Miscellaneous - Adata, Knipex, M-Tech, Romagna Plastic (273)

Connection cable, axial connector - axial coupling (IEC), highly shielded, class A • Surge impedance 75 ohm• For radio and TV • Type in line with KDG 1 TS 152 (EN 60966-2-5) - Length 10.0 m

pliers black atramentized, head polished, handles with multi-component grips

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

micro USB spiral cable 1.0m, black Raspberry PI

Precision cutting edges for soft and hard wire, as well as piano wire. Cuts components such as bolts, nails, rivets etc. up to 5.2 mm in diameter. Particularly high cutting performance with less effort owing to highly effective articulated design. Blades

Adjustment by pushing a button directly on the workpiece. Fine adjustment: for optimum adaptation to different workpiece sizes and hand-friendly handle positions. Self-locking on pipes and nuts: no slipping on the work piece, energy-saving work. Gripping

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.8 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

straight pattern fine tip smooth gripping surfaces

pliers black lacquered, handles with multi-component grips non-insulated open plug-type connectors (plug width 6.3 mm)

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 0.5 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

In TANOS MINI-systainer® (robust plastic box) Two stackable plastic inserts with six trays each for connectors With an assortment of common cable connectors Included in delivery 97 90 21 (13) No. 97 52 36 KNIPEX PreciForce® 1 97 99 01 blade receptacles 25

Technical specification: - USB 3.0 / USB 3.1 (Gen. 1) adapter - Connections: USB 3.0 plug A to USB-C™ socket - Nickel-plated connections with gold-plated contacts - Super-speed, up to 5 Gbit/s data transfer rate - USB 3.0 standard, downward compatible wit

Cable cutter for cutting flat ribbon cabling up to 56 mm in width without crushing. Replaceable cutting support and stop angle for right-angled cutting. Replaceable standard blades. Length 215 mm, nickel-plated.

Lightweight design made from durable, reinforced polyester fabric Front wall also reinforced with aluminium brackets Front wall can be partly folded with adjustable loops and with an exterior document pocket With galvanised base pan With carry handle

• high contrast • improved viewing angle • Controller ST7066U • Interface parallel • Technology STN

Parabolic replacement blades for KNIPEX PreciStrip16 .

For Knipex Crimp System Pliers For non-insulated terminals + cable connectors.

Snipe nose pliers with cutter (radio pliers) With inductively hardened blades. Length: 160 mm Chrome-plated head, serrated gripping surfaces. Grip casings VDE-insulated 1000 V/IEC 900. Cutting force: approx. 60 HRC Soft wire up to 2.5 mm in diameter, Medi

pliers black atramentized, handles with slim multi-component grips, with recess for easier cutting of thicker wires Style 3: the recess in the blade allows easier cutting of thicker wires, e. g. for anchor bolts in false ceilings

X-Cut compact side cutters, high ratio • Box joint: maximum stability with low weight • Double-bearing pivot axle for hard, permanent stresses • High cutting performance with little effort due to optimal coordination of cutting angle and transmission ra

Wire end ferrule pliers for reliable crimping of wire end ferrules according to DIN 46628. 0.25 mm² to 2.50 mm²

Roll-up bag with 11 compartments made of durable polyester fabric. With practical, adjustable quick release fastener. Dimensions, opened (L x H): 450 x 290 mm.

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

BASIC-S--HDMI extension-HDMI plug (A) to HDMI coupling (A), gold platedoldet, ULTRA HD, 3D, HEAC, 5,0m

4 parts with VDE tools

Screwdriver Set

KNIPEX power side cutters 160 mm Produced from oil-hardened chrome-vanadium electric steel with forged pivot axis for the toughest stresses. Inductively hardened precision cutting edges are suitable for piano wire as well as for soft wire. New 2-component

For stripping all standard coaxial cables from 4.8 to 7.5 mm in diameter (such as for TV and satellite reception), also suitable for PVC-Flex 3 x 0.75 mm² With length scale from 5.0 to 20.0 mm Two-level, hinged stripping tool With opening spring and lo

HDMI adapter for installation in patchpanel suitable only for keystone panels( 37576.1, 37578.1, 37580.1..)

Identical to KN 35 12 115 yet with dissipative handle casings for electro- static protection.

pliers chrome plated, handles with multi-component grips

Fitted with common precision circlip pliers for the very highest requirements Attractive sales packaging with SB hole Robust plastic packaging, also suitable for continued storage of the pliers 8-piece

Assortment box with insulated ferrules: 0.5 - 2.5 mm² 50x 0.50 mm² in white 100x 0.75 mm² in grey 100x 1.00 mm² in red 100x 1.50 mm² in black 50x 2.50 mm² in blue

• USB 3.0 • A plug > A socket • SUPER-SPEED • Colour: Black • Length: 3.0m This cable is used to extend the USB 3.0 interface. USB 3.0 is the latest USB standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). Th

Sturdy construction made of ABS material, black All-round double aluminium frame Detent torque hinges that function as cover holders Robust, ergonomic carrying handle Two lockable clamp locks A removable tool panel in the lid with 15 tool slots on th

pliers chrome plated, handles with multi-component grips

pliers black atramentized, head polished, handles with multi-component grips

pliers black atramentized, head polished, handles plastic coated