Miscellaneous - Adata, Intel, Knipex, PowerPlus, Romagna Plastic (461)

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

KNIPEX plastic side cutters Side cutters with surface-ground cutting surfaces without bevel, for smooth truncating of sprues on plastic parts or soft materials such as lead. Vanadium electric steel, oil-hardened and tempered. Polished head, plastic-coated

Active, optical USB 3.0 / USB 3.2 Gen 1 extension cable - with data transfer rates of up to 5GBit/s at a distance of up to 15m! - Active USB extension over 15 metres - Low cable cross-section thanks to fibre optics - Solid metal connector housing - The e

Tube cutter produced from tough, glass-fibre-reinforced plastic 185 mm For cutting thin-walled plastic tubes (e.g. plastic armoured flexible tubing) and hoses, including fabric-reinforced tubing, made of plastic and rubber up to 25 mm outer diameter. Not

Knipex latest-generation crimping lever pliers with reduced manual force by up to 30% compared to commercially available crimping pliers owing to innovative lever transmission, two-handed operation for easy crimping of large conductor cross-sections. Adju

With the high-quality USB 4.0 Gen. 3x2 angle adapter from Good Connections®, you can not only charge your USB-C™ devices with up to 240 watts in the shortest possible time, but also transfer data effortlessly and at impressive speeds of up to 40 Gbps. It

KNIPEX precision electronics gripping pliers, flat-round Smooth, low-friction movement owing to precision-ground, play-free screwed joint. Polished in glare-free finish with ergonomic 2-component grip casings and smooth opening spring. The shape, choice o

Pantograph pliers produced from oil-hardened vanadium steel. Long, flat-round jaws with serrated gripping surfaces with straight shape. Blades additionally inductively hardened for medium-hard and hard wire. Cutting edge hardness: approx. 59 HRC For soft

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

Side cutters for universal use, with inductively hardened precision blades, chrome-plated head, normal bevel, length 180 mm. Plastic sleeves VDE-insulated, 1000 V, IEC 900 Cutting force: Soft wire up to 4.0 mm in diameter, hard wire up to 2.0 mm in diamet

HDMI adapter for installation in patchpanel suitable only for keystone panels( 37576.1, 37578.1, 37580.1..)

Knipex positioning aid for KN 97 49 05.

Rubber cover cloth for protection when working on live parts. VDE-tested 1000 V. Size: 500 mm x 500 mm.

Precision pliers for delicate assembly tasks, e.g. in electronics and precision mechanics. For gripping, holding and bending. Box precision joint. Smooth, ground gripping surfaces. Edges carefully deburred. Low-friction double spring for gentle and smo

Assortment box with insulated ferrules: 4.0 - 16.0 mm² 50x 4.0 mm² in grey 20x 6.0 mm² in yellow 20x 10.0 mm² in red 10x 16.0 mm² in blue

Knipex crimping die For KN 97 43. For western plugs 4/6/8 pin.

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-C socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

90 10 165 BK KNIPEX CutiX Innovative and variably extendable stabilisation bar: versatile, precise, and faster cutting. Exert targeted pressure on the back of the blade without risk of injury, no unintentional bending or breaking of the blade. Robust, dur

Single-handed crimping lever pliers from KNIPEX For insulated cable shoes from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with

Connection cable, axial connector - axial coupling (IEC), highly shielded, class A • Surge impedance 75 ohm• For radio and TV • Type in line with KDG 1 TS 152 (EN 60966-2-5) - Length 10.0 m

Solvent-free two-component adhesive on epoxy resin basis for particularly fast adhesion on small surfaces. The processing time is up to 2 minutes, and hand-tightness is achieved after 5 minutes. The final strength is approx. 800 N/cm². The bonded joint ha

pliers black atramentized, head polished, handles with multi-component grips

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-A socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

micro USB spiral cable 1.0m, black Raspberry PI

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Precision cutting edges for soft and hard wire, as well as piano wire. Cuts components such as bolts, nails, rivets etc. up to 5.2 mm in diameter. Particularly high cutting performance with less effort owing to highly effective articulated design. Blades

ESD universal tweezers set Included in delivery: 1 x 92 28 70 ESD KNIPEX universal tweezers 1 x 92 28 71 ESD KNIPEX universal tweezers 1 x 92 28 69 ESD KNIPEX universal tweezers 1 x 92 38 75 ESD KNIPEX universal tweezers 1 x 92 58 74 ESD KNIPEX universal

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.8 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

straight pattern fine tip smooth gripping surfaces

pliers black lacquered, handles with multi-component grips non-insulated open plug-type connectors (plug width 6.3 mm)

Solvent-free two-component adhesive on epoxy resin basis for highest loads. The processing time is up to 90 minutes. Curing time and final strength are temperature-dependent. At room temperature, solid after 12 hours. The bonded joint is impact-resistant,

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 0.5 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

KNIPEX power side cutters 140 mm Produced from oil-hardened chrome-vanadium electric steel with forged pivot axis for the toughest stresses. Inductively hardened precision cutting edges are suitable for piano wire as well as for soft wire. New 2-component

KNIPEX combination pliers produced from special tool steel, oil-hardened, polished head. With 2-component handles for ergonomic working. Blades additionally inductively hardened. Cutting force: Soft wire up to 3.1 mm in diameter Hard wire up to 2.0 mm in

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of common cable connectors Included in delivery 97 90 21 (13) No. 97 52 36 KNIPEX PreciForce® 1 97 99 01 blade receptacles 25

Technical specification: - USB 3.0 / USB 3.1 (Gen. 1) adapter - Connections: USB 3.0 plug A to USB-C™ socket - Nickel-plated connections with gold-plated contacts - Super-speed, up to 5 Gbit/s data transfer rate - USB 3.0 standard, downward compatible wit