Miscellaneous - American Light, AutoCell Electronics, Einhell, Romagna Plastic, Sensor (97)

Thanks to their variable length in range A from 4,5 to 45 mm, these light guides may be used in many different ways. Horizontal arrangement with SMD SIDELEDs as well as vertical variations with SMD TOPLEDs or SMD CHIPLEDs may be inserted deep into the fro

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 2.54 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

LED, 5 mm, ultra-bright, colourless, clear, super-yellow

• Single light guide • Tight fit via squeeze tenons

Ultra-bright LED, 3 mm, red. Housing: colourless/clear Beam angle: 20°

The light guide has been designed for the use of type 0603 CHIPLEDs or smaller types in a grid spacing of 2.54 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The 4-way light guide element is mounted on the

Mini lamp with practical clip that can be attached anywhere to keep your hands free. The Energizer Clip Light has a compact and modern design in green. The diffuser lens provides uniform light for large-area illumination with a brightness of 30 lumens an

• Light guide for front panel mounting • Can be used both vertical and horizontal • With 0° or 45° inject face • IP68-proofed

With these light guides signalling can be transferred by SMD TOPLEDs or SMD CHIPLEDs from the printed circuit board to the front panel. Assembly is done simply by pressing them into the front panel bore hole. • Design: straight • Head shape: spherical •

With these light guides signalling can be transferred by SMD TOPLEDs or SMD CHIPLEDs from the printed circuit board to the front panel. Assembly is done simply by pressing them into the front panel bore hole. • Design: straight • Head shape: planar • L

With these light guides, signalling can be transferred by SMD TOPLEDs or SMD CHIPLEDs from the printed circuit board to the front panel. Assembly is done simply by pressing them into the front panel bore hole. • Design: straight • Length: 30 mm • Light

Panel Mount Indicator 8mm prominent (exterior) bezel 12 VAC/VDC yellow - sunlight visibility - IP67 - satin chrome bezel

LED E27 Fila GLS A60x106 230V 810Lm 7W 827 AC Clear Light Sensor

With these light guides, signalling can be transferred by LEDs from the printed circuit board to the front panel. For 5 mm LEDs • Design: straight • Length: 45 mm • Light guide ø: 5 mm The light guide is held in place on the printed board via two press

Panel Mount Indicator 16mm round lens 230VAC green - IP67 - black plastic bezel

• Wide viewing angle • Highly permeable polycarbonate plastic material • Fulfils the specifications as per UL 94V-0 • Serves as insulator between the front panel and circuit and hence ensures additional EMV protection • The photo-conductors are set up on

Panel Mount Indicator 8mm prominent (exterior) bezel 24 VAC/VDC green - sunlight visibility - IP67 - satin chrome bezel