Miscellaneous - Cherry, PowerPlus, Romagna Plastic, Trend (57)

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Heller Trijet SDS-plus hammer drill bit Outstanding in terms of performance - masterful in terms of use Hammer drill bits in a whole new dimension: powerful, fast and durable Rotor cutting edge with three paddles for more effective material removal Enhanc

Solvent-free two-component adhesive on epoxy resin basis for highest loads. The processing time is up to 90 minutes. Curing time and final strength are temperature-dependent. At room temperature, solid after 12 hours. The bonded joint is impact-resistant,

Power Sensor Support for FPH handheld spectrum analyzer (unregistred software license).

Mounting shank For 68/68S/68W/80/80S/80W drill bits M16 external thread with holes for centre drill. Driven by SDS Plus shank Drill Ø 9 mm (Does not include drill bit)

UTG1042X The UTG1000X series offers precise and stable waveform output with a resolution of just 1 µHz. It is an economical, powerful and multifunctional function/arbitrary waveform generator. Accurate, stable, clean and low-distortion output signals can

The probes from the UT-H00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

Universal K-type temperature sensor Measurement range: -40°C ~ 1000°C Compatible with: • UT 61 series • UT 71 series

The probes from the UT-H00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

Solvent-free two-component epoxy resin-based adhesive for fast, resilient bonding. Enables high-strength bonded joints on almost all solid materials. The processing time is up to 5 minutes, and hand-tightness is achieved after 20 minutes. The final streng

The probes from the UT-H00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits descr

Nickel plated steel construction for strength & easy cleaning. Suitable for use with electric drills at speeds between 200 - 700 rpm.

Adapter plate which is connected on the bottom of a CarryMore unit and links together the unit with a power tool box.

The UTD1102C handheld oscilloscope offers ease of use, outstanding technical specifications and a wide range of advanced features. It can be operated either from an external AC power supply or from the integrated lithium battery. Its powerful trigger and

The probes from the UT-P00 series require the connected oscilloscope to have an input resistance of 1 MOhm. The test device used should have a warm-up time of at least 20 minutes and should be used in ambient conditions that do not exceed the limits desc

This self-levelling cross line laser with green LD lasers generates 3 laser lines a 360°. Due to the green laser diodes the lines are also well visible in bright environments and larger distances. The projection is done by one horizontal and 2 vertical la

The UT622C handheld LCR meter offers powerful features, a high degree of accuracy, fast measurement speed and long standby time. With a clear and intuitive 2.8-inch TFT LCD display, a large-capacity battery and a test frequency of up to 100 kHz, this devi