Miscellaneous - AutoCell Electronics, CnMemory, MM Spray, Romagna Plastic (798)

Connecting cable, red/black, angled/straight 4 mm connection, for HIOKI multimeters from product series DT425x/DT428x or similar, CAT III 1000 V, CAT IV 600 V, 120 cm length

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 20 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

shiverpeaks®-BASIC-S--Cable entry aid, nylon, 3 mm, 30m Use the cable entry aid to pull your cabling through ductwork effortlessly. An eyelet is provided on the nylon pull wire to fasten the cable to, and a guide spring to make it easier to negotiate ang

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Reisser R2 — flat countersunk head, PZD Phillips, Pozidriv Hardened steel, blue zinc plated, sliding surface, RN 9200 VG, full thread Thread: 4.0 mm Length: 35 mm Content: 200

Thermocouple, type K, 0.3 mm diameter, 80 cm length, -40°C to 260°C, For HIOKI DT4281, DT4282 and DT4253 digital multimeters

ERSADUR soldering tip for i-CON TRACE soldering station

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

Reisser R2 — flat countersunk head, PZD Phillips, Pozidriv Hardened steel, blue zinc plated, sliding surface, RN 9200 VG, full thread Thread: 3.5 mm Length: 40 mm Content: 200

Strong magnetic ring to secure screws. Screwdriver bit can be recessed into the holder to create a contact surface for the screw head. Ideal for hard-to-reach places. For manual operation, electric screwdriver and drills. Drive: Hexagon, solid 6.3 (1/

14-mm carbon trimmer potentiometer with plastic housing and degree of protection IP 5 (dust-proof). Feature: • Self-extinguishing plastic parts in accordance with UL 94 V-0. Applications: • Electronic devices: white goods, brown goods, small household app

Universal drill bit, 4.0 mm Areas of application: Masonry, tiling, (some) glass, marble, plastics, metal, non-ferrous metals, coated chipboard, lightweight materials. These drill bits are not intended for rotary percussion drilling, but may be used for li

Assortment box, assortment case made of transparent, unbreakable polypropylene with clear cover and stable slide locks. • With 32 compartment partitions • Dimensions (W x D x H): 338 x 260 x 57 mm

ERSA i-Tip long-lasting soldering tip range with ERSADUR-LF coating for the soldering iron i-tool in the soldering station i-CON version 0IC1000A, 0IC2000A, 0IC2000AIT, 0IC2000AC and 0IC2000AXT .Technical data: Long-lasting tip design: straight. Tip coati

Earth bonding point (EBP) 1 MOhm safety resistor per connection. 2 m earth conductor with 4 mm lug Tabletop and under-table mounting. 3 x 10 mm push-button

Tool compatibility: For use with the WXMPS MS smart soldering irons and the Wxsmart soldering station Perfect for all micro and standard applications for micro and standard component sizes: Smart, active, high-performance soldering tips for micro and stan

ERSADUR soldering tip for i-CON TRACE soldering station

Replacement soldering tip for LR20/21, FE50 soldering iron/station. • 2.0 mm (Use in the more recent LR21 piston with 2-piece tip only in conjunction with WELLER SLEEVE possible)

Ideal for decorations on colourful materials or for concealing repairs on white materials. Glue sticks 250 mm, white, 250 g • For a wide range of materials such as paper, cardboard, felt, textiles and many others • Solvent-free, holds after 10 seconds and

PROXXON polishing felt disc, medium-hard, Ø 50 mm, is ideal for polishing metals (e.g. stainless steel, brass and copper).

Earthing measurement cable, 4 mm connection, yellow, 50 m length, with cable reel

ESD discharge cable with integrated resistor. Spiral cable, 2x press-stud 10 mm/10 mm Length: 2.4 m

ESD discharge cable with integrated resistor. Spiral cable, 3 mm press-stud to 10 mm press-stud Length: 2.4 m

9437 folding bag 88/1 Vario 11, 200 x 95 mm

Coupler for DC power plugs • Straight design • With soldering eyelets • With anti-kink protection • Opening Ø: 5.7 mm • Pin Ø: 2.35 mm

Magnetic adapter, 4 mm, red

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

Zener diode Housing: DO-204AL

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

SRBZ Round brush with plaited wire

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm