Miscellaneous - Adata, MM Spray, Printer Maniak (1,749)

Jigsaw blade made of HSS steel With ground and corrugated toothing (pitch 1.06 mm). For cutting steel, non-ferrous metal, fibreglass, compression moulded material, laminate, Plexiglas and insulation material. For SS 230/E and STS 12/E.

Solderable breadboard for 16-pin socket Epoxy fibre-glass FR4 1.50 mm Single-sided 35 µm Cu Hot dip tin-plated Solder resist Adapter for 16-pin socket with a pitch of 7.62 mm Spacing: 2.54 mm Eight three-hole pads and 2 x 8 two-hole pads on each sid

RJ45 network plug to USB 3.0 plug as an extremely thin adapter cable with CAT6 UTP internet cable in a textile jacket with a length of 15.0 m for a direct connection in white The Goobay CAT6 Ethernet cable with a diameter of just 3 mm is equipped with 1x

The Raspberry Pi USB 3.0 Hub is a high quality branded accessory that complements Raspberry Pi products and third-party products when more USB ports are required. USB 3.0 support for fast data transfer Compatible with Raspberry Pi and third-party products

Lowers your costs: Bit quick and easy to find thanks to red marking - even in dark environments by using an UV light. Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan. Increases your efficiency: Th

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 1.00 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 3 pieces

Active USB 3.2 Gen 1 extension cable - for data rates of up to 5Gbit/s over a distance of 5 m! - Active USB 3.0 / USB 3.2 Gen 1 extension cable - With type C plug and type A socket - For hubs, USB sticks, external hard drives, printers or other devices w

Test socket for PCB mounting from the Hirschmann miniature laboratory range. Spacing 10 mm Support, contact: tin Mounting type: PCB Diameter, PCB board hole: 1.3 mm

CV wood drill bit, 7.00 mm Area of use: Softwood, hardwood, plywood, chipboard. Working length: 68 mm Total length: 160 mm

Dispenser needle, conical with 0.84-mm opening.

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 4.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 2 pieces

R2 plus chipboard screw, pan head, 5.0 x 25 mm, full thread, TX 25, steel, galvanised, blue passivated, EN 14592: 2008+A1: 2012, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction, timber c

3-in-1 charging at 65 W The Verbatim 65 W GaN charger combines a USB-C PD 65 W connection and a USB-A QC 3.0 connection in a slim, palm-sized design. This charger is ideal for powering your laptops, tablets, smartphones, game consoles etc. at the office,

SDS-plus chisel Forged from one piece: Stable and resharpenable, long service life. With SDS-plus shank. Working length: flat 40 mm Total length: 250 mm

ERSADUR soldering tip for i-CON TRACE soldering station

Cable bundle markers for use with cable ties Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 500 per roll, 1 length Label surface: 25 x 11 mm Method of attachment: with cable ties Printing device: Wago s

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 2.00 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 3 pieces

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Lightning to USB-A Supersoft textile cable - Robust, elegant and MFi-certified The Lightning to USB-A textile cable (0.5 m) in white is the perfect companion for anyone looking for a high-quality yet durable charging cable for their Apple iPhone and iPa

The Kristall 611 solder wire is based on a halogen-activated ''no-clean'' flux. It was developed for high demands in conventional soldering and for soldering SMDs in industrial production, as well as for repair and post-soldering. The wire flux Kristall 6

Lowers your costs: Bit quick and easy to find thanks to red marking - even in dark environments by using an UV light. Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan. Increases your efficiency: Th

1.5-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

CV wood drill bit, 3.00 mm Area of use: Softwood, hardwood, plywood, chipboard. Working length: 30 mm - 105 mm Total length: 60 mm - 160 mm

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

The new thermal transfer smart printer The new WAGO thermal transfer smart printer is here and offers a range of innovations: with a brand new design and a powerful Linux motherboard, the smart printer now offers improved performance that can handle any

Pack of five jigsaw blades for metal Bayonet (T) shank Ref. no. T118B Serrated length: 55 mm Tooth pitch: 2 mm Example application: sheet metals 2.5 - 6 mm

RJ45 network plug to USB 3.0 plug as adapter cable with CAT6 FTP internet cable in textile sheath with a length of 7.5 m for a direct connection The Goobay CAT6 Ethernet cable is equipped with 1x USB-A 3.0 plug to 1x RJ45 network plug. This allows you to

Polypropylene tool case with low weight and high load capacity. Resistant to oils, acids and alkalis. Extremely flexible organisation through inserts in the tool holder. • With 7 inserts and partitions • Dimensions (W x D x H): 540 x 300 x 200 mm

ERSA i-Tip long-lasting soldering tip range with ERSADUR-LF coating for the soldering iron i-tool in the soldering station i-CON version 0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT .Technical data: Long-lasting tip design: straight. Tip coati

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 20 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

LT H soldering tip Soldering tip pencil shape, loose Width A: 0,8 mm Thickness B: 0.4 mm Length L: 13.5 mm Matching solder family FE MPR WP WSP Replacement soldering tip for WSP 80 (WSD 81).

Pack of five sabre saw blades for wood/universal Universal shank, 1/2'' (1.27 cm) Ref. no. S1344D Serrated length: 280 mm Tooth pitch: 1.3 mm TPI: 6 Application example: wood, plastic

for EASY ARM 1 & EASY ARM 2 Suitable for: Highflex suction arms Omniflex suction arms Diameter in mm: 60 Design: anti-static

Replacement soldering tip for ATTEN ST2150D Ø 0,2 mm

Alligator clip, red/black, 4 mm connection, CAT II 1000 V

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Ceramic Master 3900 drill bit Drill bits for ceramics, tiling, hard-burned tiling, glass, acrylic glass and mirror glass. Precise drilling-in plus quick and and material-protecting propulsion. -Regular regrinding is required when working on hard materials

Replacement soldering tip pair for SMD soldering/desoldering tweezers PISTON TWZ 60 (tweezers). • Width: 3.0 mm

shiverpeaks®-BASIC-S--Keystone connector USB-A female 3.0, 5 Gbps With the USB-A Keystone Connector you can extend your USB-A cable or you can insert the Keystone into a rack panel, a wall box or a table insert. The dimensions of the Keystone modules all