Miscellaneous - Cable - B-Move, Black Widow, Clear-Lite, Han, Noctua, O'Tech, Sperry Top-Sider, Trend, V-Mark (37)

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 5,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 30,0m

This DisplayPort cable by Delock is used to connect devices with a DisplayPort interface, such as monitors, projectors or televisions, to a PC or laptop. Supporting a maximum bandwidth of 32.4 Gb/s, content can be displayed in 8K Ultra HD (7680 x 4320 @ 6

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 2,0m

50-cm-long cable, from internal USB 3.0 male to internal USB 3.0 female. Connections: 1x 20-pin pin header USB 3.0 male 1x 20-pin pin header USB 3.0 female Max. data transfer rate: 5 Gbit/s Length: 0.5 m Packaging: retail packaging (bag with round eyel

The NA-SEC1 is a fan accessory set consisting of three fully sleeved NA-EC1 30cm Extension Cables for 4-pin PWM fans. The NA-EC1 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required.

This network cable by Delock can be used to connect different networking devices, e.g. a NIC to a switch or a patch panel. For industrial and outdoor The network cable is ideal for outdoor use and offers increased resistance to UV light, cold, heat, mois

One side of the cable is equipped with a 90°-angled USB type-C connector, and the other side of the cable features a USB type-A port Conforms to the USB 3.0/USB 3.2 Gen 1 standard (transfer rates up to 5 Gbps) Supports OTG For charging of and exchangin

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 15,0m

The NA-SYC2 is a fan accessory set consisting of two fully sleeved NA-YC2 Y-Cables for 3-pin fans. The NA-YC2 Y-Cables make it possible to run two 3-pin fans on a single fan header. Scope of Delivery 2x NA-YC2 Y-Cables

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 1,0m

The NA-SEC2 is a fan accessory set consisting of three fully sleeved NA-EC2 30cm Extension Cables for 3-pin fans. The NA-EC2 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required. Sco

The NA-SYC1 is a fan accessory set consisting of two fully sleeved NA-YC1 Y-Cables for 4-pin PWM fans. The NA-YC1 Y-Cables make it possible to run two 4-pin PWM fans on a single fan header and to let the mainboard control the speed of both fans simultaneo

The NA-SYC1 chromax.black set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

Flexible cable holder for cables with Ø 7.9 - 10.3 mm • Self-adhesive • Adjustable • Natural Material: PA 66 (RMS-01) Adhesive film: -20°C to +50°C continuous temperature Cover film: overlapping

PCIe 3.0 standard 200-mm riser length Flexible riser cable with rubberised shielding Can be used universally or for IM-1 Pocket The RC-01 riser cable offers, for universal applications, the possibility of 200-mm long expansion of a motherboard PCIe x16

The inductive receiver allows the localization of even weak signals with acoustic and optical signal output. It enables accurate identification even in the most crowded bundles. The tester can communicate with the tone generator (Model R180003) or any TRE

SIGNALTEK CT generates a PDF report to prove that the installed data cables can transmit Gigabit Ethernet traffic at full data rate without errors, and confirm the correct connection (wiring diagram). *** Now with touchscreen *** SignalTEK CT Easy to use:

VDV II the universal wiring tester - cloud-connected with Bluetooth and report function for important basic testing to avoid connection problems. The VDI II cable tester is easy to operate and allows the rapid verification of the copper cable of voice, d

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 3,0m

Cable length 15 cm

Cable length 5 cm

Cable length 15 cm

Flexible cable holder for cables with Ø 25.4 - 31.7 mm • Self-adhesive • Adjustable • Natural Material: PA 66 (RMS-01) Adhesive film: -20°C to +50°C continuous temperature Cover film: overlapping

15 cm cable length without connector

Accessory set for UTS5000A series 2.92J RF cable (UT-W03-40GHz) x 1 2.92-KKG double socket adapter (UT-C04-40GHz) x 2 MA-N-KJG adapter (UT-C03-18GHz) x 1 Accessory bag (UT-CK02) x 1

Accessory set for UTS3000A series - Spectrum Utility Kit NSMAJ-NJ-0.7M DC-6G cable x 1 NJ-NJ-0.7M DC-6G cable x 1 SMA-N-KJ-T DC-6GHz adapter x 2 N-BNC-JK DC-4GHz adapter x 2 2400 MHz-2500 MHz antenna x 2 824-960 MHz/1710-1990 MHz antenna x 2

Subminiature incandescent lamp with cable

With its textile sheath and 60 W PD Quick Charge, the 1-metre long Inter-Tech USB-C cable is ideal for charging and synchronising mobile devices. Thanks to the 90° angled connector, a space-saving connection is possible.

Flexible cable holder for cables with Ø 14.7 - 19.1 mm • Self-adhesive • Adjustable • Natural Material: PA 66 (RMS-01) Adhesive film: -20°C to +50°C continuous temperature Cover film: overlapping

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 5,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 10,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 15,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 20,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 7,5m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 3,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, orange, 30,0m