Miscellaneous - Adata, PowerPlus, Proxxon, Romagna Plastic, Sensor (230)

With die-cast aluminium housing head and 75 mm-long, slim spindle neck (permanent 20 mm MICROMOT system fit). Therefore especially suitable for inner grinding operations and working in channels and holes. Special balanced, powerful, quiet and long-lasting

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

HDMI adapter for installation in patchpanel suitable only for keystone panels( 37576.1, 37578.1, 37580.1..)

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-C socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

Connection cable, axial connector - axial coupling (IEC), highly shielded, class A • Surge impedance 75 ohm• For radio and TV • Type in line with KDG 1 TS 152 (EN 60966-2-5) - Length 10.0 m

Solvent-free two-component adhesive on epoxy resin basis for particularly fast adhesion on small surfaces. The processing time is up to 2 minutes, and hand-tightness is achieved after 5 minutes. The final strength is approx. 800 N/cm². The bonded joint ha

Adjustable wrench RG 250 Hot-forged from CrV steel. Ergonomic handle made from extremely sturdy, carbon-fibre-reinforced plastic (with hole). Slim head with ground jaws and a jaw angle of 22.5°. Easy-to-read millimetre scale for defining width across flat

The Sonero active USB 3.0 extension cable has a USB-A connector and a USB-A socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

micro USB spiral cable 1.0m, black Raspberry PI

Corundum cutting discs, manufactured with a special binder. 5 discs, diameter 38mm 1 shaft

Corundum cutting discs, manufactured with a special binder. 10 discs, diameter 22mm

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 1.8 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

Solvent-free two-component adhesive on epoxy resin basis for highest loads. The processing time is up to 90 minutes. Curing time and final strength are temperature-dependent. At room temperature, solid after 12 hours. The bonded joint is impact-resistant,

• USB 3.0 • A plug B micro plug • SUPER-SPEED • Colour: Black • Length: 0.5 m This USB cable corresponds to the new USB 3.0 standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). It is used to connect new USB3.0 d

Technical specification: - USB 3.0 / USB 3.1 (Gen. 1) adapter - Connections: USB 3.0 plug A to USB-C™ socket - Nickel-plated connections with gold-plated contacts - Super-speed, up to 5 Gbit/s data transfer rate - USB 3.0 standard, downward compatible wit

• high contrast • improved viewing angle • Controller ST7066U • Interface parallel • Technology STN

USB-Konfektionsstecker, straight Suitable hood: USB HOOD A (not included in delivery)

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Blue • Length: 3.0m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 devices s

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Collet chuck device with ER 20 collet chucks: for extreme concentricity. 2 - 10 mm. For machining round parts with high precision. The collet chuck device is mounted in place of the lathe chuck. With 8 collets (2 - 2.5 -3 - 4 - 5 - 6 - 8 and 10 mm). Packe

3-jaw chuck for hand-held Micromot devices Clamping range: 0.5 - 3.2 mm Not for Proxxon Micromot GG12, IB/E, LB/E, Colt2, and MICROMOT 50 and 50/E

Power Sensor Support for FPH handheld spectrum analyzer (unregistred software license).

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

Selected Wolfram vanadium steel. Functional and robust design. Shank and milling part manufactured from a one-piece blank. Precise indentation and optimum concentricity with simultaneous elasticity. For machining soft and hard wood, non-ferrous and precio

13-piece tool set for model makers. 1 fine milling bit each in ball shape 2.3mm and cylinder shape 2.3mm, 1 white corundum grinding bit each in ball shape 5.0mm and cone shape 5.0mm. 1 micro drill each in size 1.0 and size 2.3mm. 5 cutting discs 22mm, 1 s

For drilling, milling, grinding, polishing, cleaning, carving and engraving. Maximum speed: 20,000/min 230V / 100W Class 2 protective insulation.

Active, optical USB 3.0 / USB 3.2 Gen 1 extension cable - with data transfer rates of up to 5GBit/s at a distance of up to 20m! - Active USB extension over 20 metres - Low cable cross-section thanks to fibre optics - Solid metal connector housing - The e

Cutting saw blades - spring steel assortment, 1 piece each. Sizes: 16, 19, 22mm Thickness 0.1mm

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Black • Length: 1.8m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 devices

PROXXON abrasive mop roller for WAS/E and WAS/A roller grinders. For cleaning, grinding and removal of flat surfaces. Grinding compartments made of normal corundum are elastic and adapt to the contours of the workpiece being machined. For finishing work i

HDMI adapter for installation in patchpanel suitable only for keystone panels( 37576.1, 37578.1, 37580.1..)

For super-precise circular cuts! Allows accurate production of cylinders and cut-off cones with high repeat accuracy. Solid aluminium construction (anodised). Stepless, tool-free height adjustment. Generous feed gear ratio (1: 3) for convenient cutting wi

• USB 3.0 • A plug > A socket • SUPER-SPEED • Colour: Black • Length: 3.0m This cable is used to extend the USB 3.0 interface. USB 3.0 is the latest USB standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). Th

Micro USB data cable with charging function for data exchange between PC and mobile phone on the USB port. Suitable for devices with micro USB connections: • Nokia: 2700 Classic, 3120 Classic, 3600 Slide, 3710, 5100 classic, 5130 XpressMusic, 5220, 5230,

With stepless speed preselection for 200 - 4000 rpm with high precision (accuracy 0.05 mm). With digital speed display. Sophisticated control via rotor-position and speed sensors guarantees high torque when using large cutters, even in the lower speed ran

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

For architecture model construction, designers, decorators, artists (including arts and crafts lessons), prototype building. And for classic modelling (rail, flight, ship). Stable body with a 390 x 280 mm work surface made of aluminium-cobond compound. Wi