Miscellaneous - Adata, Gedore, Intel, Knipex, Romagna Plastic (484)

Knipex crimping die For KN 97 43. For turned contacts, HTS + Harting.

With technical and economical benefits due to the variable clamping reach and automatic grip of the legs Especially suited to removing V-belt pulley wheels and flywheels mounted on longer shafts Upgradeable with hydraulic spindle (see table) Upgradeable w

Knipex electronics pliers assortment In synthetic leather case. 7-piece tool kit for working on electronic components. Contents: 3x electronics gripping pliers 115 mm (3512115, 3522115, 3532115) 2x electronics side cutters 115 mm (7702115, 7742115) 1x ang

pliers chrome plated, handles with multi-component grips

pliers chrome plated, handles with multi-component grips

Electronic side cutters, Super-Knips. Play-free joint, extremely effortless motion, precision-milled. cutting edges without grinding, with opening spring and limiter. Length 125 mm, narrow head, without bevel Cutting force: soft wire from 0.2 to 1.0 mm in

Wiring pliers for gripping, bending and stripping insulation from wires from 0.5 - 0.75/1.5 and 2.5 mm² as well as for crimping wire end ferrules 0.75/1.5/2.5mm².

Strong drop forged design Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required By reversing the legs, this tool can be used as an internal or ext

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 145 mm, Flat-round, long jaws.

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Head chrome-plated, handles VDE-insulated 1000 V. Stripping values: 0.5 to 5 mm diameter

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

head mirror polished, handles with multi-component grips, Oblique End Cutter, short head Style 5: Oblique End Cutter, short head, without bevel, for flush cutting, a = 27°

tool burnished, handles with multi-component grips

With replaceable blades for four or six different conductor cross-sections Conductor is not damaged thanks to precisely ground shaped blade, even fine-stranded wire are gently stripped Clamping jaws hold the wire firmly while stripping With adjustable

ESD positioning tweezers hold, insert and pull: With dimensionally adapted shapes, the gripping surfaces are ideal for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore be inserted and move

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Saw blade 404 A-406 A Saw blade No. 404 A-406 A Bimetal saw blade No. 407 A

pliers grey atramentized, head polished, handles with slim multi-component grips

BASIC-S--HDMI extension-HDMI plug (A) to HDMI coupling (A), gold platedoldet, ULTRA HD, 3D, HEAC, 0,25m

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

For Knipex Crimp System Pliers For non-insulated tubular cable lugs and crimp terminals in accordance with DIN 46237 and non-insulated butt and crimp connectors in accordance with DIN 46341.

Positioning tweezers for holding, inserting, and pulling: With dimensionally adapted shapes, the gripping surfaces are ideally suited for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore b

pliers grey atramentized, head polished, handles with slim multi-component grips

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

Electronics side cutters for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length: 115 mm, round Head shape, without bevel Cutting force: Soft wire from 0.3 to 1.3 mm diam

For burr-free cutting of plastic piping (e.g. plastic reinforced pipes) with a diameter of 6 - 35 mm Not suitable for cable cutting Blades can be replaced and can be retrieved from any position Little force is required thanks to special cutting geometr

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Knipex coated-wire stripping tweezers for removing paint insulation on copper wiring with diameter of approximately 0.6 mm. With interchangeable knives, spring steel, plastic grips. Length: 120 mm

Carefully hardened and tempered along the full length Striking heads inductively tempered Working edge polished and clear varnished In PVC holder Long pattern 175 mm Long pattern: 175 mm

Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and wood handle into one unit ROTBAND-PLUS handle jo

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.0 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

Knipex crimping die For KN 97 43. For D-Sub connector 0.08 - 0.56

pliers chrome plated, handles with multi-component grips

Alligator® Set