Miscellaneous - Cable - B-Move, Black Widow, CF Light, Clear-Lite, CM Storm, DLU Lighting, Einhell, iRobot, Lucide, Noctua (37)

4-pin PWM Y cable for connecting 3 PWM fans to 1 PWM header on the motherboard

4-pin PWM Y-cable for connecting 2 PWM fans to 1 PWM header on the motherboard

The connectors have been developed for use in systems-, control- and electrical equipment engineering. It is the responsibility of the user to check whether the connectors can also be used in other areas of application. To protect against unintentional op

The NA-SEC1 chromax.blue set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, multi

The NA-SEC1 chromax.green set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, mult

The NA-SEC1 chromax.yellow set is an accessory kit for fans and includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, mul

The NA-SYC1 chromax.blue set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

Power connector cable for our LED light strips, 8 mm wide (type 3528) DC 5.5/2.1 mm Cable length 190 mm

The NA-SEC1 is a fan accessory set consisting of three fully sleeved NA-EC1 30cm Extension Cables for 4-pin PWM fans. The NA-EC1 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required.

This bronze pendant light makes an ideal addition to our vintage range. The integrated cable is adjustable up to a maximum of 150 cm, meaning that it adapts perfectly to your requirements. The steel base is very robust and promotes long-term use. The uniq

Power connector cable for our LED light strips, 10 mm wide (type 5050) DC 5.5/2.1 mm Cable length 190 mm

The NA-SYC2 is a fan accessory set consisting of two fully sleeved NA-YC2 Y-Cables for 3-pin fans. The NA-YC2 Y-Cables make it possible to run two 3-pin fans on a single fan header. Scope of Delivery 2x NA-YC2 Y-Cables

The NA-SEC1 chromax.red set is a fan accessory kit that includes three NA-EC1 30-cm extension cables. The 4-pin connectors of the NA-EC1 cables are compatible with both 4-pin PWM and 3-pin fans. If larger cases require more than a 30-cm range, multiple NA

The NA-SYC1 chromax.green set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

The NA-SEC2 is a fan accessory set consisting of three fully sleeved NA-EC2 30cm Extension Cables for 3-pin fans. The NA-EC2 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required. Sco

The NA-SYC1 chromax.red set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time. M

The NA-SYC1 chromax.yellow set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time

The NA-SYC1 is a fan accessory set consisting of two fully sleeved NA-YC1 Y-Cables for 4-pin PWM fans. The NA-YC1 Y-Cables make it possible to run two 4-pin PWM fans on a single fan header and to let the mainboard control the speed of both fans simultaneo

The NA-SYC1 chromax.black set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

The extension cable can be used to extend the space between the power supply and your first light point or to extend the space between lightpoints. Total maximum system length per power supply is 35 metres Plug in and light up your outdoor space Extension

LED light chain 10 mtr ''yarn spool'' with 100 LEDs, with USB charging cable with on/off switch. String of lights with a simple, neutral design provides the perfect magic of light for any occasion, all year round. Our elegant string of lights on a spool c

Signal light 220 V from MENTOR, LED Ø 5 mm Colour: green Connection: 10 cm cable VDE approval Protection class, front panel: IP40 Push-in fastening in the installation opening approximately Ø 10.3 mm Housing: transparent, white

The SKINTOP ST comes into its own wherever cables and wires need to be inserted into an enclosure safely! Variety of accessories (e.g. multi-sealing inserts) Increased oil resistance for greater functional reliability Long-lasting vibration protection

The SKINTOP ST comes into its own wherever cables and wires need to be inserted into an enclosure safely! Variety of accessories (e.g. multi-sealing inserts) Increased oil resistance for greater functional reliability Long-lasting vibration protection

LED light chain 15 mtr ''yarn spool'' with 150 LEDs, with USB charging cable with on/off switch. String of lights with a simple, neutral design provides the perfect magic of light for any occasion, all year round. Our elegant string of lights on a spool c

For securing cables both longitudinally and laterally to the profile. Mount with a quarter turn in the groove.

Mundan light ball, white, 300 mm, replaceable bulb Voltage: 230 VAC For E27 LED bulbs, max. 15 W UV-resistant With 3-m connection cable and plug Ground spike Material thickness: 3.3 mm For indoor and outdoor use Dimensions: Diameter: 300 mm

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

This 4 pin fan cable by Delock with PWM support enables the extension of the fan connection. The 4 pin male fan connector is also suitable for the connection of a 3 pin fan connector without PWM support. Specification Connectors: 1 x 4 pin fan connector m

The BT-BO 25/1 A LED SP jump-start cable provides excellent assistance when jump-starting petrol and diesel engines. The four terminals are fully insulated and equipped with LED lighting. The conductor material consists of 31.4 mm² aluminium (= 25 mm² cop

The BT-BO 25/1 A jump-start cable provides even inexperienced users with excellent assistance when bridging and/or jump-starting petrol and diesel engines. It is equipped with four fully insulated terminal clips. The conductor material consists of 31.4 mm

The BT-BO 16/1 A jump-start cable provides even inexperienced users with excellent assistance when bridging and/or jump-starting petrol engines. It is equipped with four fully insulated terminal clips. The conductor material consists of 19.4 mm² aluminium

Signal light 220 V from MENTOR, LED Ø 5 mm Colour: red Connection: 10 cm cable VDE approval Protection class, front panel: IP40 Push-in fastening in the installation opening approximately Ø 10.3 mm Housing: transparent, white

This umbra-grey pendant light makes an ideal addition to our vintage range. The integrated cable is adjustable up to a maximum of 150 cm, meaning that it adapts perfectly to your requirements. The steel base is very robust and promotes long-term use. The