Miscellaneous - Asus, Gedore (232)

Blade nickel-plated, fully insulated blade conforming to DIN VDE 0680-6 4615 3 with metal clip and yellow cap No. 4615 3 with metal clip and yellow cap

In accordance with DIN 3113, ISO 3318 Ring offset to 15°, reversible for right and left hand operation 72 teeth Ratchet mechanism Return angle 5° Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In rugged plastic case

Adjustable, releasing and sturdy tubular torque wrench with integrated lever ratchet and with square drive for industry and the trades Classified according to DIN EN 6789: 2017 Type II Class A, calibrated to a maximum permissible deviation of +/- 3 % and

Practical service tool Stable, needle-like setting tip and thin cleaning rod Ideal for cleaning and adjusting windscreen washer nozzles and headlamp washer nozzles With retaining clip and protective cap Aluminum

For the fast and easy insertion and removal of studs, bolts, etc. With hexagon drive With hexagon drive

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and

Hardened and tempered steel to EN 10083 Varnished, face and ball ground Double-curved hickory handle 360° clamping force of the tapered collar fixes the hammer head

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

For one hand operation Automatic impact release by spring mechanism Impact power infinitely adjustable between 60 - 130 N With 2C hand protection for comfortable and safe working

Acc. to DIN 3113, Form A, ISO 3318, ISO 7738 Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel In holder

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

In handy sheet metal case In robust sheet metal case

With 2 reversible bending forms 3/16'' - 1/4'' Ø (4,75 - 6 mm Ø) and 8 - 10 mm Ø For soft copper pipes EN 1057, all non-ferrous metal pipes as well as thin-walled precision steel pipes and brake lines Bright nickel-plated, handles PVC coated Bright nickel

Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Use: Controlled screw tightening from 110 to 550 Nm Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features:

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

One tool that works like a spanner and pliers DIN ISO 5743 Can replace two complete open-ended spanner sets, metric and inch (0-42mm/0-1.5/8'') Careful assembly of bolt connections with delicate surfaces (e.g. chrome-plated fittings) Adjustable, universal

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive as per DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, d

Acc. to ISO 6787 Jaw set at 15° Polished head with lasered scale High torque 40-50 HRC Chrome-vanadium steel Chrome-plated

1/4'' bit holder with quick-grip system Made in Germany Made in Germany

File length 100 mm Total length 177 mm

Glare-free reading Tip for depth measurement (tire profiles) Robust design made of hard brass Graduation in millimeters 0-30 mm + 1/10 mm Nonius

With flat mouth

For hand-operated sockets and accessories with square drive as per DIN 3120, ISO 1174, with ball locking device GEDORE vanadium steel 31CrV3, polished, chrome-plated Vanadium steel 31CrV3, polished, chrome-plated

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

Use: Controlled screw tightening from 10 to 50 N · m Repetition-accurate and precision-like Audible Torque triggering can clearly be heard and felt Clockwise and anti-clockwise tightening from switching over the mushroom head/push-through square Features:

Most used sizes combined in a set Flat pattern UD profile High torque transfer In robust sheet metal case Dimensions: 320 x 210 x 55 mm

Cutting edge polished With three nail pullers With 3 nail pullers

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Heavy duty pattern Chrome-vanadium

For internal and external measurements, with polished tips, depth gauge and high-speed setting Graduated in mm and inches, vernier 1/20 and 1/128'' In leather wallet In leather wallet

For removing solder residues when de-soldering electronic components The white soldering tip consists of Teflon material The housing consists of aluminium (black) and PA6 polymer (blue)

Pliers and wrench in one tool Maximum capacity: 50mm or 1.7/8'' 17 setting positions Chrome-plated surface with rough dipped handles Length 250mm, weight 535g Only available in version TC DIN ISO 5743

Forged hammer head DIN 1041 With contoured ash (No. E 600 E) or hickory (No. E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve The sleeve, tapered collar, fixing plate and wood screw bond the hammer head and

Straight Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Chrome-vanadium steel

Blade from bit steel, matt chrome-plated Contents: Hexagon screwdriver 2.5 3 4 5 6 8 mm Matt chrome

Made from chrome-vanadium steel Striking end tempered Shaft copper, tip paint-coated in silver Vanadium Steel

Hammer head forget, black varnished, striking faces polished Striking surface inductively case-hardened for tough long-term work Acc. to DIN 6474 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking face Doub