Miscellaneous - Berger, Romagna Plastic, Sensor, Spring Light, V-Mark (28)

Multipower driver with dip-switch for selecting output current and output voltage This SELV 60 V JOLLY US 32 LED driver is a multipower device and the desired power can be set via DIP setting. With this JOLLY device it is possible to make settings from mi

Gaslock level indicator to determine the level of your butane or propane gas bottle (5 kg, 11 kg or 33 kg). Place the device in the upper part of the bottle (adheres by integrated magnets). A red light comes on when the push button is pressed. Remove the

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 2,0m

With the new LUXULA mounting clips, you can expand your standardised LED panels in sizes 60x60 cm, 62x62 cm or 120x30cm for ceiling installation, without being necessarily dependent on standard grid ceilings. In this way, the LED panels can also be easily

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 30,0m

A light fixture holder made of galvanised spring steel, suitable for LEANLED and SIGNALED light fixtures. The rear aluminium profile of the LED light fixture is simply clipped into the mounted spring clamps and thus withstands even strong vibrations. The

• for vertical or horizontal clamping • Precise clamping • 125 mm jaw width • Approx. 125 mm opening width • Weight approx. 4.4 kg Slot size W x L = 16 x 90 mm Slot spacing centre-to-centre = 149 mm

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

To insert and remove the retaining springs on wristwatch straps.

Anchor, metal, folding, with cable Folding anchor, grappling anchor Three serrated claws Locks via twist lock Dimensions (unfolded): approx. 15 x 19 cm (W x H) Dimensions (folded): approx. 7 x 19 cm (W x H) Cable: approx. 8 mm, 15 m Weight: approx. 950 g

Multipower driver with dip switch for selecting the output current This SELV 60 V JOLLY DALI 32 LED driver is a multipower device and the desired power can be set via DIP setting. With this JOLLY device it is possible to make settings from minimum 250 mA

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 5,0m

Gas level indicators - see at a glance how much gas is in the gas cylinder. Magnetic - so can easily be attached to the outside of the cylinder. Re-usable, easy to use, Fill level is displayed in colour from green to red. Dimension: W x H = 6 x 9.5 cm.

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

• for vertical or horizontal clamping • Precise clamping • 85 mm jaw width • Approx. 66 mm opening width • Weight approx. 2.43 kg Slot size W x L = 9 x 64 mm Slot spacing centre-to-centre = 96 mm

Small and light premium hammer with plastic and metal surface as well as metal handle.

To open screw-mounted watch cases. Incl. 12 bits with 4 different shapes for the most popular watch floors. Exact setting with thumb wheels.

Tangle-free L-Type Diamond Series Data Cable designed with innovative L-type tip preventing cable damage and does not get in the way when using the device while charging. . High speed transmission Fast Sync - Fast Charging (2.4A) Equipped with high qualit

This LED tester tests all lighting functions necessary for safe driving on vehicle trailer light sockets and trailer plugs. The LED indicates the respective defective wire colour. It checks all 7-pin sockets and plugs and includes two adapters for testing

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 15,0m

This Nedis 20 W USB-C™ fast car charger with power delivery allows you to charge any USB and USB-C™ device from your car's power outlet. The included USB-C™ cable with Lightning connector makes fast charging your iPhone easy. You can charge an iPhone 8 or

shiverpeaks®-BASIC-S-patch cable, cat.7 raw cable, RJ45 plugs cat.6, PIMF, NON-HALOGEN, purple, 1,0m

Subminiature incandescent lamp with cable

• for vertical or horizontal clamping • Precise clamping • 100 mm jaw width • Approx. 75 mm opening width • Weight approx. 2.9 kg Slot size W x L = 14 x 86 mm Slot spacing centre-to-centre = 130 mm

100-piece O-ring assortment for sealing after wristwatch repair. Contains the most important sealing rings. 100pcs. O-ring assortment for watches. In the most popular diameters: 10x approx. 16 mm, 12x approx. 18 mm, 14x approx. 20 mm, 18x approx. 22 mm, 1

Folds via twist lock Can be locked in various positions Total axe length: approx. 30 cm Total length: approx. 60 cm Weight: approx. 890 g Material: Pick head: carbon steel 1050 Handle beechwood

Trolley on castors, with three shelves.

Mounting clips for LED panels The clips allow easy mounting of LED panels. They are attached to the back of the LED panel and can be easily mounted on almost any surface. The clips are compatible with many models of backlight and sidelight panels thanks t