Miscellaneous - Adata, MM Spray, Romagna Plastic, Sensor (808)

1.3-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

ERSADUR soldering tip for i-CON TRACE soldering station

Diamond cutting disc X-LOCK TURBO FINE CUT Soldered, segment height 7 mm, dry cut, for cutting natural and artificial stone, fine stone tools and ceramics, hole 22.2 mm Colour: green Disc: Ø 125 Thickness: x 1.3 mm

Assortment box, assortment case made of transparent, unbreakable polypropylene with clear cover and stable slide locks. • With 32 compartment partitions • Dimensions (W x D x H): 338 x 260 x 57 mm

9403 Textile box 8740 C HF 2, empty, 152 x 159 x 45 mm

Standard hot glue sticks

Lamellar flap grinding disc by RHODIUS. Excellent results on stainless steel and optimum results on steel. Fibre support, zirconium corundum Diameter: 125 mm Grain size: 80

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.0 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

Jigsaw blade made of HSS steel With ground and corrugated toothing (pitch 1.06 mm). For cutting steel, non-ferrous metal, fibreglass, compression moulded material, laminate, Plexiglas and insulation material. For SS 230/E and STS 12/E.

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 1.00 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 3 pieces

Active USB 3.2 Gen 1 extension cable - for data rates of up to 5Gbit/s over a distance of 5 m! - Active USB 3.0 / USB 3.2 Gen 1 extension cable - With type C plug and type A socket - For hubs, USB sticks, external hard drives, printers or other devices w

Test socket for PCB mounting from the Hirschmann miniature laboratory range. Spacing 10 mm Support, contact: tin Mounting type: PCB Diameter, PCB board hole: 1.3 mm

CV wood drill bit, 7.00 mm Area of use: Softwood, hardwood, plywood, chipboard. Working length: 68 mm Total length: 160 mm

Dispenser needle, conical with 0.84-mm opening.

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 4.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 2 pieces

3-in-1 charging at 65 W The Verbatim 65 W GaN charger combines a USB-C PD 65 W connection and a USB-A QC 3.0 connection in a slim, palm-sized design. This charger is ideal for powering your laptops, tablets, smartphones, game consoles etc. at the office,

ERSADUR soldering tip for i-CON TRACE soldering station

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 2.00 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 3 pieces

1.5-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

CV wood drill bit, 3.00 mm Area of use: Softwood, hardwood, plywood, chipboard. Working length: 30 mm - 105 mm Total length: 60 mm - 160 mm

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

WEICON Allround Sealing Spray is a sprayable plastic with a strong adhesion for the sealing of leaks. It has been developed especially for the sealing of the finest cracks and seams indoors and outdoors. It can be used for the sealing of many different th

Pack of five jigsaw blades for metal Bayonet (T) shank Ref. no. T118B Serrated length: 55 mm Tooth pitch: 2 mm Example application: sheet metals 2.5 - 6 mm

Polypropylene tool case with low weight and high load capacity. Resistant to oils, acids and alkalis. Extremely flexible organisation through inserts in the tool holder. • With 7 inserts and partitions • Dimensions (W x D x H): 540 x 300 x 200 mm

ERSA i-Tip long-lasting soldering tip range with ERSADUR-LF coating for the soldering iron i-tool in the soldering station i-CON version 0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT .Technical data: Long-lasting tip design: straight. Tip coati

Earth bonding point (EBP) 1 MOhm safety resistor per connection. 2 m earth conductor with 4 mm lug Tabletop and under-table mounting. 3 x 10 mm push-button

Tool compatibility: For use with the WXMPS MS smart soldering irons and the Wxsmart soldering station Perfect for all micro and standard applications for micro and standard component sizes: Smart, active, high-performance soldering tips for micro and stan

Alligator clip, red/black, 4 mm connection, CAT II 1000 V

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Ceramic Master 3900 drill bit Drill bits for ceramics, tiling, hard-burned tiling, glass, acrylic glass and mirror glass. Precise drilling-in plus quick and and material-protecting propulsion. -Regular regrinding is required when working on hard materials

Replacement soldering tip pair for SMD soldering/desoldering tweezers PISTON TWZ 60 (tweezers). • Width: 3.0 mm

4.80-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

ERSADUR soldering tip for i-CON TRACE soldering station

USB-C port for data and power Charge your USB-C device from a USB-A source. Supports power and data signals.

Lines Laser, red, 45 °, 650 nm, 5 VDC, 12x32 mm, class 1, focus 200 mm. isolated line laser, red, 650 nm, 5 mW 5 V DC, 45 degree

For invisible connections. • 7-mm Cristal sticks • For neo1 and neo2 •150 mm x 7 mm • Clear craft glue for invisible bonds.

Bionic Pro SDS-plus hammer drill bit Areas of application: Granite, concrete, masonry, hard-burned tiling, marble, clinker. Bionic Pro cutting edge with barbed tooth profile and side grinding zones for fast drilling progress. Twinmax spiral for optimum re

Flexibility, visibility and quick access to tools, accessories and other parts with the Superclip system. It consists of a tool wall panel (steel perforated plate) and different versions of tool hooks. The clips can be mounted anywhere on the wall and mov

Replacement soldering tip for LR20/21, FE50 soldering iron/station. • 2.0 mm (Use in the more recent LR21 piston with 2-piece tip only in conjunction with WELLER SLEEVE possible)