Miscellaneous - Cable - Black Widow, CF Light, Combinatul Fondului Plastic, MM Spray, Noctua, Oakley, Sensor, TopBright, Weidmüller (50)

Signal light 220 V from MENTOR, LED Ø 5 mm Colour: green Connection: 10 cm cable VDE approval Protection class, front panel: IP40 Push-in fastening in the installation opening approximately Ø 10.3 mm Housing: transparent, white

The NA-SEC2 is a fan accessory set consisting of three fully sleeved NA-EC2 30cm Extension Cables for 3-pin fans. The NA-EC2 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required. Sco

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

The NA-SYC1 chromax.black set is a fan accessory kit consisting of three NA-YC1 Y cables. The NA-YC1 cables allow two 4-pin PWM fans to be operated on a single fan connection and the speed of both fans to be controlled by the motherboard at the same time.

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 3 6A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: red

Shielded PROFINET drag chain cable, M12 to RJ45 Ethernet connection cable with straight plugs. Pre-assembled IE wires M12, D-code, IP67, pin RJ45, IP20 Operating temperature: -40 to 70°C Length: 5 m

The NA-SYC1 is a fan accessory set consisting of two fully sleeved NA-YC1 Y-Cables for 4-pin PWM fans. The NA-YC1 Y-Cables make it possible to run two 4-pin PWM fans on a single fan header and to let the mainboard control the speed of both fans simultaneo

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

The SKINTOP ST comes into its own wherever cables and wires need to be inserted into an enclosure safely! Variety of accessories (e.g. multi-sealing inserts) Increased oil resistance for greater functional reliability Long-lasting vibration protection

Sensor/actuator connection cable M12, A-coded, 5-pin, M12 connector straight - free cable end, PVC-C, gray, shielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and convey

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: yellow

Mundan light ball, white, 300 mm, replaceable bulb Voltage: 230 VAC For E27 LED bulbs, max. 15 W UV-resistant With 3-m connection cable and plug Ground spike Material thickness: 3.3 mm For indoor and outdoor use Dimensions: Diameter: 300 mm

shiverpeaks® BASIC-S cable pull-in aid, nylon, 4 mm, 60 m Use the cable pull-in aid to easily pull your cable through a conduit. There is an eyelet on the GRP pull wire. The enclosed wire loop allows you to attach the cable to the eyelet. The screw-on hea

Power connector cable for our LED light strips, 8 mm wide (type 3528) DC 5.5/2.1 mm Cable length 190 mm

shiverpeaks®-BASIC-S--Cable routing aid, nylon, 3 mm, 15 m Use the cable routing aid to pull your cabling through ductwork effortlessly. The nylon pull wire features an eyelet that the cable can be attached to, and a guide spring to make it easier to neg

The SKINTOP ST comes into its own wherever cables and wires need to be inserted into an enclosure safely! Variety of accessories (e.g. multi-sealing inserts) Increased oil resistance for greater functional reliability Long-lasting vibration protection

Ideal for bundling cables, no more knotting. Without appropriate cable protection, a cable can hardly withstand today's requirements in terms of abrasion resistance, tensile strength, dimensional stability or impact resistance. LogiLink's flexible cable

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to a ground potential. cable with 1 megohm safety resistor with 2 push buttons 10/10 mm p

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 0.75 mm² • Plug: Ø 4 mm • Length: 30 m • Color: blue

EBP-Earth Bonding Point, EPA suitable. For working in electrostatically protected areas (ESD workplace/ESD protection zone). Earthing point for mounting underneath the table top. EBP / Earth Bonding Point = A common connection point to which ESD control e

The NA-SEC1 is a fan accessory set consisting of three fully sleeved NA-EC1 30cm Extension Cables for 4-pin PWM fans. The NA-EC1 cables provide ample reach for installing fans in larger enclosures and can be daisy-chained when more than 30cm are required.

This bronze pendant light makes an ideal addition to our vintage range. The integrated cable is adjustable up to a maximum of 150 cm, meaning that it adapts perfectly to your requirements. The steel base is very robust and promotes long-term use. The uniq

Earthing measurement cable, 4 mm connection, yellow, 50 m length, with cable reel

ESD discharge cable with integrated resistor. Spiral cable, 2x press-stud 10 mm/10 mm Length: 2.4 m

Power connector cable for our LED light strips, 10 mm wide (type 5050) DC 5.5/2.1 mm Cable length 190 mm

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Connecting cable, red/black, angled/straight 4 mm connection, for HIOKI multimeters from product series DT425x/DT428x or similar, CAT III 1000 V, CAT IV 600 V, 120 cm length

ESD discharge cable with integrated resistor. Spiral cable, 3 mm press-stud to 10 mm press-stud Length: 2.4 m

EPA suitable. For working in electrostatic protected areas (ESD workplace/ESD protection zone). For connecting the table and floor coverings and for connection to an earth potential. with 1 megohm safety resistor 2 push buttons 10 mm for mats or floor co

• Rated voltage: 1000 V CAT III • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: blue

Dome-shaped head in unique patented design with round, smooth edges. The stainless steel barb guarantees consistent performance, reliability and infinite variability over the entire bundle range.

The NA-SYC2 is a fan accessory set consisting of two fully sleeved NA-YC2 Y-Cables for 3-pin fans. The NA-YC2 Y-Cables make it possible to run two 3-pin fans on a single fan header. Scope of Delivery 2x NA-YC2 Y-Cables

Signal light 220 V from MENTOR, LED Ø 5 mm Colour: red Connection: 10 cm cable VDE approval Protection class, front panel: IP40 Push-in fastening in the installation opening approximately Ø 10.3 mm Housing: transparent, white

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

Anti-static ESD earthing wrist strap set ADJUSTABLE SIZE: comfortable hand strap, simply adjust to the required size SAFETY: stiff press stud for maximum safety of the connection to the solder mat. No quick, accidental removal or breaking off possible F

This Delock cable support is ideally suited to wall mounting for hanging laboratory cables or test equipment, enabling clear and tidy organisation. Specifications Cable support for wall mounting 2 x mounting holes Mounting hole diameter: approx. 8 mm 1

Sensor/actuator connection cable M12, A-coded, 5-pin, M12 plug straight - free cable end, PVC, gray, unshielded . PVC cable for use in control, regulation and sensor technology. Suitable for dry area use in packaging machines and assembly and conveyor te