Miscellaneous - Cable - B-Move, Clear-Lite, DLU Lighting, Einhell, Impress Your Dog, Knipex, Mad-X, Noctua, Paulmann, Sperry Top-Sider (191)

KNIPEX cable shears with double blade Cuts smoothly and cleanly without crushing. For single and multi-strand copper and aluminium cable. Not suitable for steel wire and hard-drawn copper conductors. KNIPEX cable shears with double blade facilitates cutti

URail power supply cable, 1 m, max. 1000 W matt chrome This 230-V cable supply in matt chrome be used anywhere in the system. It is one of just many modular parts from the URail series. A customised 230-V URail system can be designed when combined togeth

SIMPLED Outdoor extension cable IP44 2.5 m DC 24 V Black plastic The SimpLED Outdoor extension cable is compact, powerful and versatile. With a length of 2.50 metres, it can be connected to a SimpLED Outdoor transformer and a SimpLED Outdoor strip. It

Aluminium, 50 mm wide 2-part Includes installation instructions and mounting material In cardboard packaging

tool chrome plated, handles insulated with multi-component grips, VDE-tested Style 2: internal opening spring, protected and captive

This active optical cable by Delock is used to connect devices to a switch with a QSFP+ port or to connect two Ethernet switches. Specification Connectors: 1 x QSFP+ male > 4 x SFP+ male Data transfer rate: 40 Gigabit Ethernet up to 40 Gbps Compatible w

For stripping all standard round and wet-room cables from 8.0 to 13.0 mm in diameter (such as NYM cables 3 x 1.5 mm² to 5 x 2.5 mm²) Also suitable for use in branching or splitter boxes Two-level, hinged stripping tool With opening spring and locking p

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

with crimping pliers 97 22 240 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5 - 6 mm².

for cutting copper and aluminium single conductors as well as multiple stranded cables not suitable for steel wire and hard drawn copper conductors precision ground, hardened blades clean and smooth cut without crushing and deformation easy cutting wi

For Bowden cables and soft wire ropes (including V2A) up to diameter of 3.0 mm Light, clean cut thanks to special cutting edge shape Sickle-shaped cutting edges enclose the cut material and prevent splicing of the wire rope Little force needed owing to

With replaceable blade

URail power supply cable, 1 m, max. 1000 W matt black This 230 V cable supply in matt black can be used anywhere in the system. It is one of just many modular parts from the URail series. A customised 230-V URail system can be designed when combined toge

Cable cutter insulated with multi-component casings, VDE-tested 250 mm For cutting copper and aluminium cables, single and multi-wire. Not suitable for steel wire and wire cable. Hardened precision-ground blades. Cuts smoothly and cleanly without crush

Ergonomically designed handle shape with pleasantly designed slip guard More safety thanks to non-slip soft components Good power transmission when pulling the knife through thumb recess and ''finger hook'' at the end of the handle Transparent protecti

with crimping pliers 97 52 36 and self-adjusting insulation stripper 12 42 195 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening wh

ProRail3 accessory cable suspension 3 m white Problem solver: With this white wire cable rail suspension, the ProRail3 rail system can be mounted at a distance of up to 3 m from the ceiling. A system can also be installed in rooms with uneven ceilings, s

With SF/UTP DRAKA UC300 MHz cable Red cable, red RJ45 grommet 2 x Hirose TM11, Cat5e, halogen-free Foil and braid shields Assignment 1-3, 2-6, 3-1, 4-7, 5-8, 6-2, 7-4, 8-5

Combination/cable shears for copper and aluminium cable, with sharp, precision-ground blades, adjustable screwed joint. Length 140 mm Cutting force: Copper up to 10 mm in diameter Aluminium up to 24 mm in diameter

Small, light, strong: pleasant cutting without squeezing at only 160 mm size. Noticeably less effort required: The graduations cut wires one after the other, the cut is up to 40% lighter than standard cable cutters of the same length! Ergonomic leg design

F/UTP CAT 5e network cable, 1x 90° angled • Pair sequence in line with EIA/TIA 568 • With injection-moulded slim-line anti-kink sleeve, angled • Foil-shielded twisted pair cable • Inner conductor: 4 x 2 x AWG 26/7 CCA

Cable jacket knife, VDE-tested up to 1000 V. Insulated blade backs, with protective cap and sliding shoe on blade tip, as a result, there is no damage to the inner conductor insulation. Length: 180 mm

For hard wire cables, also suitable for cabling and round steel • Precise, effortless screwed joint • With safety catch Special blade geometry prevents the wire cable fanning out Chrome vanadium high-performance steel, oil-hardened and tempered

Cable shears for copper and aluminium cable. Sharp, hardened precision-ground blades, polished, no crushing, no deformation, adjustable screwed joint. Length: 164 mm Cutting force: Copper up to 15 mm in diameter Aluminium up to 50 mm in diameter

The NA-SEC1 is a fan accessory set consisting of three fully sleeved NA-EC1 30cm Extension Cables for 4-pin PWM fans. The NA-EC1 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required.

tool burnished, handles with multi-component grips Style 2: internal opening spring, protected and captive

Impact-resistant plastic enclosure • Universal stripping tool for coaxial cables RG 59, RG 6, RG 7, RG 11 • For stripping outer sheathing and interior insulation in a single process • Adjustable stripping blade for round cabling • Two stripping blades for

Knipex crimping die For KN 97 43. For insulated cable shoes 0.5-10 mm².

Single-handed crimping lever pliers from KNIPEX For non-insulated cable shoes from 0.5 to 10.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and

tool burnished, handles with multi-component grips for cutting and shortening cable ducts, also for plastic material up to 4.0 mm thickness special lever transmission very effective blade geometry tool body: high-grade chrome vanadium electric steel, oil-

Single-handed crimping lever pliers from KNIPEX For insulated cable shoes from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross section Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11 mm and 16 mm) easy adjust

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors • With threaded holes for cutting off copper or MS threaded pins with M 2.6/3.0/3.5/4.0 and 5.0 mm • Special steel, high

The Sonero X-PDC020-050 is a 5.00-metre-long DisplayPort cable that is compatible with the specifications of DisplayPort 1.4 and can be used for resolutions up to 8K/UltraHD-2/4320p at 60 Hz. The cable with an outer diameter of 7.3 mm (AWG28) has DisplayP

Linion accessories power supply cable black The unique Linion light channel system sets new standards when it comes to custom room lighting. With its aesthetic and clean design, the system provides attractive and fluid lighting that combines maximum flex

ProRail3 accessory cable suspension, 3 m, black Problem solver: With this black wire cable rail suspension, the ProRail3 rail system can be mounted at a distance of up to 3 m from the ceiling. A system can also be installed in rooms with uneven ceilings,

For stripping all standard coaxial cables from 4.8 to 7.5 mm in diameter (such as for TV and satellite reception), also suitable for PVC-Flex 3 x 0.75 mm² With length scale from 5.0 to 20.0 mm Two-level, hinged stripping tool With opening spring and lo

The NA-SYC2 is a fan accessory set consisting of two fully sleeved NA-YC2 Y-Cables for 3-pin fans. The NA-YC2 Y-Cables make it possible to run two 3-pin fans on a single fan header. Scope of Delivery 2x NA-YC2 Y-Cables

This industrial Ethernet cable by Delock can be used to connect various components with M12 connectors, e.g. for machine control or automation. Drag chain suitability The high-quality processed cable supports up to 10 million bending cycles, therefore it