Miscellaneous - Bi-Silque, Printer Maniak, Romagna Plastic, Spring Light (31)

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 6 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

• 20 turns • Dielectric strength: 900 VAC

Waste toner container for Canon iPF TC-20

• 20 turns • Dielectric strength: 900 VAC

• 20 turns • Dielectric strength: 900 VAC

• 20 turns • Dielectric strength: 900 VAC

With the new LUXULA mounting clips, you can expand your standardised LED panels in sizes 60x60 cm, 62x62 cm or 120x30cm for ceiling installation, without being necessarily dependent on standard grid ceilings. In this way, the LED panels can also be easily

• 15 turns • Dielectric strength: 900 VAC

Suitable for wire cross-section 6 - 16 mm² Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 2 lengths Diameter of sheathed cable: 5.9 - 8.3 mm Method of attachment: push onto wire

A light fixture holder made of galvanised spring steel, suitable for LEANLED and SIGNALED light fixtures. The rear aluminium profile of the LED light fixture is simply clipped into the mounted spring clamps and thus withstands even strong vibrations. The

• 20 turns • Dielectric strength: 900 VAC

Process valve 2/2, NC, 24 VDC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: Plastic

• Dielectric strength: 900 VAC

• 20 turns • Dielectric strength: 900 VAC

• Very sturdy metal/plastic frame • Load capacity: Up to 80 kg • Printer level (W x D: 68 x 50 cm) • Intermediate level (W x D: 59 x 44 cm) • Base plate (W x D: 59 x 31.5 cm) • Space between levels: 31.5 cm each • Solid feet with level screws to stop the

Process valve 2/2, NC, 24 V DC Compact, directly operated 2/2-way solenoid valve For compressed air Electrical connection: DIN terminal Housing: plastic

More suitable: for wire cross-sections 0.75 - 1.5 mm² Marking method: thermal transfer Label: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 3 lengths Label surface: 5 x 23 mm Diameter of sheathed cable: 2.3 - 2.8 mm Met

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 9 lengths Strip width: 3 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

• 20 turns • Dielectric strength: 900 VAC

• 15 turns • Dielectric strength: 900 VAC

• 20 turns • Dielectric strength: 900 VAC

• 20 turns • Dielectric strength: 900 VAC

• 20 turns • Dielectric strength: 900 VAC

Suitable for wire cross-section 2.5 - 6 mm² Marking method: thermal transfer Imprint: not printed Delivery form: on roll Delivery format: 1000 markers per roll, 3 lengths Label surface: 7 x 26 mm Diameter of sheathed cable: 3.3 - 4.9 mm Method of a

• 20 turns • Dielectric strength: 900 VAC

• 20 turns • Dielectric strength: 900 VAC

• 20 turns • Dielectric strength: 900 VAC

• 100.000 cycles • Metal shaft / Bushing • Dielectric strength: 500 VAC • series: P231

Marking method: thermal transfer Imprint: not printed Self-adhesive Delivery form: roll Delivery format: 25 m, 5 lengths Strip width: 5 mm Method of attachment: gluing Printing device: Wago smart printer (thermal transfer printer)

• Sturdy metal/plastic frame • Printer level (W x D: 68 x 50 cm) • Intermediate level (W x D: 58.5 x 44 cm) • Base plate (W x D: 57.5 x 31.5 cm) • Moves on four castors, two of which are lockable • Level screws stop the printer stand tipping sideways • Ma

Mounting clips for LED panels The clips allow easy mounting of LED panels. They are attached to the back of the LED panel and can be easily mounted on almost any surface. The clips are compatible with many models of backlight and sidelight panels thanks t