Miscellaneous - Adata, Einhell, Mini-Box, MM Spray, Romagna Plastic (967)

This cable holder by Delock enables a clear and orderly sorting of exposed cables. It is self-adhesive and can be easily attached to any smooth surface, such as a desk or wall. With its small round design, the cable holder fits inconspicuously into any ro

This Delock mini Displayport cable can be used to connect a further VGA device, such as a monitor, to your MacBook, MacBook Pro or MacBook Air. Technical data • Connector: mini Displayport 20-pin plug > VGA 15-pin plug • VGA port with screws • Mini Disp

BASIC-S--MINI display port cable 1.2, plug-plug, UHD 4K2K, black, 2m

ERSADUR soldering tip for i-CON TRACE soldering station

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

Magnetic adapter, 4 mm, red

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

High speed mini HDMI cable with Ethernet channel - 2.00 m Because of their high reliability, the high speed mini PI1200 HDMI cables in the PureInstall series are particularly well-suited for professional applications and installations. Ideal for connectin

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

SRBZ Round brush with plaited wire

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red

magnetic adapter • Magnet diameter: 7 mm • Rated current: 12 A • Rated voltage: 33 V AC / 70 V DC • Color: red

90° HSS taper deburring countersink for M3 countersunk heads. 16.5 mm/M8 DIN 335 C HSS, with cylindrical shank and 3 blades, CBN deep-ground.

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

Buccaneer mini USB series • Protection class IP68, dust and waterproof according to EN 60529 • USB 2.0, data rates up to 480 Mbs • Plug and Play, standard 4-pin interface • Shielded system • Coated cable • Screw connection, a secure and proven locking sys

ERSADUR soldering tip for i-CON TRACE soldering station

Ring gear drill chuck, 10 mm clamping Industrial design. With 10 mm spigot for use in the 10 mm collet. Incl. chuck wrench.

Diamond cutting disc for stone with average diamond concentration by RHODIUS. High performance with short cutting times, good service life, high safety, normal cooling time and average diamond concentration. Dry and wet cut possible. Diameter: 230 mm Widt

New premium line of lockable PeakTech universal carrying cases safely stores your sensitive electronic equipment when travelling or during field work. To adapt this sturdy case universally to the respective equipment, each case is padded with a 1 cm-thick

Solid wood decking screw, H361 flat countersunk head, TX, milled ridges underneath head, collar, double thread Thread-Ø: 3,5 Length: 50 mm Contets: 200 pieces zinc plated yellow

Delock USB mini plug, angled > USB 2.0 A socket, OTG 50 cm cable This Delock USB mini cable can convert the USB mini port of your mobile device into a USB-A socket. You can then connect, for instance, HDDs or memory sticks with standard USB connections to

Fibreglass fabrics are becoming increasingly popular due to their enormous versatility and countless possible applications. The advantages are high strength and resistance to chemicals and other environmental influences at a realistically low price. Due t

Enamelled copper wire Loosely wrapped Diameter: 0.7 mm Length: 12 m

10.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

CV wood drill bit, 12 mm Area of use: Softwood, hardwood, plywood, chipboard. Working length: 30 mm - 105 mm

Isolated line laser, red, 20°, 650 nm, 3 VDC, 12x32 mm, class 1. This type is a line laser for the projection of a laser line. The laser has a very compact design. The power consumption is very low, therefore 2 batteries can easily be used for power suppl

WELLER replacement tip XTD, 4.6 mm, chisel-shaped

Mini Power LED converter Compact design for 1 watt Power LEDs. The converter offers protection against overtemperature, short circuits and open circuits on the secondary side. LEDs: 1 - 3 pcs (11 - 15 V), 1 - 6 pcs (22 - 28 V) Primary: 11 - 15 V, 22 - 28

REISSER R2 — flat countersunk head, TZD star drive, TX Hardened steel, yellow zinc plated, sliding surface, RN 9251 TG, partial thread Thread: 4,5 mm Length: 60 mm Contents: 200 pieces TZD: 15

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

WELLER replacement tip XTC, 3.2 mm, chisel-shaped

Isolated line laser module, red, 20°, 650 nm, 4 mW, 5 V DC 8x26 mm, class 2