Miscellaneous - AutoCell Electronics, Gedore, Romagna Plastic (118)

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Ring offset to 15°, reversible for right and left hand operation Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel Matt satin chrome-plated finish Chrome-vanadium steel

In handy sheet metal case In robust sheet metal case

Stable lock with adjustable strap With flexible straps inside For tools up to 240 mm in length With 8 resp. 12 compartments standard and 1 compartment for small parts Without spanners Without tools

Ring 15° offset from shaft Hexagon gap 30° offset, UD-section at 15° offset Sizes 8x10 to 12x14 mm with hexagon For applications involving hydraulic/brake lines GEDORE vanadium steel 31CrV3, chrome-plated * not standardised Hexagonal opening 30° offset, U

With 2 hexagons, same size each end Long blade with ball end 2C-T-handle with hanging hole GEDORE vanadium steel 61CrSiV5, chromated Vanadium steel 61CrSiV5, chromated

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle No. 2270 5 with adjustable third pressure roller for optimally guiding different pipe dimensions With quick-release Body in pressure-cast aluminium Ename

Acc. to DIN 5128-90, 90 Shore A With 2 flat surfaces With ash handle

Hammer head forged, black varnished, striking face and pein polished Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve Doubly contoured hickory handle DIN 5111 with extra long, hardened steel handle protective sleeve ROTBAND-PLUS handl

Flexible thin shaft for smallest gaps

Slim pattern, oval shaft GEDORE vanadium steel 31CrV3, heads finely polished, chrome-plated * not standardised Jaw: ground precisely to exact nominal size for optimum contact areas Secure grip thanks to slim profile shaft Overloading indicated by deformat

For stamping out cardboard, leather, rubber, sealing materials and other soft materials Cutting edge hardened Shaft blue varnished In plastic wallet no. 570390 In plastic rolling bag

Flexible thin shaft for smallest gaps

Zener diode Housing: DO-204AL

Further panels can be added in either direction, with special spacers for wall fitting Made from solid sheet steel 1.5 mm thick, all 4 edges are bevelled Euro perforation 10 x 38 mm Dimensions: L 987 x H 493 mm GEDORE blue powder-coated Tools not supplied

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

Hammer head forged, black varnished, striking face and pein polished Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel Powder-coated with silver hammer-effect enamel

Universal use for service and assembly work With all advantages of a recoilless hammer with higher impact Less energy necessary, easier working With exchangeable splinter-proof, shatter-proof and wear-resistant polyamide head (E 247), 75 Shore D, tested t

36 1-140 made from C45 steel 36 2-200 made from GEDORE vanadium steel 31CrV3 Chrome-plated

Jaw set at 15° GEDORE vanadium steel 31CrV3 Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger Sizes 10 - 135 mm with hanging hole * not standardised Jaw set at 15° Secure grip thanks to profile shaft - very ergonomic and handy Ov

The small, free-turning deburring knife adjusts to the contour of the workpiece and removes burr The small deburring knife can rotate freely to adapt to the contour and remove the burr

Bristle field 110 x 40 mm Bristle field 110 x 40 mm

With 13 mm hexagon drive and additional adaptors for 9, 10, 11 and 14 mm With pivoted hook for right or left hand operation Enamelled blue Painted blue

Also suitable for stainless steel pipes Spare chain E 4589 A Spare chain No. E-4589 A

Body in zinc-plated pressure-cast aluminium, for pipes 35 - 66mm Ø, cutting wheel made from high-alloy stainless steel, especially for cutting stainless steel pipes with high service life. Easy handling via ratchet feed with automatic infeed of the cuttin

Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle Cutting wheel with high service life No. 2180 3 and 2180 4 body in pressure-cast magnesium, no. 2180 5 body in pressure-cast aluminium No. 2180 5 with qu

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Drop-forged hammer head, black paint-finished, of heat-treated steel Striking surfaces inductively case-hardened for tough long-term work Acc. to DIN 1041 DIN, manufacturer and weight marked for permanence Safety bevel precision-ground to 45° at striking

Ring offset to 15° Chrome-vanadium, chrome-plated Jaw set at 15° Matt satin chrome-plated finish Chrome-vanadium steel

Working edges carefully hardened and tempered Working ends evenly hardened and carefully tempered

Ergonomic, air-cushioned 2-component handle Optimum impact force - a result of its perfect balance Fatigue-free working due to the new anti-vibration system With straight-through shaft right to the end of the handle With magnetic nail holder With magnetic

Hardened in accordance with the technical specifications for striking tools to DIN 7255 Working edge polished and clear varnished In PVC holder In PVC holder

GEDORE vanadium steel 31CrV3, chrome-plated Vanadium steel 31CrV3, chrome-plated

Carefully hardened and tempered along the full length Carefully hardened and tempered along the full length