD 100 W connections, a USB-C PD 65 W connection and a USB-A QC 3.0 (EU/UK/US) connection, all in a slim, palm-sized design. This charger is i

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5 - 6 mm².

LED GU5.3 MR16 Glass 50x47.5 12V 5W 38° AC/DC Yellow Non-Dim

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

Self-adjusting crimping pliers with side entry for DIN-compliant crimping of wire end ferrules in a profile from 0.08 - 10 mm². Square crimping always ensures optimal contact surfaces. Easy handling, force strengthening, self-releasing lock.