Miscellaneous - Adata, MM Spray, MS-Tech, Romagna Plastic (312)

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

SRBZ Round brush with plaited wire

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red

magnetic adapter • Magnet diameter: 7 mm • Rated current: 12 A • Rated voltage: 33 V AC / 70 V DC • Color: red

New premium line of lockable PeakTech universal carrying cases safely stores your sensitive electronic equipment when travelling or during field work. To adapt this sturdy case universally to the respective equipment, each case is padded with a 1 cm-thick

Solid wood decking screw, H361 flat countersunk head, TX, milled ridges underneath head, collar, double thread Thread-Ø: 3,5 Length: 50 mm Contets: 200 pieces zinc plated yellow

Fibreglass fabrics are becoming increasingly popular due to their enormous versatility and countless possible applications. The advantages are high strength and resistance to chemicals and other environmental influences at a realistically low price. Due t

Isolated line laser, red, 20°, 650 nm, 3 VDC, 12x32 mm, class 1. This type is a line laser for the projection of a laser line. The laser has a very compact design. The power consumption is very low, therefore 2 batteries can easily be used for power suppl

REISSER R2 — flat countersunk head, TZD star drive, TX Hardened steel, yellow zinc plated, sliding surface, RN 9251 TG, partial thread Thread: 4,5 mm Length: 60 mm Contents: 200 pieces TZD: 15

Isolated line laser module, red, 20°, 650 nm, 4 mW, 5 V DC 8x26 mm, class 2

Replacement soldering tip for LR20/21, FE50 soldering iron/station. • 3.2 mm (Use in the more recent LR21 piston with 2-piece tip only in conjunction with WELLER SLEEVE possible)

Spiral tube for compressed air For flexible cable applications Number of tubes: 1 Material: Polyurethane Colour: Black Working length: Max. 2 m

BASIC-S--HDMI extension-HDMI plug (A) to HDMI coupling (A), gold platedoldet, ULTRA HD, 3D, HEAC, 0,25m

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

14-mm carbon trimmer potentiometer with plastic housing and degree of protection IP 5 (dust-proof). Feature: • Self-extinguishing plastic parts in accordance with UL 94 V-0. Applications: • Electronic devices: white goods, brown goods, small household app

RS480 High-performance roughing disc with ceramic abrasive grain. Thanks to its high binding hardness, the RS480 grinds with maximum machining, excellent material removal and boasts a long service life. This combination drastically reduces working hours w

Miniature socket, diameter 2 mm, insulated. Contact spring made of copper beryllium, gold-plated, with soldered connection. Suitable for installation in equipment chassis and control panels up to a maximum wall thickness of 5 mm. • Colour: red • Measureme

Assortment box, assortment case made of transparent, unbreakable polypropylene with clear cover and stable slide locks. • With 32 compartment partitions • Dimensions (W x D x H): 338 x 260 x 57 mm

Standard hot glue sticks

Lamellar flap grinding disc by RHODIUS. Excellent results on stainless steel and optimum results on steel. Fibre support, zirconium corundum Diameter: 125 mm Grain size: 80

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.0 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

Test socket for PCB mounting from the Hirschmann miniature laboratory range. Spacing 10 mm Support, contact: tin Mounting type: PCB Diameter, PCB board hole: 1.3 mm

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

WEICON Allround Sealing Spray is a sprayable plastic with a strong adhesion for the sealing of leaks. It has been developed especially for the sealing of the finest cracks and seams indoors and outdoors. It can be used for the sealing of many different th

Polypropylene tool case with low weight and high load capacity. Resistant to oils, acids and alkalis. Extremely flexible organisation through inserts in the tool holder. • With 7 inserts and partitions • Dimensions (W x D x H): 540 x 300 x 200 mm

ERSA i-Tip long-lasting soldering tip range with ERSADUR-LF coating for the soldering iron i-tool in the soldering station i-CON version 0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT .Technical data: Long-lasting tip design: straight. Tip coati

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Lines Laser, red, 45 °, 650 nm, 5 VDC, 12x32 mm, class 1, focus 200 mm. isolated line laser, red, 650 nm, 5 mW 5 V DC, 45 degree

For invisible connections. • 7-mm Cristal sticks • For neo1 and neo2 •150 mm x 7 mm • Clear craft glue for invisible bonds.

Replacement soldering tip for LR20/21, FE50 soldering iron/station. • 2.0 mm (Use in the more recent LR21 piston with 2-piece tip only in conjunction with WELLER SLEEVE possible)

• high contrast • improved viewing angle • Controller ST7066U-0A-B • Interface parallel • Technology STN

Suitable for rivets in accordance with DIN 660 Contents: • 1x 446 002 0, 2 mm • 1x 446 003 0, 3 mm • 1x 446 004 0, 4 mm • 1x 446 005 0, 5 mm • 1x 446 006 0, 6 mm

Lamellar flap grinding disc by RHODIUS. Excellent results on stainless steel and optimum results on steel. Fibre support, zirconium corundum Diameter: 115 mm Grain size: 80

Tip for micro tool. • Lead-free • Pencil tip • 0.2 mm

Soldering tip, conical shape, Ø 0.5 mm for WXP 65, WP 65

ERSADUR soldering tips • Pencil tip • 0.8 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-Pro

1.4-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

Ersadur long-life soldering tip for Multitip C-25. • 45° bevelled