Miscellaneous - BlackRapid, DAHLE, Transcend (38)

Engineered to deliver super fast data transfer speeds, the RDF5 USB 3.0 card reader features a SuperSpeed USB 3.0 interface and support for next-generation Ultra High Speed SDHC/SDXC and microSDHC/SDXC cards. Capable of being plugged directly into the USB

Dry cleaning with replaceable felt

3D NAND flash memory DDR3 DRAM cache Advanced global wear levelling and block management for outstanding reliability Built-in LDPC ECC (Error Correction Code) functionality Supports Advanced Garbage Collection, the S.M.A.R.T. function and security com

Whether photos, music, radio plays, films or entire books - the ever-evolving technology is constantly producing new media formats. Not only a lot of storage space is required, but also a higher speed so that the transmission of the larger amounts of data

These magnets are super practical for your home and for the office, allowing you to make creative ideas that seemed impossible a reality. Featuring super-strong neodymium magnets, Novus Dahle MEGA magnets make messages and objects stand out. Great for se

• Large shavings compartment for longer use before emptying • High-quality steel cutting head for professional results • Sturdy desk clamp for secure attachment to the desk • Automatic sharpening cut-out for a perfect tip • Self-locking pencil retainer wi

The SSD is intended to replace traditional 2.5'' 44-pin PATA hard disks and help older computer systems to achieve more performance and reliability. Transcend's PSD330 2.5'' PATA SSD is currently available in three sizes: 32 GB, 64 GB and 128 GB. The PSD3

• Large shavings compartment for longer use before emptying • High-quality steel cutting head for professional results • Sturdy desk clamp for secure attachment to the desk • Automatic sharpening cut-out for a perfect tip

• Basic board with white, lacquer-coated writing surface • For use with drywipe whiteboard markers • Magnetic writing surface • High-quality extruded aluminium frame with plastic corners for maximum stability • Lined board rear • Practical 30 cm tray for

• Basic board with white, lacquer-coated writing surface • For use with drywipe whiteboard markers • Magnetic writing surface • High-quality extruded aluminium frame with plastic corners for maximum stability • Lined board rear • Practical 30 cm tray for

• Integrated cutter for a perfect tip • Automatic sharpening cut-out for a perfect tip • Sturdy plastic enclosure for long service life • Two measuring devices for writing or drawing points • Integrated cleaning plug for a clean lead point • Suitable for

12 x felt strips, replacement for DAHLE 95099 wiper

With the RDF5 USB 3.0 card reader you can exhaust the full potential of your high-speed memory cards! The support of all common card formats in combination with the performance increase as a result of using USB 3.0 technology makes Transcend's USB 3.0 car

800x CompactFlash (Premium) Ideal for advanced camcorders and DSLR cameras Ultra-fast 800x performance Extra-large storage capacity of up to 256GB Manufactured with brand-name MLC NAND Flash chips Meet Video Performance Guarantee (VPG-20) specificatio

• Sturdy tripod easel with three fixing screws for firm standing • Infinitely variable height adjustment to optimum writing height (up to a total height of 187 cm) • White lacquer-coated, magnetic metal board in a sturdy aluminium frame for writing on wit

• Sturdy tripod easel with three fixing screws for firm standing • Infinitely variable height adjustment to optimum writing height (up to a total height of 187 cm) • White lacquer-coated, magnetic metal board in a sturdy aluminium frame for writing on wit

• Large shavings compartment for longer use before emptying • High-quality steel cutting head for professional results • Sturdy desk clamp for secure attachment to the desk • Automatic sharpening cut-out for a perfect tip

DIN A4 laminator with two heated silicone rollers Reliable lamination for permanent protection against moisture and dirt Two heated silicone rollers Heating time: 3 - 5 minutes Cold lamination possible Lamination in photo quality Working speed: 250 m

Polyamide cable ties, black, UV-resistant. Tensile strength: approx. 80 N at 2.5 mm, 130 - 180 N at 3.5 mm, 220 N at 4.5 mm. Length: 280 mm Width: 3.5 mm Pack of 100 pieces Note: these cable ties are always packed slightly moist to extend the shelf life.

With the RDF5 USB 3.0 card reader you can exhaust the full potential of your high-speed memory cards! The support of all common card formats in combination with the performance increase as a result of using USB 3.0 technology makes Transcend's USB 3.0 car

SATA III 6 Gb/s SSD230S The SATA III 6 Gb/s SSD230S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD230S delivers high performance and reliab

Professional A3 laminator with four silicone rollers and short heating time Reliable lamination for permanent protection against moisture and dirt Four silicone rollers, two of which are heated Heating time: ~40 seconds With automatic device shut-down

Professional A4 laminator with four silicone rollers and short heating time Reliable lamination for permanent protection against moisture and dirt Four silicone rollers, two of which are heated Heating time: ~30 seconds With automatic device shut-down

These magnets are super practical for your home and for the office, allowing you to make creative ideas that seemed impossible a reality. Featuring super-strong neodymium magnets, Novus Dahle MEGA magnets make messages and objects stand out. Geometric sh

For thorough cleaning of all magnetic boards, Magnetic

SATA III 6 Gb/s SSD230S The SATA III 6 Gb/s SSD230S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD230S delivers high performance and reliab

• Twin-hole pencil sharpener suitable for thick and thin pencils

Stylish and robust. Amazingly fast. The Transcend ESD370C is a handy solid-state drive with a sleek, navy blue silicone rubber enclosure that is durable, robust and shock-resistant. With a USB 3.1 Gen 2 interface and USB Type-C port, you can transfer data

• Large shavings compartment for longer use before emptying • High-quality steel cutting head for professional results • Sturdy desk clamp for secure attachment to the desk • Automatic sharpening cut-out for a perfect tip • Self-locking pencil retainer wi

Protected and ready. Transcend's StoreJet 25M3 robust external hard drive combines supreme shock-resistant qualities with the USB 3.1 Gen 1 interface, delivering ultra-fast file transfers and secure storage for your data. Robust and mobile The StoreJet

DIN A3 laminator with two heated silicone rollers Reliable lamination for permanent protection against moisture and dirt Two heated silicone rollers Heating time: ~40 seconds With automatic device shut-down after 30 minutes of no use Lamination in photo

The SATA III 6 Gb/s SSD220S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD220S delivers high performance and reliability. Unlimited 3D exten

• Large shavings compartment for longer use before emptying • High-quality steel cutting head for professional results • Sturdy desk clamp for secure attachment to the desk • Automatic sharpening cut-out for a perfect tip

Stay rugged. Stay trendy. Longevity does not always have to be at the expense of design. The StoreJet 25A3 external hard drive offers an impressive anti-shock system without compromising on its sleek appearance. With a USB 3.1 Gen 1 interface, a multifun

The SATA III 6 Gb/s SSD220S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD220S delivers high performance and reliability. Unlimited 3D exten

SATA III 6 Gb/s SSD230S The SATA III 6 Gb/s SSD230S from Transcend uses the latest 3D NAND technology, which stacks memory cells vertically. With high-quality flash memory and advanced firmware algorithms, the SSD230S delivers high performance and reliab

Combining the already impressive Class 10 specification with the performance boost of UHS-I, Transcend's Class 10 SDXC/SDHC Ultra High Speed memory cards help your camera unleash its full potential. When paired with UHS-I compatible devices, these cards o

3D NAND flash memory DDR3 DRAM cache Advanced global wear levelling and block management for outstanding reliability Built-in LDPC ECC (Error Correction Code) functionality Supports Advanced Garbage Collection, the S.M.A.R.T. function and security com