Miscellaneous - American Light, AutoCell Electronics, Logitech, Romagna Plastic (58)

Zener diode Housing: DO-204AL

• Wide viewing angle • Highly permeable polycarbonate plastic material • Fulfils the specifications as per UL 94V-0 • Serves as insulator between the front panel and circuit and hence ensures additional EMV protection • The photo-conductors are set up on

The light guide has been designed for the use of type 0603 CHIPLEDs or smaller types in a grid spacing of 2.54 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The double light guide element is mounted on th

The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

Ultra-bright LED, 3 mm, orange. Housing: colourless/clear Beam angle: 20°

CHIPLED 0805 The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

Ultra-bright LED, 3 mm, green. Housing: colourless/clear Beam angle: 20°

• Single row light guide system • Equipped with pins that are pressed on the PCB

4Pi room spotlight as E14 JDD tubular light bulb with high light intensity and slim 30 mm tube diameter. Light colour: Warm tone. Optimal alternative to glow plugs thanks to almost full angle illumination. Particularly suitable for rotating lights.

• Light guide for front panel mounting • Can be used both vertical and horizontal • With 0° or 45° inject face • IP68-proofed

Ultra-bright LED, 3 mm, white. Housing: colourless/clear Beam angle: 20°

• Single-row fiber optic system ø 3 mm (parallel to circuit board) • Can be used as an FEL substitute in a 5.08 pitch • To be used with SMD LEDs • For mounting on the PCB via press-in lugs

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

This wired LED is reliable, robust and can be used in a wide range of applications.

Micro SIDELED The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 2.54 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

• Single-row fiber optic system ø 3 mm (parallel to circuit board) • Can be used as an FEL substitute in a 5.08 pitch • To be used with SMD LEDs • For mounting on the PCB via press-in lugs

• Single fiber optic line ø 3 (parallel to front panel) • Usage of fiber optic line in connection with SMD LEDs • Tight fit via squeeze tenons • Can be in series according to FEL

The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

• Single-row fiber optic system ø 3 mm • FEL replacement in 5.08 mm • Usage in connection with SMD LEDs • Tight fit via squeeze tenons

The light guide has been designed for the use of type 0603 CHIPLEDs or smaller types in a grid spacing of 2.54 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The 3-way light guide element is mounted on the

The compact chip LED backlight is used in a wide variety of applications such as LCDs, dashboards, phones, faxes, switches, symbols and other general purposes.

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

This wired LED is reliable, robust and can be used in a wide range of applications.

The light guide has been designed for the use of type 0805 CHIPLEDs or smaller types and can be strip-mounted in a grid spacing of 5.08 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensures the

The light guide has been designed for the use of type 0603 CHIPLEDs or smaller types in a grid spacing of 2.54 mm. The system features a screen to prevent irradiation, so that mixed colours can also be used. The double light guide element is mounted on th

Synergy21 infrared LED 4x1 Watt, indoor Diffuse and widespread coverage that prevents glare of the camera. LED spot: • Protection class: IP20 • Sockets: GU10 • Voltage: 230 volts • Power: 4 Watts • Number of LEDs: 4 x 1 Watt IR Leds • IR range: 850 nm • B

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

• Single-row light guide system • Tight fit via squeeze tenons

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

Ultra-bright LED, 3 mm, yellow. Housing: colourless/clear Beam angle: 20°

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 2.54 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu

• Single-row fiber optic system ø 3 mm • FEL replacement in 5.08 mm • Usage in connection with SMD LEDs • Tight fit via squeeze tenons

This wired LED is reliable, robust and can be used in a wide range of applications.

This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the prin

The housing for the light guide rods is held in place on the printed board via two press-in lugs. Furthermore, the housings are designed to accommodate Ø2 mm light guides, i.e. 1000 µm fibres with a black coating are used. The light guide is used in conju

• Single-row fiber optic system ø 3 mm (parallel to circuit board) • Can be used as an FEL substitute in a 5.08 pitch • To be used with SMD LEDs • For mounting on the PCB via press-in lugs

• Single-row light guide system • Tight fit via squeeze tenons

The housing for the light guide rod is held in place on the printed board via two press-in lugs. Furthermore, the housings are designed to accommodate Ø 2 mm and Ø 3 mm light guides, i.e. flexible 3000 µm PUR fibres, 2000 µm PMMA fibres and 1000 µm PMMA/P

This multiple light guide has been designed for the use of type 0603 CHIPLEDs or smaller types and can be mounted in a grid spacing of 5.08 mm. The component features a screen to prevent irradiation, so that mixed colours can also be used. The screen ensu