Miscellaneous - Adata, Knipex, M-Tech, PowerPlus, Romagna Plastic (459)

4-in-1 charging at 200 W The Verbatim 200 W GaN charger combines two USB-C PD 100 W connections, a USB-C PD 65 W connection and a USB-A QC 3.0 connection in a slim, palm-sized design. This charger is ideal for powering your laptops, tablets, smartphones,

ERSA Multi-TC Power soldering iron with sensor-controlled tip temperature The ERSA Multi-TC is a powerful, robust, temperature-controlled Power soldering iron with sensitive temperature sensor positioned directly under the internally heated soldering tip.

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-C socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

Single-handed crimping lever pliers from KNIPEX For insulated cable shoes from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with

Connection cable, axial connector - axial coupling (IEC), highly shielded, class A • Surge impedance 75 ohm• For radio and TV • Type in line with KDG 1 TS 152 (EN 60966-2-5) - Length 10.0 m

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades. Length 215 mm, nickel-plated.

Automatic stripping pliers: 0.14 - 6.0 mm² These innovative patented universal stripping pliers are suitable for precise, damage-free stripping and unsheathing of all electronic single and multi-conductor cabling, in particular also with PTFE insulation.

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Blue • Length: 3.0m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 devices s

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Black • Length: 1.8m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 devices

KNIPEX power combination pliers, VDE-tested For heavy-duty applications with 35% less force required thanks to new, improved lever ratios. The optimally positioned joint allows easier cutting, as well as powerful gripping, bending and pulling. Inductively

Snipe nose pliers with cutter 140 mm, straight Radio pliers produced from oil-hardened special tool steel in special quality. Flat-round jaws with serrated gripping surfaces. Blades additionally inductively hardened for soft and medium-hard wire. Cutting

Flexibility, visibility and quick access to tools, accessories and other parts with the Superclip system. It consists of a tool wall panel (steel perforated plate) and different versions of tool hooks. The clips can be mounted anywhere on the wall and mov

angled tips nickel plated

Additional bag for Modular X18 - 00 21 50 LE tool backpack

Knipex crimping die for KN 97 43 200. For crimping MNL BK1 and MNL SK1.

Spare cutting wheel for the tube cutter TubiX® made of high-quality ball-bearing steel.

Knipex latest-generation crimping lever pliers with reduced manual force by up to 30% compared to commercially available crimping pliers owing to innovative lever transmission, two-handed operation for easy crimping of large conductor cross-sections. Adju

round tips, approx. 2 mm wide straight pattern smooth gripping surfaces

Electronics side cutters 115 mm Pointed mini-head with small facet. For wire diameter 0.3 - 1.5 mm (soft)/0.5 mm (hard) Box joint, play-free precision joint, low-friction double spring. Mirror-finish surface, blades additionally inductively hardened. Cutt

KNIPEX power combination pliers 180 mm For heavy-duty applications with 35% less force required thanks to new, improved lever ratios. The optimally positioned joint allows easier cutting, as well as powerful gripping, bending and pulling. Inductively hard

Cable cutters with ratchet principle For copper and aluminium cable, one-handed operation, two-stage sprocket drive for easy cutting. Cuts smoothly and cleanly without crushing, also suitable for stripping. Can be used even in confined spaces. Not suitabl

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

R2 plus chipboard scr. Pan head, TX, partial thread, CE, 4.5 x 60, blue galvanised steel, 1x sliding, VE 200 MOUNTING RECOMMENDATIONS: Pre-drilling may be necessary depending on the condition of the wood and the mounting situation. AREAS OF APPLICATION: I

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

Advanced Analysis option for Rohde & Schwarz Power Analyzer HMC8015 (unregistered software license).

Knipex electronics pliers assortment In synthetic leather case. 7-piece tool kit for working on electronic components. Contents: 3x electronics gripping pliers 115 mm (3512115, 3522115, 3532115) 2x electronics side cutters 115 mm (7702115, 7742115) 1x ang

Single-handed crimping lever pliers from KNIPEX For wire end ferrules from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with exce

Automatic stripping pliers: 2.5 - 10.0 mm² These innovative patented universal stripping pliers are suitable for precise, damage-free stripping and unsheathing of all electronic single and multi-conductor cabling, in particular also with PTFE insulation.

KNIPEX side cutters for universal use, with inductively hardened precision blades, polished head, standard bevel. Length: 180 mm Plastic sleeves VDE-insulated 1000 V, IEC 900 Cutting force: Soft wire up to 2.5 mm in diameter, Hard wire up to 4.0 mm in dia

pliers chrome plated, handles with multi-component grips

The epoxy resin system Casting Resin Plus 90 is a sealing compound that is as clear as glass once hardened.

pliers chrome plated, handles with multi-component grips

Electronic side cutters, Super-Knips. Play-free joint, extremely effortless motion, precision-milled. cutting edges without grinding, with opening spring and limiter. Length 125 mm, narrow head, without bevel Cutting force: soft wire from 0.2 to 1.0 mm in

Wiring pliers for gripping, bending and stripping insulation from wires from 0.5 - 0.75/1.5 and 2.5 mm² as well as for crimping wire end ferrules 0.75/1.5/2.5mm².

Knipex mini-pliers wrench Pliers and wrench in one tool with parallel-guided gripping jaws, quick adjustment by pushing a button directly on the workpiece. Ideal for gripping, holding, pressing and bending workpieces. Infinitely variable gripping of all w

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 145 mm, Flat-round, long jaws.

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Head chrome-plated, handles VDE-insulated 1000 V. Stripping values: 0.5 to 5 mm diameter

head mirror polished, handles with multi-component grips, Oblique End Cutter, short head Style 5: Oblique End Cutter, short head, without bevel, for flush cutting, a = 27°

tool burnished, handles with multi-component grips