Miscellaneous - Clear-Lite, Knipex, MM Spray, MS-Tech, Osram (2,279)

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm. 12.5 mm Area of use: Steel, iron, cast iron, non-ferrous metal, plastics. In self-service pouch. Contents: 1 pieces

For safe handling of electronic components in fine applications: Allows controlled compensation of potential differences between operator and component Maximum comfort for frequent use Handles suitable for use in cleanrooms and controlled environments For

ERSADUR soldering tip for i-CON TRACE soldering station

HSS spiral drill bit Hex bit HSSG/ 1/4´´ (0.63 cm) bit drive (DIN 3126)

Knipex electronics pliers assortment In synthetic leather case. 7-piece tool kit for working on electronic components. Contents: 3x electronics gripping pliers 115 mm (3512115, 3522115, 3532115) 2x electronics side cutters 115 mm (7702115, 7742115) 1x ang

Single-handed crimping lever pliers from KNIPEX For wire end ferrules from 0.5 to 6.0 mm². Length: 220 mm New crimping pliers with precision profiles and self-releasing lock offer amazingly high force strengthening despite compact dimensions and with exce

Magnetic adapter, 4 mm, red

Automatic stripping pliers: 2.5 - 10.0 mm² These innovative patented universal stripping pliers are suitable for precise, damage-free stripping and unsheathing of all electronic single and multi-conductor cabling, in particular also with PTFE insulation.

WELLER replacement tip XTA, 1.6 mm, chisel-shaped

ERSADUR soldering tips • Chisel-shaped • 3.2 mm Suitable for following ERSA soldering iron/stations: • Analogue 60 / 60 A • Analogue 80 / 80 A • Twin 80 A with Ergotool • Dig 20 A 84 • ELS 8000 / 8000M / 8000D • MS 6000 • MS 8000 / 8000D • RDS-80 • Multi-

Power adhesive. Glue sticks Ø 11 mm ULTRA Power, for bonding various materials, particularly powerful universal adhesive. Sets solid after only 15 seconds, and the bonding surface can be loaded after approx. 60 - 90 seconds. Can be removed with hot air wi

Replaces the need for sets of metric and imperial spanners. Smooth jaws for damage free installation of plated fittings - working directly on chrome! Adjustable tightening tool. Also excellent for gripping, holding, pressing and bending workpieces. Push t

with crimping pliers 97 22 240 in a TANOS MINI-systainer® (solid plastic box) T-Loc fastener for one-handed operation: open or close the systainer® with one turn and connect to a second systainer® opening when connected: fast and simple access to content

KNIPEX side cutters for universal use, with inductively hardened precision blades, polished head, standard bevel. Length: 180 mm Plastic sleeves VDE-insulated 1000 V, IEC 900 Cutting force: Soft wire up to 2.5 mm in diameter, Hard wire up to 4.0 mm in dia

pliers chrome plated, handles with multi-component grips

Attachment line Safe and tested: safety tested in numerous drop tests for tools up to 6 kg, including battery-powered Large working radius: stretches from approx. 900 to 1400 millimetres cord length for comfortable working Versatile: with flexible adapt

DNS® plus wood screw, flat countersunk head, 3.5 x 50 mm, full thread, SIT® 20, steel, galvanised, blue passivated, ETA-11/0106, 200 pcs. Description DNS® plus wood screw - the new standard PRODUCT FEATURES: SIT® Fast drive connection Wobble-free screw

HSS spiral drill bit Hex bit HSSG/ 1/4´´ 6.3 mm bit drive (DIN 3126)

SMD-LED • small package • reflow solderable • power: 65 mW

pliers chrome plated, handles with multi-component grips

Electronic side cutters, Super-Knips. Play-free joint, extremely effortless motion, precision-milled. cutting edges without grinding, with opening spring and limiter. Length 125 mm, narrow head, without bevel Cutting force: soft wire from 0.2 to 1.0 mm in

Ultra-sharp titanium-coated blades deliver outstanding performance, year after year Non stick coating ensures blades stay clean, even when cutting adhesive materials High-quality stainless steel, made in Germany, with exceptional durability User-friendly

Wiring pliers for gripping, bending and stripping insulation from wires from 0.5 - 0.75/1.5 and 2.5 mm² as well as for crimping wire end ferrules 0.75/1.5/2.5mm².

The Solder-Ex desoldering strand has been developed for the repair of soldered joints. It consists of a copper braid and is coated with a special halogen-free flux, which accelerates the absorption of solder. The Stannol Solder-Ex desoldering strand is pl

For very tough, continuous use. high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio precision cutting edges additionally induction hardened (cutting edge hardness approx. 64 HRC), for

SMD-LED • for ambient temperatures up to 100 °C

More output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 % more gripping capacity. good access to the workpiece due to slim size of head and joint area self-locking on pipes and nuts: no

Knipex mini-pliers wrench Pliers and wrench in one tool with parallel-guided gripping jaws, quick adjustment by pushing a button directly on the workpiece. Ideal for gripping, holding, pressing and bending workpieces. Infinitely variable gripping of all w

Circlip Pliers Sets 4 parts tool roll made of hard-wearing polyester fabric with practical, adjustable quick release fastener

Dust collector for masonry and concrete drills Prevents contamination of the room For plugging onto masonry drills For drill bits with a diameter of 4 - 10 mm

• Rated voltage: 250 V CAT II • Rated current: 2 A to 36 A (with 2,5 mm², fully unrolled) • Cable: 1,5 mm² • Plug: Ø 4 mm • Length: 50 m • Color: red

Comfortable rotary trimmers for professional use Sturdy metal table with non-slip rubber feet for high stability Handy format lines with mm divisions along the cutting edge of the panel simplify alignment of the workpiece Double guide rod for an absolut

The Solder-Ex desoldering wick has been developed for the repair of solder joints. It consists of a copper wick and is coated with a special halogen-free flux, which accelerates solder absorption. The Stannol Solder-Ex desoldering wick is placed on the so

The ULTIMATECUT Multidrill revolutionises the working process and sets new standards in processing time, saving up to 75% time. The Multidrill from RUKO achieves this through its revolutionary cutting edge geometry by combining the most diverse applicatio

This type is a line laser for the projection of a laser line. This diode laser module is a very small and effective laser source. The laser module creates a sharp line through special optics and does not require rotating polygon mirrors or motors. The lin

SRBZ Round brush with plaited wire

Stylish fan with RGB effects 26 RGB LEDs Vibration-free operation thanks to rubberised supports Connection via 4-pin PWM Colour control via 3-pin 5-V RGB header on the motherboard The smooth-running 140-mm RGB LED fan from Argus offers a stylish effect

9412 Textile Box 6001 for 11 Joker switch, empty, 180 x 88 x 46 mm

R2 plus chipboard screw, pan head, 4.0 x 20 mm, full thread, TX 15, steel, galvanised, blue passivated, EN 14592: 2008+A1: 2012, 200 pcs. Description R2 plus chipboard screw - for universal application in interior design, furniture construction, timber c

magnetic adapter • Magnet diameter: 9 mm • Rated current: 12 A • Rated voltage: 33 V AC / 90 V DC • Color: red