Miscellaneous - Adata, MM Spray, Romagna Plastic (1,701)

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Black • Length: 0.25 m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 device

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-C socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

0.8-mm carbide drill bits in ten-piece plastic box. Precisely manufactured drill bits with a high level of rotational accuracy and strength. Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.

Lowers your costs: Bit quick and easy to find thanks to yellow marking - even in dark environments by using an UV light. Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan. Increases your efficiency:

Centring drill for drill bits 68,80,68S,80S. Packaging: Self-service pouch. (supplied without mounting shank and crown)

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 4.2 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 2 pieces

This active optical cable (AOC) is the perfect solution for high-quality, near-loss-free transfer of large amounts of data over long distances. Thanks to the all-metal connector housings, the cable is highly resistant to electromagnetic interference (EMI)

Analogue moving coil meter for DC with spring-loaded pointer bearing. • Accuracy class 1.5 • 90° scale • IP52 protection for enclosure front

Stannol solder wire crystal 511 Flux filled no-clean solder wire with clear residues Stannol crystal solder wires can be used for repair work and eliminate the need for a further cleaning process. They are characterized by the following properties: • Clea

shiverpeaks®-BASIC-S--Cable entry aid, nylon, 3 mm, 30m Use the cable entry aid to pull your cabling through ductwork effortlessly. An eyelet is provided on the nylon pull wire to fasten the cable to, and a guide spring to make it easier to negotiate ang

Lowers your costs: Bit quick and easy to find thanks to red marking - even in dark environments by using an UV light. Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan. Increases your efficiency: Th

slim Micro USB connector molding Aluminum-mylar foil with braided shielding supports high-speed USB data transfer rates of up to 480 Mbps Charge and Sync your Micro USB-equipped Smartphone or Tablet The USBAUB50CMBK 0,5m Micro USB Cable is colored to sui

7.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt. Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics. Contents: 1 item per self-service pouch

50-cm USB to Lightning cable, MFi-certified spiral cable USB-A TO LIGHTNING CABLE: The spiral cable stretches from 30 cm to 50 cm, so it does not become knotted. It has a strong but soft flexible TPE sheath, so it shrinks slightly and can be stowed in the

provide full charging power to your Micro-USB mobile devices connect to your device even in hard to reach areas and tight spaces Charge your power-hungry mobile devices with this 24 AWG Micro-USB cable Different phones and tablets require specific amount

Hole saw for 19, 22, 29, 32, 38, 44, 51, 64, 76, 89, 102 and 127 mm Two adapter attachments for power drills 1 protective metal plate Max. drilling depth 25 mm Delivery incl. transport case

Designed for use with nail-embedded wood, chipboard, blockboard, particle board and laminated sheet. HSS bi-metal construction for increased durability. Extended working life on nail-embedded wood. Four blades for faster drilling. 6.35 hex shank for conve

Tool compatibility: For use with the WXMPS MS smart soldering irons and the Wxsmart soldering station Perfect for all micro and standard applications for micro and standard component sizes: Smart, active, high-performance soldering tips for micro and stan

This active optical cable (AOC) is the perfect solution for high-quality, near-loss-free transfer of large amounts of data over long distances. Thanks to the all-metal connector housings, the cable is highly resistant to electromagnetic interference (EMI)

Universal drill bit. 5/6/8/10 mm Areas of application: Masonry, tiling, (some) glass, marble, plastics, metal, non-ferrous metals, coated chipboard, lightweight materials. These drill bits are not intended for rotary percussion drilling, but may be used f

High-density, double shielding for interference-free signal transmission Fully shielded F connector moulded on both sides to protect against dust, dirt and mechanical loads Nickel-plated, matching contacts F connector > F connector (fully shielded) Tech

Solder wire, ''Ultra-Clear'' ISO core High wetting rate, spreads across all conventional electronic surfaces No flux spatter on the components, equipment or the operator's hands Crystal-clear flux residue to improve appearance Minimal emission of fumes an

The Kristall 611 solder wire is based on a halogen-activated ''no-clean'' flux. It was developed for high demands in conventional soldering and for soldering SMDs in industrial production, as well as for repair and post-soldering. The wire flux Kristall 6

2.0 mm desoldering braid, 1.5 m on coil

Tool compatibility: For use with the WXUPS MS smart soldering irons and the Wxsmart soldering station Perfect for all ultra soldering applications which require a lot of heat Thermal Core Technology delivers maximum power to the tip, 150 W provides maximu

Fine solder Made in Taiwan, significantly improved electrical conductivity by a composition with a silver content of 3.5%. NO-CLEAN solution with continuous flux cores. No cleaning of solder joints required soldering Agile and halogen-free, low smoke gene

DNS® plus wood screw, flat countersunk head, 3.5 x 35 mm, full thread, SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-free screw

R2 plus chipboard screw, pan head, 3.0 x 16 mm, full thread, TX 10, steel, galvanised, blue passivated, EN 14592: 2008+A1: 2012, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction, timber c

ERSADUR soldering tips • Chisel-shaped/extended • 2.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80

This DC female bulkhead by Delock can be installed or cabled in a housing or a device in order to supply it with power. Specification Connectors: 1 x DC 5.5 x 2.1 x 12.0 mm female 2 x solder connection Suitable for DC pin length: 9.5 mm / 12 mm Operatin

Desoldering litz made of copper for optimal extraction of solder. Width: approx. 2.5 mm Length: approx. 1.6 m

Flexible, heat-resistant work surface made of blue silicone for safe soldering, repairing and crafting with a ruler The flexible work mat allows you to safely solder, repair and tinker with items such as smartphones, watches, glasses, cameras or model-mak

20 HSS twist drills in line with DIN 338 - type N, right-hand, cylindrical, in robust box with lid in carton. 2 of each size. Ø 0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0/1.1/1.2 mm

Are you looking for a compact spirit level and do not want to compromise on quality? Then the Type 80 AS in the length 20 cm is the right spirit level for you. Slim and reinforced profile, two measuring surfaces, optimally readable quality vials and integ

Pack of five sabre saw blades for metal/universal Universal shank, 1/2'' (1.27 cm) Ref. no. S1122VF Serrated length: 225 mm Tooth pitch: 0.9 mm TPI: 10 - 14 Application examples: metal, wood with metal contaminants >2.5 mm

This active optical cable (AOC) is the perfect solution for high-quality, near-loss-free transfer of large amounts of data over long distances. Thanks to the all-metal connector housings, the cable is highly resistant to electromagnetic interference (EMI)

Laser welded, segment height 10 mm, dry cut, special disc for hard materials, no cool-down breaks required, extremely long life due to special segment, for hard to very hard materials such as washed concrete, masonry, roof tiles, concrete, reinforced conc

6-mm carbon trimmer potentiometer with plastic housing and degree of protection IP 5 (dust-proof). The substrate in our SMD potentiometer is highly temperature-resistant and suitable for reflow soldering. Feature: • Self-extinguishing plastic parts in acc

3 ft. (1 m) USB to USB-C Cable - M/M USB-A to USB-C™ Cable USB-IF Certified USB 3.1 (10Gbps) Provide high-quality connections with a USB-IF certified USB to USB-C cabl Transfer data faster with this USB 3.1 cable that supports 10Gbps data transfer speeds

PROXXON polishing felt disc, medium-hard, Ø 50 mm, is ideal for polishing metals (e.g. stainless steel, brass and copper).