Miscellaneous - Adata, Einhell, Knipex, PowerPlus, Romagna Plastic, Sensor (282)

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

pliers black atramentized, head polished, handles with multi-component grips

Nickel-plated pliers Shape 0: jaws for round material, with wire strippers Hold round, shaped and flat material securely High load capacity With adjusting screw and release lever One hand operation High clamping pressure owing to knee lever ratio Pliers b

Cable cutter insulated with multi-component casings, VDE-tested 250 mm For cutting copper and aluminium cables, single and multi-wire. Not suitable for steel wire and wire cable. Hardened precision-ground blades. Cuts smoothly and cleanly without crush

IEC 60900 DIN EN 60900 ASTM F1505 • Full insulation reduces the risk of short circuit • For counter fitting and counter lock • Plastic, glass-fibre reinforced • Handles with soft plastic zone for a secure hold With the high-quality and robust plastic p

KNIPEX Alligator water pump pliers, 300 mm Box joint, high stability provided by double guide. Self-locking on pipes and nuts, no slipping on the work piece. Chrome vanadium electrical steel, oil hardened and tempered, teeth hardness approx. 61 HRC. Lengt

Electronics side cutters, ESD protected In this pliers design, electrostatic energy is dissipated through the handles slowly and in a controlled manner. This protects devices susceptible to electrostatic discharge in accordance with applicable standards,

• USB 3.0 • A plug > A socket • SUPER-SPEED • Colour: Black • Length: 5.0m This cable is used to extend the USB 3.0 interface. USB 3.0 is the latest USB standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). Th

Connect this USB 3.1 multiport adapter to a USB-C device. This way you can connect up to three different USB devices through a single port. 1x USB-C™ 3.1 Adapter Cable

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

pliers grey atramentized, head polished, handles with slim multi-component grips

Roll-up bag with 4 compartments made of durable polyester fabric. With practical, adjustable quick release fastener. Dimensions, opened (L x H): 315 x 275 mm.

Adjustment by pushing a button directly on the workpiece. Fine adjustment: for optimum adaptation to different workpiece sizes and hand-friendly handle positions. Self-locking on pipes and nuts: no slipping on the work piece, energy-saving work. Gripping

for SMD-technology* angled tips smooth gripping surfaces

• high contrast • improved viewing angle • Controller ST7066U • Interface parallel • Technology STN

Multi-function key for actuation of closures in the areas of building technology (heating and sanitary facilities, air-conditioning and ventilation equipment, electrical engineering), gas and water supply and shut-off systems. • 8-beam version: 2x 4-way w

Adjustment by pushing a button directly on the workpiece. Fine adjustment: for optimum adaptation to different workpiece sizes and hand-friendly handle positions. Self-locking on pipes and nuts: no slipping on the work piece, energy-saving work. Gripping

Spring steel, high-strength

pliers grey atramentized, head polished, handles with multi-component grips, with integrated tether attachment point for a tool tether

USB 3.0 SuperSpeed+ cable SuperSpeed data transmissions up to 5 Gbit/s – 10 times faster than USB 2.0 For super-fast syncing and charging at up to 4.5 W Type C plug can be used on both sides Backward compatibility with USB 2.0 and 1.1

End angle cutting pliers For precision work on electronic parts. Box joint, play-free box precision joint, low-friction double spring, mirror-finish surface. Length 120 mm, short head, angled 35°, small bevel. Cutting force: Up to 0.6 mm in diameter.

Premium chisels with self-sharpening effect offer the longest service lifes for the maximum efficiency in terms of results - durable and powerful.

Combination/cable shears for copper and aluminium cable, with sharp, precision-ground blades, adjustable screwed joint. Length 140 mm Cutting force: Copper up to 10 mm in diameter Aluminium up to 24 mm in diameter

Sturdy construction made of ABS material, black All-round double aluminium frame Detent torque hinges that function as cover holders Robust, ergonomic carrying handle Two lockable clamp locks A removable tool panel in the lid with 15 tool slots on th

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

Solar plug connector, MC 4 (multi-contact) Capacity 4.0 - 10.0 mm2 AWG: 11 - 7 3 nests

End cutting nippers for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. • Length: 115 mm • Small bevel • Mini-cutter Cutting force: soft wire up to 0.8 mm in diameter.

pliers grey atramentized, handles with non-slip plastic coating

The indispensable cutting tool for multi-faceted use. High-quality material and precision processing for high durability. Precision cutting edges additionally inductively hardened, (cutting edge hardness approx. 62 HRC) for soft and hard wire. Clean cu

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 115 mm, pointed-round jaws.

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

head polished, handles with multi-component grips

Cable jacket knife, VDE-tested up to 1000 V. Insulated blade backs, with protective cap and sliding shoe on blade tip, as a result, there is no damage to the inner conductor insulation. Length: 180 mm

For stripping UTP and STP data cables 4.5 to 10.0 mm in diameter Stripping device for cross-sections of 0.2/0.3/0.8/1.5/2.5/4 mm² Two-level, hinged stripping tool With opening spring and locking pawl Mounting clip for secure storage Housing: Plastic,

For Knipex Crimp System Pliers For heat shrinkeable sleeve connectors.

Mini pliers wrench, pliers and wrench 86 03 150 KNIPEX Cobra®, high-tech water pump pliers 87 01 125 Tool bag made from durable polyester fabric, with rip-tape fastener and belt loop Dimensions (W x H x D): 70 x 170 x 50 mm

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

• high contrast • improved viewing angle • Controller ST7066U-0A-B • Interface parallel • Technology STN

Assortment box with insulated ferrules: 0.50 - 2.50 mm² 500x 0.50 mm² 500x 0.75 mm² 400x 1.00 mm² 300x 1.50 mm² 200x 2.50 mm² length: 5.8 mm

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic