Miscellaneous - Cable - B-Move, CF Light, Clear-Lite, Durable, Han, Noctua, Sensor, Sperry Top-Sider, Trend, V-Mark (41)

The poster pocket is ideal for displaying information outdoors or in damp indoor areas such as in garden centres, saunas or swimming pools in which signs may get splashed with water. Details: Inserts are very well protected thanks to waterproof pressure s

The poster pocket is ideal for displaying information outdoors or in damp indoor areas such as in garden centres, saunas or swimming pools in which signs may get splashed with water. Details: Inserts are very well protected thanks to waterproof pressure s

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 5,0m

Sensor/actuator connection cable M12, A-coded, 8-pin, M12 plug straight - free cable end, PUR, black, unshielded . Flexible, silicone and halogen-free control cable with high mechanical strength. The cable is resistant to chemicals, hydrolysis and microb

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 30,0m

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 2,0m

Power connector cable for our LED light strips, 8 mm wide (type 3528) DC 5.5/2.1 mm Cable length 190 mm

The NA-SEC1 is a fan accessory set consisting of three fully sleeved NA-EC1 30cm Extension Cables for 4-pin PWM fans. The NA-EC1 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required.

This bronze pendant light makes an ideal addition to our vintage range. The integrated cable is adjustable up to a maximum of 150 cm, meaning that it adapts perfectly to your requirements. The steel base is very robust and promotes long-term use. The uniq

Power connector cable for our LED light strips, 10 mm wide (type 5050) DC 5.5/2.1 mm Cable length 190 mm

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 15,0m

The NA-SYC2 is a fan accessory set consisting of two fully sleeved NA-YC2 Y-Cables for 3-pin fans. The NA-YC2 Y-Cables make it possible to run two 3-pin fans on a single fan header. Scope of Delivery 2x NA-YC2 Y-Cables

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 1,0m

The NA-SEC2 is a fan accessory set consisting of three fully sleeved NA-EC2 30cm Extension Cables for 3-pin fans. The NA-EC2 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required. Sco

The NA-SYC1 is a fan accessory set consisting of two fully sleeved NA-YC1 Y-Cables for 4-pin PWM fans. The NA-YC1 Y-Cables make it possible to run two 4-pin PWM fans on a single fan header and to let the mainboard control the speed of both fans simultaneo

The NA-SYC1 chromax.black set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

Flexible cable holder for cables with Ø 7.9 - 10.3 mm • Self-adhesive • Adjustable • Natural Material: PA 66 (RMS-01) Adhesive film: -20°C to +50°C continuous temperature Cover film: overlapping

The extension cable can be used to extend the space between the power supply and your first light point or to extend the space between lightpoints. Total maximum system length per power supply is 35 metres Plug in and light up your outdoor space Extension

LED light chain 10 mtr ''yarn spool'' with 100 LEDs, with USB charging cable with on/off switch. String of lights with a simple, neutral design provides the perfect magic of light for any occasion, all year round. Our elegant string of lights on a spool c

Sensor/actuator connection cable M12, A-coded, 8-pin, M12 plug straight - free cable end, PVC-C, gray, shielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and conveyor te

Signal light 220 V from MENTOR, LED Ø 5 mm Colour: green Connection: 10 cm cable VDE approval Protection class, front panel: IP40 Push-in fastening in the installation opening approximately Ø 10.3 mm Housing: transparent, white

The SKINTOP ST comes into its own wherever cables and wires need to be inserted into an enclosure safely! Variety of accessories (e.g. multi-sealing inserts) Increased oil resistance for greater functional reliability Long-lasting vibration protection

The SKINTOP ST comes into its own wherever cables and wires need to be inserted into an enclosure safely! Variety of accessories (e.g. multi-sealing inserts) Increased oil resistance for greater functional reliability Long-lasting vibration protection

The inductive receiver allows the localization of even weak signals with acoustic and optical signal output. It enables accurate identification even in the most crowded bundles. The tester can communicate with the tone generator (Model R180003) or any TRE

SIGNALTEK CT generates a PDF report to prove that the installed data cables can transmit Gigabit Ethernet traffic at full data rate without errors, and confirm the correct connection (wiring diagram). *** Now with touchscreen *** SignalTEK CT Easy to use:

Sensor/actuator connection cable M12, A-coded, 5-pin, M12 plug straight - free cable end, PVC, gray, unshielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and conveyor te

Sensor/actuator connection cable M12, A-coded, 4-pin, M12 plug straight - free cable end, PVC, gray, unshielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and conveyor tec

Sensor/actuator connection cable M12, A-coded, 4-pin, M12 connector straight - free cable end, PVC-C, gray, shielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and convey

LED light chain 15 mtr ''yarn spool'' with 150 LEDs, with USB charging cable with on/off switch. String of lights with a simple, neutral design provides the perfect magic of light for any occasion, all year round. Our elegant string of lights on a spool c

Mundan light ball, white, 300 mm, replaceable bulb Voltage: 230 VAC For E27 LED bulbs, max. 15 W UV-resistant With 3-m connection cable and plug Ground spike Material thickness: 3.3 mm For indoor and outdoor use Dimensions: Diameter: 300 mm

VDV II the universal wiring tester - cloud-connected with Bluetooth and report function for important basic testing to avoid connection problems. The VDI II cable tester is easy to operate and allows the rapid verification of the copper cable of voice, d

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 3,0m

Flexible cable holder for cables with Ø 25.4 - 31.7 mm • Self-adhesive • Adjustable • Natural Material: PA 66 (RMS-01) Adhesive film: -20°C to +50°C continuous temperature Cover film: overlapping

Accessory set for UTS5000A series 2.92J RF cable (UT-W03-40GHz) x 1 2.92-KKG double socket adapter (UT-C04-40GHz) x 2 MA-N-KJG adapter (UT-C03-18GHz) x 1 Accessory bag (UT-CK02) x 1

Accessory set for UTS3000A series - Spectrum Utility Kit NSMAJ-NJ-0.7M DC-6G cable x 1 NJ-NJ-0.7M DC-6G cable x 1 SMA-N-KJ-T DC-6GHz adapter x 2 N-BNC-JK DC-4GHz adapter x 2 2400 MHz-2500 MHz antenna x 2 824-960 MHz/1710-1990 MHz antenna x 2

Sensor/actuator connection cable M12, A-coded, 5-pin, M12 connector straight - free cable end, PVC-C, gray, shielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and convey

Sensor/actuator connection cable M12, A-coded, 4-pin, M12 connector straight - free cable end, PUR-C, black, shielded . Flexible, silicone and halogen-free control cable with high mechanical strength. The cable is resistant to chemicals, hydrolysis and m

Subminiature incandescent lamp with cable

Flexible cable holder for cables with Ø 14.7 - 19.1 mm • Self-adhesive • Adjustable • Natural Material: PA 66 (RMS-01) Adhesive film: -20°C to +50°C continuous temperature Cover film: overlapping

Signal light 220 V from MENTOR, LED Ø 5 mm Colour: red Connection: 10 cm cable VDE approval Protection class, front panel: IP40 Push-in fastening in the installation opening approximately Ø 10.3 mm Housing: transparent, white