Miscellaneous - Clear-Lite, CnMemory, Durable, MM Spray, Osram, V-Tac (1,832)

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 12.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

ID card holder in open version for one company/security card Made from Blue Angel-certified recycled plastic Card holder can be used in portrait or landscape Can be combined with clip, textile lanyard or chain

Standard self-adhesive anti-slip tape for better safety of paths and tread surfaces Suitable for use indoors and in protected outdoor areas The anti-slip coating helps to secure paths and stairs Application areas are stairs, ramps, industrial floors an

Standard self-adhesive anti-slip tape for better safety of paths and tread surfaces Suitable for use indoors and in protected outdoor areas The anti-slip coating helps to secure paths and stairs Application areas are stairs, ramps, industrial floors an

Standard self-adhesive anti-slip tape for better safety of paths and tread surfaces Suitable for use indoors and in protected outdoor areas The anti-slip coating helps to secure paths and stairs Application areas are stairs, ramps, industrial floors an

Waterproof brochure sleeve made of polypropylene Made from at least 95% pre-use recycled plastic (industrial waste, offcuts and production remnants) Premium quality, 80 mµ With universal perforation for storage in folders and ring binders Open top Ori

ERSADUR soldering tip for i-CON TRACE soldering station

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

APEM - Indicator, LED Diameter: 8 mm Voltage: 12 V DC Bright Chrome LED: blue recessed IP67

Magnetic adapter, 4 mm, red

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

DNS® plus wood screw, flat countersunk head, 3.5 x 50 mm, full thread, SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-free screw

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

SMD-LED • small package • reflow solderable • power: 65 mW

Ultra-sharp titanium-coated blades deliver outstanding performance, year after year Non stick coating ensures blades stay clean, even when cutting adhesive materials High-quality stainless steel, made in Germany, with exceptional durability User-friendly

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

SMD-LED • for ambient temperatures up to 100 °C

Dust collector for masonry and concrete drills Prevents contamination of the room For plugging onto masonry drills For drill bits with a diameter of 4 - 10 mm

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

Comfortable rotary trimmers for professional use Sturdy metal table with non-slip rubber feet for high stability Handy format lines with mm divisions along the cutting edge of the panel simplify alignment of the workpiece Double guide rod for an absolut

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

Coarse self-adhesive anti-slip tape for better safety of paths and tread surfaces in industrial areas Suitable for use on stressed surfaces both indoors and in protected outdoor areas The anti-slip coating helps to secure paths and stairs The coarse gr

SRBZ Round brush with plaited wire

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm

R2 plus chipboard screw, pan head, 4.0 x 20 mm, full thread, TX 15, steel, galvanised, blue passivated, EN 14592: 2008+A1: 2012, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction, timber c

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red

magnetic adapter • Magnet diameter: 7 mm • Rated current: 12 A • Rated voltage: 33 V AC / 70 V DC • Color: red

Stannol desoldering wick NC-BB desoldering wick 0.8 mm x 1.5 m halogen-free Highly effective copper desoldering wick No subsequent cleaning required Coated with halogen-free flux-powder Fast desoldering ESD-safe spools (1.5-m spools only) Heat-resistant c

LG P47K PointLED® Description: With a diameter of just 2 mm, the PointLED is one of the smallest packages in its class and achieves high luminous efficacies. Due to its round and flat package, measuring only 0.775 mm high, it is ideal for application wher

Practical and sturdy desk tidy Large volume Blue Angel-certified recycled plastics have been used For pens, scissors, highlighters etc. Dimensions: diameter 80 mm, height 100 mm

90° HSS taper deburring countersink for M3 countersunk heads. 16.5 mm/M8 DIN 335 C HSS, with cylindrical shank and 3 blades, CBN deep-ground.

DNS® plus wood screw, flat countersunk head, 4.5 x 45 mm, partial thread (L1), SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-fr

RT Pico high-performance active soldering tip for the smallest microcomponents: 0402 to 01005 RT Pico soldering tips for WXPP/WXPP MS soldering irons Powerful active soldering tip for the smallest microcomponents: 0402 to 01005 Short distance between tip

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

OSRAM 2er-Pack Filament-LED. based on a E14-Socket opal bulb light current 470 lm by only 4 W nominal capacity

RT Pico high-performance active soldering tip for the smallest microcomponents: 0402 to 01005 RT Pico soldering tips for WXPP/WXPP MS soldering irons Powerful active soldering tip for the smallest microcomponents: 0402 to 01005 Short distance between tip