Miscellaneous - Adata, Osram, Proxxon, Romagna Plastic, Sensor (248)

Elastic silicone polishers in bullet shape. For polishing and smoothing surfaces. For precious metals, non-ferrous metals, stainless steel, glass, porcelain, wood, rubber and plastic. Set of 5

SMD-LED • small package • reflow solderable • power: 65 mW

With fabric insert. 50 x 1 x 10 mm. For cutting steel, non-ferrous metal, plastic and wood. Diameter: 50 mm.

OSRAM 2er-Pack Filament-LED. based on a E14-Socket opal bulb light current 470 lm by only 4 W nominal capacity

High-quality steel brush for high removal rate. 2 pieces, brush shape

Ideal for grinding, deburring, scharpening, rust removal and roughing of steel and non-ferrous metal.

It turns the PD 230/E and PD 250/E lathes into a complete machining center. Incl. column (35x 400mm), mounting flange and fixing screws. Scope of delivery: Drilling and milling device WITHOUT lathe.

PointLED The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

CHIPLED 0603 The compact chip LED is used as a backlight in a wide variety of applications such as LCDs, dashboards, phones, fax machines, switches and icons, as well as for general use.

BASIC-S--HDMI extension-HDMI plug (A) to HDMI coupling (A), gold platedoldet, ULTRA HD, 3D, HEAC, 0,25m

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

Tool holder for cylindrical grinding on lathes Made of steel with 20 mm MICROMOT system fit. For precise clamping of IBS/E or LBS/E drill grinders in the steel holder of the lathe. Stem size 8 x 10 mm. Total length: 65 mm.

Made from HSS steel. DIN 333 (type A). 60°. Complete set of centre drills in sizes 2 mm, 2.5 mm and 3.15 mm.

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.0 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

For precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiselling and cutting. With drill chuck (clamping range 0.3 - 3.2 mm). Precision ball-bearing spindle made of ground steel that can be locked at the push of a button for

Active USB 3.2 Gen 1 extension cable - for data rates of up to 5Gbit/s over a distance of 5 m! - Active USB 3.0 / USB 3.2 Gen 1 extension cable - With type C plug and type A socket - For hubs, USB sticks, external hard drives, printers or other devices w

3-in-1 charging at 65 W The Verbatim 65 W GaN charger combines a USB-C PD 65 W connection and a USB-A QC 3.0 connection in a slim, palm-sized design. This charger is ideal for powering your laptops, tablets, smartphones, game consoles etc. at the office,

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

PROXXON super-fine grinding discs made of silicon carbide are ideal for the pre-grinding and finishing of fillers and paint and for removing paint drips and entrapped particles.

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

USB-C port for data and power Charge your USB-C device from a USB-A source. Supports power and data signals.

Diamond grinding pins ball 1mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter 2.35.

OSRAM Opto-electronics - FIREFLY LED SMD housing, diffused encapsulation, potting, light emitted to side

Brass brushes, 5 pieces, in a wheel shape and 1 shaft, suitable for machining brass, copper, semi-precious stones, plastic and wood, as well as for cleaning electronic components and circuit boards.

• high contrast • improved viewing angle • Controller ST7066U-0A-B • Interface parallel • Technology STN

Flap wheels made of standard corundum The flap wheels are elastic and adapt to the contours of the workpiece to be processed. For machining hard to reach places. Flap wheel diameter 20mm (Shaft diameter 3.0mm)

High-quality steel brush for high removal rate. 5 pieces, wheel shape and 1 shaft.

Series starters for fluorescent lamps 4 - 22 watts

The 11-mm orbital motion of the polishing disc enables hologram-free polishing of painted and bare surfaces without heat building up. Powerful, balanced DC special motor with stepless speed control (full-wave electronics). Smooth-running planetary gear in

THE 08202 SYH-LY LCD dot matrix modules - Dot matrix modules with 2 lines and 8 characters - high-contrast LCD-STN display - with LED backlighting - Character: black - Manufacturer: Display Elektronik - Connection to 4- or 8-bit data bus - Supply voltage:

This USB 2.0 cable connects iPhone, iPad or iPod with Lightning Connector to your computer's USB port for syncing and charging. Or connect it to the Apple USB Power Adapter (AC Adapter) to charge from a power outlet.

Electronically controlled temperature with short heating time. Extra-high battery capacity for long operating life. For convenient, mains-independent soldering. Electronically controlled temperature (470°C) with short heating time. Extra-high battery capa

• high contrast • improved viewing angle • Controller ST7066 • Interface parallel • Technology STN

Wolfram vanadium steel milling bits, for machining soft and hard wood, non-ferrous precious metals, as well as plastics and plaster.

Mini TOPLED The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

4-in-1 charging at 100 W The Verbatim 100 W GaN charger combines multiple chargers in a single device: two USB-C PD 100 W connections, a USB-C PD 65 W connection and a USB-A QC 3.0 (EU/UK/US) connection, all in a slim, palm-sized design. This charger is i

Mini TOPLED The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Black • Length: 0.25 m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 device

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-C socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

CHIPLED 0805 The compact chip LED is used as a backlight in a wide variety of applications such as LCDs, dashboards, phones, fax machines, switches and icons, as well as for general use.