Miscellaneous - AutoCell Electronics, Knipex, PowerPlus, Romagna Plastic, Sensor (372)

Precision circlip pliers for internal circlips (holes) For fitting circlips in holes in the 8 - 13 mm dia. range High load capacity in continuous operation, up to 10-fold higher service life Precise, effortless screwed joint Forged Large contact surfaces

With electrically conductive coating: Universal ESD tweezers balance and control potential differences between their user and the components. They meet the requirements of the electronics and precision mechanics industry and protect sensitive components.

Knipex crimping lever pliers for modular jack For cutting and stripping flat telephone cable and crimping 4, 6 and 8-pin modular plugs, RJ11/RJ12/RJ45. Precise crimping action owing to parallel crimping and lock, energy-saving lever mechanism with length

Knipex wire end ferrules assortment with pliers. In TANOS MINI-systainer® with wire end ferrule pliers 97 71 180. Fitted with wire end ferrules with plastic collars. Contents: Per 200 pieces 0.5/0.75/1.5/2.5 mm² Per 150 pieces 4.0/6.0 mm² Per 50 pieces 10

Knipex crimping die For KN 97 43. For wire end ferrules 10/16/25 mm².

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Pliers wrench 250 mm, up to SW46 mm Pliers and wrench in one tool with parallel-guided gripping jaws, quick adjustment by pushing a button directly on the workpiece. Ideal for gripping, holding, pressing and bending workpieces. Infinitely variable grippin

KNIPEX universal stripping pliers, 0.03 - 10 mm² Self-adapting universal wire strippers The cutting edges of the jaws hold the stripped conductor reliably, so that slippage is prevented. The pair of stripper knives cut the correct cutting depth without ma

Electronics side cutters, Super-Knips Produced from INOX stainless steel with precision Milled non-bevelled cutting edges for co-extensive cutting. With wire clamp. Extremely effortless motion, with opening spring. Length: 125 mm Cutting force: 0.2 to 1.

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

pliers grey atramentized, head polished, handles with slim multi-component grips

Roll-up bag with 4 compartments made of durable polyester fabric. With practical, adjustable quick release fastener. Dimensions, opened (L x H): 315 x 275 mm.

for SMD-technology* angled tips smooth gripping surfaces

Knipex crimping die For KN 97 43. For non-insulated plug connectors 0.5 - 6/4.8/6.3 mm².

90 10 165 E02 Spare blade for 90 10 165 BK (10x)

Spring steel, high-strength

pliers grey atramentized, head polished, handles with multi-component grips, with integrated tether attachment point for a tool tether

Revolver punch pliers with opening spring and lock, as well as 6 removable blow holes (dia.2.0/2.5/3.0/3.5/4.0/5.0 mm) For punching holes in leather, textile and plastic material.

End angle cutting pliers For precision work on electronic parts. Box joint, play-free box precision joint, low-friction double spring, mirror-finish surface. Length 120 mm, short head, angled 35°, small bevel. Cutting force: Up to 0.6 mm in diameter.

Premium chisels with self-sharpening effect offer the longest service lifes for the maximum efficiency in terms of results - durable and powerful.

Combination/cable shears for copper and aluminium cable, with sharp, precision-ground blades, adjustable screwed joint. Length 140 mm Cutting force: Copper up to 10 mm in diameter Aluminium up to 24 mm in diameter

Sturdy construction made of ABS material, black All-round double aluminium frame Detent torque hinges that function as cover holders Robust, ergonomic carrying handle Two lockable clamp locks A removable tool panel in the lid with 15 tool slots on th

Replacement cutter for stripping pliers 1240200

Universal key for common cabinets and shut-off systems For locking systems in electrical engineering, the supply of gas and water, air-conditioning and ventilation systems, industry, technical installations in buildings etc. 9 different closures produced

Solar plug connector, MC 4 (multi-contact) Capacity 4.0 - 10.0 mm2 AWG: 11 - 7 3 nests

The epoxy resin system Casting Resin Plus 90 is a sealing compound that is as clear as glass once hardened.

End cutting nippers for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. • Length: 115 mm • Small bevel • Mini-cutter Cutting force: soft wire up to 0.8 mm in diameter.

KNIPEX Alligator water pump pliers, 180 mm Box joint, high stability provided by double guide. Self-locking on pipes and nuts, no slipping on the work piece. Chrome vanadium electrical steel, oil hardened and tempered, teeth hardness approx. 61 HRC. Lengt

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 115 mm, pointed-round jaws.

Knipex crimping die For KN 97 43. For coax connectors RG58/59/62/71.

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

Equipped with tools for photovoltaics without crimping dies–for individual assignment–please order separately. With fitting tool (Allen wrench) for replacing crimping dies. Included in delivery: • Precision stripping pliers 12 12 11 • Cable shears 95 1

head polished, handles with multi-component grips

Cable jacket knife, VDE-tested up to 1000 V. Insulated blade backs, with protective cap and sliding shoe on blade tip, as a result, there is no damage to the inner conductor insulation. Length: 180 mm

Knipex crimping die For KN 97 43. For wire end ferrules 35-50 mm².

For stripping UTP and STP data cables 4.5 to 10.0 mm in diameter Stripping device for cross-sections of 0.2/0.3/0.8/1.5/2.5/4 mm² Two-level, hinged stripping tool With opening spring and locking pawl Mounting clip for secure storage Housing: Plastic,

For Knipex Crimp System Pliers For heat shrinkeable sleeve connectors.

Mini pliers wrench, pliers and wrench 86 03 150 KNIPEX Cobra®, high-tech water pump pliers 87 01 125 Tool bag made from durable polyester fabric, with rip-tape fastener and belt loop Dimensions (W x H x D): 70 x 170 x 50 mm

87 09 300 V01 Protective jaws 87 xx 300 (3 pairs)

For hard wire cables, also suitable for cabling and round steel • Precise, effortless screwed joint • With safety catch Special blade geometry prevents the wire cable fanning out Chrome vanadium high-performance steel, oil-hardened and tempered