Miscellaneous - Adata, Edding, Knipex, Romagna Plastic, Sensor (518)

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 140 mm Head chrome-plated. Stripping values: 0.1 to 0.8 mm diameter

Insulated precision tweezers for work on live equipment up to 1000 V AC. With narrow tips and 45° curved shape. Nickel-plated, VDE-tested, length 150 mm.

Electrician's gloves according to DIN-EN 60903. Protection when touching live parts. Size 9. VDE-tested 1000 V.

For Bowden cables and soft wire ropes (including V2A) up to diameter of 3.0 mm Light, clean cut thanks to special cutting edge shape Sickle-shaped cutting edges enclose the cut material and prevent splicing of the wire rope Little force needed owing to

With replaceable blade

KNIPEX side cutters for universal use, with inductively hardened precision blades, polished head, standard bevel. Length: 160 mm. Plastic sleeves IEC 900 Cutting force: Soft wire up to 3.0 mm in diameter, hard wire up to 1.5 mm in diameter.

• high contrast • improved viewing angle • Interface parallel • Controller ST7066U-0A • Technology STN

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

Optimally suited for design fittings and other highly sensitive materials thanks to soft, smooth gripping surfaces. Allows use on chrome if the jaws of the pliers wrench have been damaged by improper or too rough use.

BASIC-S--HDMI extension-HDMI plug (A) to HDMI coupling (A), gold platedoldet, ULTRA HD, 3D, HEAC, 1,0m

Combination pliers, lightweight, with cutting edges for hard and soft wire, long cutting edges for thicker cable. Blades additionally inductively hardened. Length: 180 mm Head chrome-plated, handles VDE-insulated, 1000 V. Cutting force: Soft wire up to 3.

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

Replacement blade with guide shoe for stripping knife 16 50 145 SB

Industry painter with extremely durable and highly opaque colour paste Ideally suited for labelling rough surfaces, dirty materials and rusty metals. • Fade-resistant, smudge-resistant and waterproof once dry • Also marks on clean surfaces underwater • Ti

90 23 01 E01 Spare blade for 90 23 01

OHP marker with corrosion-resistant, metal-framed bullet tip For very clear, vivid writing on an overhead projector, also for labelling glass and plastics. • Permanent, waterproof ink • Stroke width: approx. 0.3 mm • Colour: Green

pliers black atramentized, head polished, handles with multi-component grips

Crimping pliers for wire end ferrules For crimping wire end ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm² Crimping in marked half-round dies for reliable connections between the sleeve and the conductor 9 particularly deep dies with coni

Industrial permanent marker Ideally suited for marking slightly oily and dusty surfaces. • Bullet tip • For industrial use Colour: blue Stroke width: approx. 1.5 - 3 mm Filled with smudge-resistant and waterproof ink that is also resistant to etching solu

Permanent marker with bullet tip Smudge and water-resistant, low-odour, quick-drying ink For labelling, painting as well as marking virtually any materials, including metal, glass and plastic. • Stroke width: approx. 0.75 mm • Replaceable tip • Refillable

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.5 - 3.0 mm • Colour: blue Cap-off time: up to a few days. T

Board marker with bullet tip For writing on whiteboards. Dry-wipeable from virtually any sealed surfaces such as enamel, glass and melamine. • Low-odour ink • Refillable • Stroke width: approx. 1.0 mm • Colour: black Cap-off time: up to a few days. The ca

1 x replacement cutter for KN 12 42 195

Knipex stripping side cutter. Indispensable pliers for cutting and stripping for electrical installation. Head chrome-plated, inductively hardened Precision cutting edges for soft wire Up to 4 mm in diameter. Stripping holes 1.5 and 2.5 mm². Grip casings

• USB 3.0 • A plug > A socket • SUPER-SPEED • Colour: Black • Length: 1.8m This cable is used to extend the USB 3.0 interface. USB 3.0 is the latest USB standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). Th

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

pliers black atramentized, head polished, handles with multi-component grips

Nickel-plated pliers Shape 0: jaws for round material, with wire strippers Hold round, shaped and flat material securely High load capacity With adjusting screw and release lever One hand operation High clamping pressure owing to knee lever ratio Pliers b

Cable cutter insulated with multi-component casings, VDE-tested 250 mm For cutting copper and aluminium cables, single and multi-wire. Not suitable for steel wire and wire cable. Hardened precision-ground blades. Cuts smoothly and cleanly without crush

IEC 60900 DIN EN 60900 ASTM F1505 • Full insulation reduces the risk of short circuit • For counter fitting and counter lock • Plastic, glass-fibre reinforced • Handles with soft plastic zone for a secure hold With the high-quality and robust plastic p

KNIPEX Alligator water pump pliers, 300 mm Box joint, high stability provided by double guide. Self-locking on pipes and nuts, no slipping on the work piece. Chrome vanadium electrical steel, oil hardened and tempered, teeth hardness approx. 61 HRC. Lengt

ESD plastic tweezers set Included in delivery: 1 x 92 09 02 ESD KNIPEX plastic tweezers 1 x 92 09 03 ESD KNIPEX plastic tweezers 1 x 92 09 01 ESD KNIPEX plastic tweezers 1 x 92 09 04 ESD KNIPEX plastic tweezers 1 x 92 09 05 ESD KNIPEX plastic tweezers

Electronics side cutters, ESD protected In this pliers design, electrostatic energy is dissipated through the handles slowly and in a controlled manner. This protects devices susceptible to electrostatic discharge in accordance with applicable standards,

KNIPEX power combination pliers 200 mm For heavy-duty applications with 35% less force required thanks to new, improved lever ratios. The optimally positioned joint allows easier cutting, as well as powerful gripping, bending and pulling. Inductively hard

Precision circlip pliers for internal circlips (holes) For fitting circlips in holes in the 8 - 13 mm dia. range High load capacity in continuous operation, up to 10-fold higher service life Precise, effortless screwed joint Forged Large contact surfaces

With electrically conductive coating: Universal ESD tweezers balance and control potential differences between their user and the components. They meet the requirements of the electronics and precision mechanics industry and protect sensitive components.

• USB 3.0 • A plug > A socket • SUPER-SPEED • Colour: Black • Length: 5.0m This cable is used to extend the USB 3.0 interface. USB 3.0 is the latest USB standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). Th

Connect this USB 3.1 multiport adapter to a USB-C device. This way you can connect up to three different USB devices through a single port. 1x USB-C™ 3.1 Adapter Cable

Knipex crimping lever pliers for modular jack For cutting and stripping flat telephone cable and crimping 4, 6 and 8-pin modular plugs, RJ11/RJ12/RJ45. Precise crimping action owing to parallel crimping and lock, energy-saving lever mechanism with length