Miscellaneous - Adata, Proxxon, Romagna Plastic (203)

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Blue • Length: 3.0m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 devices s

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Collet chuck device with ER 20 collet chucks: for extreme concentricity. 2 - 10 mm. For machining round parts with high precision. The collet chuck device is mounted in place of the lathe chuck. With 8 collets (2 - 2.5 -3 - 4 - 5 - 6 - 8 and 10 mm). Packe

3-jaw chuck for hand-held Micromot devices Clamping range: 0.5 - 3.2 mm Not for Proxxon Micromot GG12, IB/E, LB/E, Colt2, and MICROMOT 50 and 50/E

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

Selected Wolfram vanadium steel. Functional and robust design. Shank and milling part manufactured from a one-piece blank. Precise indentation and optimum concentricity with simultaneous elasticity. For machining soft and hard wood, non-ferrous and precio

13-piece tool set for model makers. 1 fine milling bit each in ball shape 2.3mm and cylinder shape 2.3mm, 1 white corundum grinding bit each in ball shape 5.0mm and cone shape 5.0mm. 1 micro drill each in size 1.0 and size 2.3mm. 5 cutting discs 22mm, 1 s

For drilling, milling, grinding, polishing, cleaning, carving and engraving. Maximum speed: 20,000/min 230V / 100W Class 2 protective insulation.

Active, optical USB 3.0 / USB 3.2 Gen 1 extension cable - with data transfer rates of up to 5GBit/s at a distance of up to 20m! - Active USB extension over 20 metres - Low cable cross-section thanks to fibre optics - Solid metal connector housing - The e

Cutting saw blades - spring steel assortment, 1 piece each. Sizes: 16, 19, 22mm Thickness 0.1mm

Rasp cutter with metal needles made of tungsten-carbide For woodworking: application tools with metal needles made of tungsten-carbide. Unbeatable for modelling, cleaning and smoothing wood and fibreglass. Not for metal! Extremely sharp and easy to operat

• USB 3.0 • A plug > B plug • SUPER-SPEED • Colour: Black • Length: 1.8m This USB cable corresponds to the new USB 3.0 standard and impresses with its much faster data transfer rate of up to 5Gbps (SuperSpeed). It is used to connect new USB3.0 devices

PROXXON abrasive mop roller for WAS/E and WAS/A roller grinders. For cleaning, grinding and removal of flat surfaces. Grinding compartments made of normal corundum are elastic and adapt to the contours of the workpiece being machined. For finishing work i

HDMI adapter for installation in patchpanel suitable only for keystone panels( 37576.1, 37578.1, 37580.1..)

For super-precise circular cuts! Allows accurate production of cylinders and cut-off cones with high repeat accuracy. Solid aluminium construction (anodised). Stepless, tool-free height adjustment. Generous feed gear ratio (1: 3) for convenient cutting wi

• USB 3.0 • A plug > A socket • SUPER-SPEED • Colour: Black • Length: 3.0m This cable is used to extend the USB 3.0 interface. USB 3.0 is the latest USB standard and is impressive with its much faster data transfer rate of up to 5 Gbps (SuperSpeed). Th

Micro USB data cable with charging function for data exchange between PC and mobile phone on the USB port. Suitable for devices with micro USB connections: • Nokia: 2700 Classic, 3120 Classic, 3600 Slide, 3710, 5100 classic, 5130 XpressMusic, 5220, 5230,

With stepless speed preselection for 200 - 4000 rpm with high precision (accuracy 0.05 mm). With digital speed display. Sophisticated control via rotor-position and speed sensors guarantees high torque when using large cutters, even in the lower speed ran

Buccaneer USB series • Protection class IP68, dust and waterproof sealing when mated • USB 2.0, up to 480 Mbps • Plug and Play, standard 4-pin interface • Visual display of the mating, reduces the risk of damage during mating • Shielded system, high inter

For architecture model construction, designers, decorators, artists (including arts and crafts lessons), prototype building. And for classic modelling (rail, flight, ship). Stable body with a 390 x 280 mm work surface made of aluminium-cobond compound. Wi

Clamping up to 5 mm. Used in place of the rotating centring tip. Feed is achieved by moving the entire tailstock.

• high contrast • improved viewing angle • Controller ST7066U-0A • Interface parallel • Technology STN

Drilling and milling unit Micromot 60/E for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing. Voltage supply: 12 V by Proxxon power supply unit 28704/28706 Idle speed: adjustable fro

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Drilling and milling unit Micromot 60 for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing. Voltage supply: 12 V Idle speed: 20,000 rpm Extremely easy to manage with a diameter of on

Micromot steel collets for all hand-held Micromot devices. 1 piece each for 1.0/1.5/2.0/2.4/3.0/3.2mm with clamping nut and collet holder.

Connect multiple devices to your PC or MacBook with this USB C 2.0 cable to experience the ultimate all-in-one connectivity solution. The cable supports OTG (On The Go) so you can connect your mobile device to a USB device without having to use a normal c

Corundum cutting discs, manufactured with a special binder. 50 discs, diameter 22mm

The Sonero active USB 3.0 extension cable has a USB-C connector and a USB-A socket. This means that an existing USB cable can be extended over longer distances with ease. With a data rate of up to 5 Gbps, this cable complies with the USB 3.0 standard. The

Flap wheels made of standard corundum The flap wheels are elastic and adapt to the contours of the workpiece to be processed. For machining hard to reach places. Flap wheel diameter 30mm (Shaft diameter 3.0mm)

For drilling, milling, grinding, polishing, cleaning, carving and engraving. The extremely slim housing (made from glass-fibre-reinforced polyamide) with a soft component in the grip area allows the device to be guided with two fingers (pen grip). With a

Diamond grinding pins, cylinder 1.8mm With a smooth diamond coating. Profile body and shaft made of rust-proof stainless steel. For grinding, engraving and chiselling steel (and chrome-cobalt alloys), glass, ceramics, porcelain and plastic. Shaft diameter

MICROMOT 60/EF with power supply unit and 43 industrial-grade tools With quick-release chuck. Convenient when working with different shaft diameters. Balanced DC motor. Quiet and extremely durable. Ground ball-bearing spindle. Electronic speed control fro

Connect mobile devices to your PC or MacBook with this USB C 3.0 cable to experience the ultimate all-in-one connectivity solution. Perfectly suitable for charging and high-speed data transfer. USB cable

The Good Connections® HDMI junction cable with ethernet guarantees a constant high-quality signal transfer up to 4096 x 2160 pixel ( 4K*2K ) thanks to the combination of a premium cable structure and 24-carat gold-plated copper plugs. Specifications: - HD

For cutting, roughing, grinding, fine sanding and shaping in wood. Balanced DC special motor, powerful, quiet and durable. Stable gear head made of die-cast aluminium. Main housing made of glass fibre reinforced POLYAMIDE. Complete with grinding wheel mad

- Highly flexible ultra high-speed HDMI® 2.1 cable with SmartFLEX technology - Resolutions up to 8K / UHD-2 at 60Hz and 4K / UHD at 240Hz - High quality cable construction, triple shielding and soft PVC cable jacket - Supports Display Stream Compression (

M 3 - 4 - 5 - 6 - 8 and 10. With clamping pin Ø 10 mm for mounting in the tailstock drill chuck of the lathe. When thread cutting, the holder is held by hand. Completely packed in a wooden case with sliding lid. Accessories for lathes

housing for USB-A plug, transparent

High-speed HDMI® cable with Ethernet 3.0 metre HDMI® A plug>HDMI® C plug Properties: </b