Miscellaneous - AutoCell Electronics, Cloud B, Colors-it, MS-Tech, Romagna Plastic, Sensor (18)

HuiYuan Opto-Electronic LED 5 mm blinking diffused blue 800 mcd 470 nm 30°

Zener diode Housing: DO-204AL

The stepper motor controller uses the ULN2003 driver and is supplied with a 4-phase, 5-V stepper motor. The stepper motor controller also features four LEDs that indicate the output channel currently in use. Specifications • ULN2003 driver • Includes 5-V

With this set, the IPC 3U 30255, 3U 3416, 4U 4129-N, 4U 4410, 4U 4416, 4U 4420 and 4U 4424 enclosures can be upgraded with PWM-controllable fans. For this purpose, the enclosed cable is connected to the fan backplane and the PWM fan sockets of the motherb

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

The MotoPi board is an expansion board for controlling and using up to 16 PWM controlled 5V servo motors. The own clock on the MotoPi provides a very accurate PWM signal and therefore also an accurate positioning. The board has 2 inputs for a voltage of 4

High-quality, 300 watt server power supply with up to 90% efficiency.

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

HuiYuan Opto-Electronic LED 5 mm V-TOP clear red 350 mcd 635 nm 120°

HuiYuan Opto-Electronic LED 5 mm V-TOP clear yellow 350 mcd 595 nm 120°

HuiYuan Opto-Electronic LED 3 mm clear green 530 nm 18000 mcd

The Arcade Joystick from Joy-IT is robust and a true all-rounder. Whether you want to use your Raspberry Pi to emulate an arcade machine or control a robot arm, the Arcade Joystick provides faithful service. Thanks to its high-quality microswitches, it ca

Compatible Arduino™ Mega 2560 Board This compatible Arduino™ Mega 2560 board is a microcontroller board based on the ATmega2560. It has 54 digital I/O pins (14 of which can be used as PWM outputs), 16 analogue inputs, 4 UARTs (serial hardware interfaces),

USB stick module for programming the ESP8266, in ESP-01 design The ESP module is plugged into the USB stick and the stick is connected with your PC or Raspberry Pi. This then establishes a serial communication interface between the PC and the ESP8266 modu

High-quality, 500 watt server power supply with up to 92% efficiency.

Zener diode Housing: DO-204AL

The DFG12038B12DN is a 120 mm fan with a high static air pressure of 31.10 mmH2O and an airflow rate of 332.50 cbm/h at 5500 rpm. It is the ideal candidate for use in systems where a lot of heat is generated during operation, such as when a large number o

HuiYuan Opto-Electronic LED 5 mm diffused yellow 350 mcd 595 nm 60°