Miscellaneous - Adata, Edding, Einhell, Knipex, Romagna Plastic (522)

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

Electronics side cutters for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length: 115 mm, round Head shape, without bevel Cutting force: Soft wire from 0.3 to 1.3 mm diam

For burr-free cutting of plastic piping (e.g. plastic reinforced pipes) with a diameter of 6 - 35 mm Not suitable for cable cutting Blades can be replaced and can be retrieved from any position Little force is required thanks to special cutting geometr

Knipex coated-wire stripping tweezers for removing paint insulation on copper wiring with diameter of approximately 0.6 mm. With interchangeable knives, spring steel, plastic grips. Length: 120 mm

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.0 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

Knipex crimping die For KN 97 43. For D-Sub connector 0.08 - 0.56

pliers chrome plated, handles with multi-component grips

Active USB 3.2 Gen 1 extension cable - for data rates of up to 5Gbit/s over a distance of 5 m! - Active USB 3.0 / USB 3.2 Gen 1 extension cable - With type C plug and type A socket - For hubs, USB sticks, external hard drives, printers or other devices w

Flipchart marker with chisel tip Specifically designed to write on flipchart paper. Ink does not bleed through on to the following pages. • Odourless, water-soluble ink • Refillable • Stroke width: approx. 4.0 - 12.0 mm • Colour: Green Cap-off time: up to

3-in-1 charging at 65 W The Verbatim 65 W GaN charger combines a USB-C PD 65 W connection and a USB-A QC 3.0 connection in a slim, palm-sized design. This charger is ideal for powering your laptops, tablets, smartphones, game consoles etc. at the office,

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

chrome plated, handles with multi-component grips

pliers burnished, handles with multi-component grips, with 3 interchangeable crimping dies

pliers chrome plated, handles with multi-component grips

KNIPEX power combination pliers, VDE-tested For heavy-duty applications with 35% less force required thanks to new, improved lever ratios. The optimally positioned joint allows easier cutting, as well as powerful gripping, bending and pulling. Inductively

For stripping thin copper conductors 0.3 - 1.0 mm² (AWG 23-18) Precise stripping due to tool's stepwise adjustment to the conductor diameter • With wire stripper • With length stop: adjustable from 4.0 to 15.0 mm • With safety catch • Housing: plastic, im

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 1 mm • Replaceable tip • Refillable •

pliers chrome plated, handles with multi-component grips, with integrated tether attachment point for a tool tether

non-insulated terminals + cable connectors

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Knipex crimping system pliers WITHOUT crimping dies In service case with fitting tool. With interchangeable crimping dies Universal application for almost all crimping connections. -Optional positioning aids available -Parallel crimping -Reduced manual fo

With electrically conductive coating: Universal ESD tweezers balance and control potential differences between their user and the components. They meet the requirements of the electronics and precision mechanics industry and protect sensitive components.

KNIPEX side cutters, 140 mm From vanadium electric steel for hard and soft wire with inductively hardened precision blades, cutting edge hardness approx. 62 HRC, polished head. Length: 140 mm For wire diameter 4.0 mm (soft)/1.8 mm (hard) New 2-component h

USB-C port for data and power Charge your USB-C device from a USB-A source. Supports power and data signals.

liers black lacquered, handles with multi-component grips insulated terminals + cable connectors 0,75 - 6,0 / 18 - 10

Suitable for 95 05 20 SB electrician's scissors, ideal for CutiX universal knives or similar slim tools such as installation pliers, TwinGrip etc., made of durable polyester fabric

Optimally suited for design fittings and other highly sensitive materials thanks to soft, smooth gripping surfaces. Allows use on chrome if the jaws of the pliers wrench have been damaged by improper or too rough use.

• high contrast • improved viewing angle • Controller ST7066U-0A-B • Interface parallel • Technology STN

pliers black atramentized, head polished, handles plastic coated

KNIPEX BiX® Clever pipe cutter: Cuts pipes without shavings and fits comfortably in the hand. Can cut high-temperature plastic drain pipes and electrical conduits in next to no time. Can be used to cut sealing sleeves during final assembly – close to the

KNIPEX cable shears with double blade Cuts smoothly and cleanly without crushing. For single and multi-strand copper and aluminium cable. Not suitable for steel wire and hard-drawn copper conductors. KNIPEX cable shears with double blade facilitates cutti

KNIPEX flat nose pliers 160 mm, VDE g-tested • Flat, short, wide jaws • Serrated gripping surfaces • Chrome vanadium electric steel, forged, oil-hardened Length: 160 mm

Side cutters for universal use, with inductively hardened precision blades, chrome-plated head, normal bevel, length 140 mm. Plastic sleeves VDE-insulated, 1000 V, IEC 900 Cutting force: Soft wire up to 4.0 mm in diameter, hard wire up to 1.8 mm in diamet

Chalk marker for writing and drawing on dark boards, windows, glass and mirrors. Bright or fluorescent colours, opaque and odourless water-based liquid chalk, wipes off virtually all non-porous surfaces with a damp cloth. Shake, remove the cap and pump.

non-insulated open plug type connectors (plug width 2.8 + 4.8 mm)

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: Green Cap-off time: up to a few days.

The fineliner is ideal for writing and preparing drawings, scripts, sketches, fashion illustrations and effective layouts. Water-based ink in attractive colours. Fineliner with metal-framed plastic nib, water-based ink. Stroke width: 0,3 mm

KNIPEX electronics side cutters, round head, with bevel, ESD Design electrically dissipative. For use on electrostatically sensitive components. Smooth, low-friction movement owing to precision-ground, play-free screwed joint. Polished in glare-free finis