Miscellaneous - AutoCell Electronics, Knipex, Romagna Plastic, Sensor (340)

Cable cutters with ratchet principle For copper and aluminium cable, one-handed operation, two-stage sprocket drive for easy cutting. Cuts smoothly and cleanly without crushing, also suitable for stripping. Can be used even in confined spaces. Not suitabl

Knipex electronics pliers assortment In synthetic leather case. 7-piece tool kit for working on electronic components. Contents: 3x electronics gripping pliers 115 mm (3512115, 3522115, 3532115) 2x electronics side cutters 115 mm (7702115, 7742115) 1x ang

Single-handed crimping lever pliers from KNIPEX For wire end ferrules from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with exce

Automatic stripping pliers: 2.5 - 10.0 mm² These innovative patented universal stripping pliers are suitable for precise, damage-free stripping and unsheathing of all electronic single and multi-conductor cabling, in particular also with PTFE insulation.

KNIPEX side cutters for universal use, with inductively hardened precision blades, polished head, standard bevel. Length: 180 mm Plastic sleeves VDE-insulated 1000 V, IEC 900 Cutting force: Soft wire up to 2.5 mm in diameter, Hard wire up to 4.0 mm in dia

pliers chrome plated, handles with multi-component grips

pliers chrome plated, handles with multi-component grips

Electronic side cutters, Super-Knips. Play-free joint, extremely effortless motion, precision-milled. cutting edges without grinding, with opening spring and limiter. Length 125 mm, narrow head, without bevel Cutting force: soft wire from 0.2 to 1.0 mm in

Wiring pliers for gripping, bending and stripping insulation from wires from 0.5 - 0.75/1.5 and 2.5 mm² as well as for crimping wire end ferrules 0.75/1.5/2.5mm².

Zener diode Housing: DO-204AL

Knipex mini-pliers wrench Pliers and wrench in one tool with parallel-guided gripping jaws, quick adjustment by pushing a button directly on the workpiece. Ideal for gripping, holding, pressing and bending workpieces. Infinitely variable gripping of all w

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 145 mm, Flat-round, long jaws.

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 160 mm Head chrome-plated, handles VDE-insulated 1000 V. Stripping values: 0.5 to 5 mm diameter

head mirror polished, handles with multi-component grips, Oblique End Cutter, short head Style 5: Oblique End Cutter, short head, without bevel, for flush cutting, a = 27°

tool burnished, handles with multi-component grips

With replaceable blades for four or six different conductor cross-sections Conductor is not damaged thanks to precisely ground shaped blade, even fine-stranded wire are gently stripped Clamping jaws hold the wire firmly while stripping With adjustable

ESD positioning tweezers hold, insert and pull: With dimensionally adapted shapes, the gripping surfaces are ideal for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore be inserted and move

pliers grey atramentized, head polished, handles with slim multi-component grips

Circlip pliers set. 4-piece in wallet. Contents: 1 piece each KN 4811J1/4811J2/4911A1/4911A2 Wear protective goggles when working with retaining rings.

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

Precision Electronics Gripping Pliers for very precise assembly work, e.g. in electronics and fine mechanics for gripping, holding and bending smoothly ground gripping surfaces, edges finely rounded approx. 20% lighter than conventional electronics pliers

For Knipex Crimp System Pliers For non-insulated tubular cable lugs and crimp terminals in accordance with DIN 46237 and non-insulated butt and crimp connectors in accordance with DIN 46341.

Positioning tweezers for holding, inserting, and pulling: With dimensionally adapted shapes, the gripping surfaces are ideally suited for positioning or pulling round or cubic components, for example. Even the smallest elongated components can therefore b

pliers grey atramentized, head polished, handles with slim multi-component grips

Electronics side cutters for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length: 115 mm, round Head shape, without bevel Cutting force: Soft wire from 0.3 to 1.3 mm diam

For burr-free cutting of plastic piping (e.g. plastic reinforced pipes) with a diameter of 6 - 35 mm Not suitable for cable cutting Blades can be replaced and can be retrieved from any position Little force is required thanks to special cutting geometr

Knipex coated-wire stripping tweezers for removing paint insulation on copper wiring with diameter of approximately 0.6 mm. With interchangeable knives, spring steel, plastic grips. Length: 120 mm

Knipex crimping die For KN 97 43. For D-Sub connector 0.08 - 0.56

pliers chrome plated, handles with multi-component grips

chrome plated, handles with multi-component grips

pliers burnished, handles with multi-component grips, with 3 interchangeable crimping dies

pliers chrome plated, handles with multi-component grips

For stripping thin copper conductors 0.3 - 1.0 mm² (AWG 23-18) Precise stripping due to tool's stepwise adjustment to the conductor diameter • With wire stripper • With length stop: adjustable from 4.0 to 15.0 mm • With safety catch • Housing: plastic, im

pliers chrome plated, handles with multi-component grips, with integrated tether attachment point for a tool tether

non-insulated terminals + cable connectors

With electrically conductive coating: Universal ESD tweezers balance and control potential differences between their user and the components. They meet the requirements of the electronics and precision mechanics industry and protect sensitive components.

KNIPEX side cutters, 140 mm From vanadium electric steel for hard and soft wire with inductively hardened precision blades, cutting edge hardness approx. 62 HRC, polished head. Length: 140 mm For wire diameter 4.0 mm (soft)/1.8 mm (hard) New 2-component h

liers black lacquered, handles with multi-component grips insulated terminals + cable connectors 0,75 - 6,0 / 18 - 10

Suitable for 95 05 20 SB electrician's scissors, ideal for CutiX universal knives or similar slim tools such as installation pliers, TwinGrip etc., made of durable polyester fabric

Optimally suited for design fittings and other highly sensitive materials thanks to soft, smooth gripping surfaces. Allows use on chrome if the jaws of the pliers wrench have been damaged by improper or too rough use.