Miscellaneous - AutoCell Electronics, Knipex, Romagna Plastic (342)

Identical to KN 77 02 115 but with dissipative grip casings for electrostatic protection. Electronics side cutters for precision work on electronic components. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length

pliers black atramentized, head polished, handles with multi-component grips

Electronic gripping pliers For precision work on electronic parts. Box joint, play-free precision joint, low-friction double spring, mirror-finish surface. Length 115 mm, flat-round jaws.

Assortment box with twin ferrules: 4.0 - 16.0 mm² 20x 2 x 4.0 mm² in grey 10x 2 x 6.0 mm² in yellow 10x 2 x 10.0 mm² in red 5x 2 x 16.0 mm² in blue

Knipex latest-generation crimping lever pliers with reduced manual force by up to 30% compared to commercially available crimping pliers owing to innovative lever transmission, two-handed operation for easy crimping of large conductor cross-sections. Adju

Universal tweezers set Included in delivery: 1 x 92 47 01 KNIPEX universal insulated tweezers 1 x 92 27 61 KNIPEX universal insulated tweezers 1 x 92 37 64 KNIPEX universal tweezers 1 x 92 27 62 KNIPEX universal insulated tweezers 1 x 92 67 63 KNIPEX univ

Stripping pliers with set screw for adjusting to the desired wire or wire strand diameter. Length: 140 mm Head chrome-plated. Stripping values: 0.1 to 0.8 mm diameter

Insulated precision tweezers for work on live equipment up to 1000 V AC. With narrow tips and 45° curved shape. Nickel-plated, VDE-tested, length 150 mm.

Electrician's gloves according to DIN-EN 60903. Protection when touching live parts. Size 9. VDE-tested 1000 V.

For Bowden cables and soft wire ropes (including V2A) up to diameter of 3.0 mm Light, clean cut thanks to special cutting edge shape Sickle-shaped cutting edges enclose the cut material and prevent splicing of the wire rope Little force needed owing to

With replaceable blade

KNIPEX side cutters for universal use, with inductively hardened precision blades, polished head, standard bevel. Length: 160 mm. Plastic sleeves IEC 900 Cutting force: Soft wire up to 3.0 mm in diameter, hard wire up to 1.5 mm in diameter.

Optimally suited for design fittings and other highly sensitive materials thanks to soft, smooth gripping surfaces. Allows use on chrome if the jaws of the pliers wrench have been damaged by improper or too rough use.

Combination pliers, lightweight, with cutting edges for hard and soft wire, long cutting edges for thicker cable. Blades additionally inductively hardened. Length: 180 mm Head chrome-plated, handles VDE-insulated, 1000 V. Cutting force: Soft wire up to 3.

Replacement blade with guide shoe for stripping knife 16 50 145 SB

90 23 01 E01 Spare blade for 90 23 01

pliers black atramentized, head polished, handles with multi-component grips

Crimping pliers for wire end ferrules For crimping wire end ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm² Crimping in marked half-round dies for reliable connections between the sleeve and the conductor 9 particularly deep dies with coni

1 x replacement cutter for KN 12 42 195

Knipex stripping side cutter. Indispensable pliers for cutting and stripping for electrical installation. Head chrome-plated, inductively hardened Precision cutting edges for soft wire Up to 4 mm in diameter. Stripping holes 1.5 and 2.5 mm². Grip casings

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

pliers black atramentized, head polished, handles with multi-component grips

Nickel-plated pliers Shape 0: jaws for round material, with wire strippers Hold round, shaped and flat material securely High load capacity With adjusting screw and release lever One hand operation High clamping pressure owing to knee lever ratio Pliers b

Cable cutter insulated with multi-component casings, VDE-tested 250 mm For cutting copper and aluminium cables, single and multi-wire. Not suitable for steel wire and wire cable. Hardened precision-ground blades. Cuts smoothly and cleanly without crush

IEC 60900 DIN EN 60900 ASTM F1505 • Full insulation reduces the risk of short circuit • For counter fitting and counter lock • Plastic, glass-fibre reinforced • Handles with soft plastic zone for a secure hold With the high-quality and robust plastic p

KNIPEX Alligator water pump pliers, 300 mm Box joint, high stability provided by double guide. Self-locking on pipes and nuts, no slipping on the work piece. Chrome vanadium electrical steel, oil hardened and tempered, teeth hardness approx. 61 HRC. Lengt

ESD plastic tweezers set Included in delivery: 1 x 92 09 02 ESD KNIPEX plastic tweezers 1 x 92 09 03 ESD KNIPEX plastic tweezers 1 x 92 09 01 ESD KNIPEX plastic tweezers 1 x 92 09 04 ESD KNIPEX plastic tweezers 1 x 92 09 05 ESD KNIPEX plastic tweezers

Electronics side cutters, ESD protected In this pliers design, electrostatic energy is dissipated through the handles slowly and in a controlled manner. This protects devices susceptible to electrostatic discharge in accordance with applicable standards,

KNIPEX power combination pliers 200 mm For heavy-duty applications with 35% less force required thanks to new, improved lever ratios. The optimally positioned joint allows easier cutting, as well as powerful gripping, bending and pulling. Inductively hard

Precision circlip pliers for internal circlips (holes) For fitting circlips in holes in the 8 - 13 mm dia. range High load capacity in continuous operation, up to 10-fold higher service life Precise, effortless screwed joint Forged Large contact surfaces

With electrically conductive coating: Universal ESD tweezers balance and control potential differences between their user and the components. They meet the requirements of the electronics and precision mechanics industry and protect sensitive components.

Knipex crimping lever pliers for modular jack For cutting and stripping flat telephone cable and crimping 4, 6 and 8-pin modular plugs, RJ11/RJ12/RJ45. Precise crimping action owing to parallel crimping and lock, energy-saving lever mechanism with length

Knipex wire end ferrules assortment with pliers. In TANOS MINI-systainer® with wire end ferrule pliers 97 71 180. Fitted with wire end ferrules with plastic collars. Contents: Per 200 pieces 0.5/0.75/1.5/2.5 mm² Per 150 pieces 4.0/6.0 mm² Per 50 pieces 10

Knipex crimping die For KN 97 43. For wire end ferrules 10/16/25 mm².

Pliers wrench 250 mm, up to SW46 mm Pliers and wrench in one tool with parallel-guided gripping jaws, quick adjustment by pushing a button directly on the workpiece. Ideal for gripping, holding, pressing and bending workpieces. Infinitely variable grippin

KNIPEX universal stripping pliers, 0.03 - 10 mm² Self-adapting universal wire strippers The cutting edges of the jaws hold the stripped conductor reliably, so that slippage is prevented. The pair of stripper knives cut the correct cutting depth without ma

Electronics side cutters, Super-Knips Produced from INOX stainless steel with precision Milled non-bevelled cutting edges for co-extensive cutting. With wire clamp. Extremely effortless motion, with opening spring. Length: 125 mm Cutting force: 0.2 to 1.

Power side cutters with forged pivot axis for the toughest stresses. Handles with plastic sleeves, insulated, VDE-tested, 1000 volts.

pliers grey atramentized, head polished, handles with slim multi-component grips

Roll-up bag with 4 compartments made of durable polyester fabric. With practical, adjustable quick release fastener. Dimensions, opened (L x H): 315 x 275 mm.