Miscellaneous - C-Tech, GoPro, Intenso, Knipex, Logic, Noiseblocker, Sensor (1,068)

With inserted tips for reliable work. Heavy duty in continuous operation: up to 10 times longer service life compared to turned tips. large contact faces on the tips: no distortion of circlips, easy fitting bolted joint: precise, zero backlash operation

High bending strength of the pliers tips. gripping surfaces cross-hatched, knurled vanadium electric steel- forged, oil-hardened

Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force. handle design prevents rolling chrome vanadium molybdenum steel

KNIPEX side cutters for universal use, with inductively hardened precision blades, polished head, standard bevel. Length: 160 mm. Plastic sleeves IEC 900 Cutting force: Soft wire up to 3.0 mm in diameter, hard wire up to 1.5 mm in diameter.

Pliers and wrench in one tool, ideal for gripping, holding, pressing and bending workpieces, also for the protective mounting of surface-coated fittings, Infinitely variable gripping of all wrench sizes up to 35/42, parallel-guided smooth gripping jaws. Q

High cutting capacity with little effort due to optimum co-ordination of cutting edge angle and transmission ratio. cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC chrome vanadium heavy-duty steel, forged, multi stage

Heavy-duty and hard-wearing gripping pliers. different jaw styles chrome vanadium electric steel, forged, oil-hardened

Self-adjusting crimping pliers for wire end ferrules with reduced grip width. For crimping wire end ferrules according to DIN 46228 parts 1 + 4 Self-adjustment to the required wire end size Consistently high crimping quality due to integral lock (self-re

6-piece tool set in plastic case for working on electronic devices. Contents: Gripping pliers 115 mm, side cutters 115 m, 1 x micro slot screwdriver 0.4 x 2.5/0.5 x 3.0/0.6 x 3.5/0.8 x 4.0mm, 1 x micro Philips screwdriver PH0/PH1.

With crimping tool for wire end sleeves 97 53 09 and KNIPEX PreciStrip16® 12 52 195. T-Loc lock for one-hand operation: open or close the systainer® with one twist and connect it to a second systainer®. Product advantages: In TANOS MINI-systainer® (sturdy

Precision circlip pliers For external circlips from 10 to 25 mm in diameter Length 125 mm, angled. Wear protective goggles when working with retaining rings.

Polished head, handles with multi-component casings, glass-fibre-reinforced • Precision ground blades with fine serration for a clean, non-slip cut • Blade with cable cutter • With plastic belt pouch • Universal shears for electricians • Handles with mult

Optimally suited for design fittings and other highly sensitive materials thanks to soft, smooth gripping surfaces. Allows use on chrome if the jaws of the pliers wrench have been damaged by improper or too rough use.

The indispensable cutting tool for multi-faceted use. High-quality material and precision processing for high durability. Precision cutting edges additionally inductively hardened, (cutting edge hardness approx. 62 HRC) for soft and hard wire. Clean cu

Protects against contact with a stripped live conductor (max. Ø 10 mm) solid plastic

Elastic tips: dimensionally stable even when twisted distortion-tolerant, elastic precision tips half-round, long, pointed jaws with cutting edges (hardness approx. 61 HRC) for soft, medium-hard and hard wire Vanadium electric steel, forged, multi stag

precision cutting edges for soft and hard wire as well as piano wire cuts bolts, nails, rivets, etc. up to 5.2 mm dia. most efficient joint design ensures exceptional cutting performance cutting edges additionally induction hardened, cutting edge hardn

Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. sturdy, zero backlash box joint low-friction double spring for gentle and even opening the polish together with a fine film of oil offer effective rust protection - n

Knipex compact case for electronic assembly. An essential collection of VDE tools for assembly work. 7-piece set in plastic case. Contents: 1 x combination pliers 180 mm VDE 1 x pantograph pliers 200 mm VDE 1 x alligator water pump pliers 180 mm 3 x screw

Electricians’ Gloves for added protection when working live or close to live parts classification: 0

Combination pliers, lightweight, with cutting edges for hard and soft wire, long cutting edges for thicker cable. Blades additionally inductively hardened. Length: 180 mm Head chrome-plated, handles VDE-insulated, 1000 V. Cutting force: Soft wire up to 3.

Pipe wrench by Knipex - slim, S-type jaw. jaws with offset teeth in opposite direction teeth additionally induction hardened three-point contact on pipes, self-locking I-beam handle design captive adjusting nut red powder coated, jaws bright ground

PWM (Pulse Width Modulation) technology Ball bearing mounted Copper core The fan with something extra. The ball-bearing-mounted 92-mm computer fan is extremely smooth. Don't leave anything to chance when cooling your components, this fan already has gro

Replacement blade with guide shoe for stripping knife 16 50 145 SB

Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too. a second pair of blades holds the remaining insulation reliably in place replaceable shaped blade adapted precisely t

handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist) gripping surfaces with special convex contour on one side for secure gripping of flat parts milled groove in the gripping area permits small parts such as n

Noiseblocker is the silent fan already made famous by the BlackSilentFan and UltraSilentFan series. The super-quiet fan significantly reduces the noise and vibrations generated in the housing. The previous series have already impressed with their outstand

Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force. handle design prevents rolling chrome vanadium molybdenum steel

Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force. handle design prevents rolling chrome vanadium molybdenum steel reduced blade isolation diameter for recessed spring and screw elements

light design made of hard-wearing, reinforced polyester fabric front additionally reinforced with aluminium brackets semi-fold-out front with adjustable loops and exterior document compartment with galvanized steel base tray with carrying handle and a

Cutting face flush ground. For nearly flush cutting of moulded plastic components from sprues. cuts soft materials such as lead in a flush cut with opening spring vanadium electric steel- forged, oil-hardened

90 23 01 E01 Spare blade for 90 23 01

Pipe wrench by Knipex - slim, S-type jaw. jaws with offset teeth in opposite direction teeth additionally induction hardened three-point contact on pipes, self-locking I-beam handle design captive adjusting nut red powder coated, jaws bright ground

35 % less effort required than with conventional combination pliers. with cutting edges (hardness approx. 63 HRC) for heavy duty easier work due to optimised leverage easier cutting, powerful gripping, bending and pulling long cutting edges for thicker

pliers black atramentized, head polished, handles with multi-component grips

Crimping pliers for wire end ferrules For crimping wire end ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm² Crimping in marked half-round dies for reliable connections between the sleeve and the conductor 9 particularly deep dies with coni

Suction Cup Mount Attach your GoPro to cars, boats, motorcycles and more. This industrial-strength Suction Cup mount is proven at speeds of 150+ mph and engineered for stability and a broad range of motion. The short extension arm allows for ultra-compac

For cutting cables, stripping wires and crimping insulated and non-insulated cable shoes and plug connectors and open plug connectors With threaded holes for cutting off copper or MS threaded pins with M 2.6/M 3/M 3.5/M 4 and M 5 Screw joint for a high le

Ergonomically optimised dual component handle for fatigue reduced work and optimum transmission of force. driving tips for PlusMinus profile screws use with electronics installation components, e.g. automatic circuit breakers reduced blade isolation dia